Particulate Sampler Equipment For Monitoring And Testing Near Malaysia
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate High Volume Air Sampling System Includes: Anodized aluminum shelter, 8' x 10' stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe and digital timer with digital elapsed time indicator (110V/50hz ...
-
Manufactured by Tisch Environmental Incbased in USA
TSP Tri-pod High Volume Air sampler: Complete with outdoor anodized aluminum tri-pod shelter, aluminum blower motor assembly, 8' x 10' stainless steel filter holder, 30' slack tube manometer, and motor speed voltage control/elapsed time indicator (110v/60hz or ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
Manufactured by AirMetricsbased in USA
TSP Sampling Procedures for TSP sampling, the following changes must be made to the filter ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
Manufactured by Tisch Environmental Incbased in USA
PUF for Pesticide Particulate/Vapor Air Sampler: Complete with outdoor anodized aluminum PUF shelter, aluminum blower motor assembly, 4' particulate/vapor sampling module, flow venturi calibration valve system, 0-100' magnehelic gage, motor voltage control/elapsed time indicator, (10' exhaust hose, and 7-day mechanical timer (110v/60hz or ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets the definition set forth by ACGIH for inhalable particulate. The ...
-
Manufactured by Mesa Laboratories, Inc.based in USA
The BGI tetraCal® is a simple-to-use standard for volumetric airflow, barometric pressure, and ambient temperature. The tetraCal is a venturi based system with built-in compensation for changes in ambient temperature and pressure. All tetraCal systems are built and tested at Mesa which is a NIST traceable Calibration Laboratory. Calibration of particulate samplers and industrial hygiene , ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
Manufactured by SKC Asia HSE Sampling Technologies Pte Ltdbased in SINGAPORE
Discover the perfect combination of features and power in this compact, lightweight pump that gets the job done. The AirChek® XR5000 personal air sampling pump with Li-Ion battery provides powerful flows for particulate sampling, low flows for gas and vapor sampling, and the long run-times for low-concentration sampling. The AirChek XR5000 air sampling pump is UL Listed for intrinsic safety. ...
-
Manufactured by Eigenbrodt GmbH & Co. KGbased in GERMANY
recipitation contains a high amount of organic, inorganic and suspended substances. It is believed to be the major atmospheric purification process and has a high contribution to the trace element cycle in the atmosphere. The PRECIPITATION SAMPLER NSA 181 is equipped with a cover lid for a wet only application. This lid is opened only during deposition. So now it is possible to catch the wet ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The HiVol 3000 particulate sampler performs remote unattended sampling of PM2.5, PM10 or TSP along with basic meteorological parameters. The HiVol 3000 incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly representative sample of particulate matter. Optional attachments allow the sampler to measure wind speed and ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The MegaVol 3000 particulate sampler performs remote unattended sampling of particulates and is ideal for heavy metal and radiation exposure ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
Distributed by Petro-Instruments Corp, Ltd.based in THAILAND
All TSP High Volume Air Samplers feature accurate collection of total suspended particulate exceeding US EPA Specifications. Air flow through the system is maintained at a constant rate by an electronic probe which automatically adjusts the speed of the sampler to correct for variations in line voltage temperature, pressure and filter loading. Adjustable over range from 20 SCFM to 60 SCFM the air ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
Automatic weighing system for the gravimetric assessment of SPM filters; The automatic weighing system AWS-1 weighs up to 320 suspended particulate matter (SPM) filters (diameter 47 mm) in an automated process according to EN 12341:2014 (PM10 and PM2.5). The weighing results are recorded in a database along with relevant ancillary data, such as temperature and relative humidity. Automation ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The PNS T-DM combines a low / medium volume sampler (LVS or MVS) and a filter changer in a stainless steel cabinet. It collects fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the system fractionates the airborne particles in a sampling inlet. The air containing the desired fine particulate fraction ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The low and medium volume samplers LVS and MVS collect fine particulate matter on sampling filters according to EN 12341:2014 (PM10 and PM2.5). For this purpose, a vacuum pump draws in ambient air, and the sampler fractionates the airborne fine particles in a sampling inlet. The air containing the desired fine particulate fraction then passes through the filter, where the particles are collected ...
-
Distributed by Has Environmentalbased in INDONESIA
Single channel design for maximum reliability and portability. Friendly operator interface and easy data collection and downloading. Includes built-in 12-volt DC battery power system charger (U.L. approved). Advanced flow control system. Download software ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you