Passive Sampling Equipment For Monitoring And Testing Available In Canada
-
Distributed by Veris Industriesbased in USA
CDL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CDL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy and ensuring tenant ...
-
Manufactured by Sinton Instrumentsbased in USA
The WCT-120PL wafer lifetime measurement tool showcases the same unique measurement and analysis techniques as the WCT-120 with the added capability of a photoluminescence (PL) detector to measure the PL lifetime and doping of the sample under test. Both the Quasi-Steady-State -Photoconductance (QSSPC) lifetimae measurement method and the Transient Photo-conductance Decay (PCD) lifetime ...
-
Manufactured by Sensor Electronics Corporationbased in USA
The SEC Millenium Infrared Hydrocarbon Gas Detector is a complete self contained optical hydrocarbon gas detector. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. The SEC Millenium Hydrocarbon infrared gas detector can operate as a stand-alone 4-20mA gas detector or it can be coupled with an SEC 3100 Universal Transmitter or SEC 3100 ...
-
Manufactured by Hangzhou Nihao Environmental Tech Co.,Ltdbased in CHINA
The Tube Fine Bubble Diffusers increase the oxygen transfer efficiency while decreasing the power consumption to provide the same quality of effluent water. The diffusers can be used to create zones with high oxygen concentrations (anoxic or aerobic), minimal oxygen concentration (anoxic), and no oxygen (anaerobic), offering plant operator a great deal of operational ...
-
based in UNITED KINGDOM
pk ...
-
Manufactured by IFU Diffusions- und Umwelttechnik GmbHbased in GERMANY
Fine bubble membrane tube diffuser for lift-out systems. Especially for replacement of ceramic ...
-
Manufactured by Restek Corporationbased in USA
High-quality vacuum gauges with 316 stainless steel wetted surfaces.–30"Hg to 0"Hg. Recommended for use with passive sampling kits. All are rear ...
-
Manufactured by Nanjing Kelisaike Safety Equipment Co., Ltd.based in CHINA
The K60 series gas detector is a full featured device with unequalled cost efficiency. The detector is warranted for one year and maintenance free, including a battery replacement ...
-
Manufactured by Novocontrol Technologies GmbH & Co. KGbased in GERMANY
Test Interface for Dielectric, Conductivity, Impedance 2, 3 and 4 Electrode Spectroscopy and Gain Phase Measurements for Alpha-A Modular Measurement System. The ZG4 extension test interface for the Alpha-A modular measurement system features high quality general purpose dielectric, conductivity, impedance 2, 3 and 4 electrode spectroscopy and gain phase measurements. 3 or 4 electrode techniques ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
Perfect NDIR CH4 IR Measurement Flame Leak Detector Sensor SJH is based on NDIR technology that is superior to thermal catalysis and heat conduction technology, and can detect 0 to 100% methane (CH4) concentration. It has the advantages of convenient operation, accurate measurement, reliable operation, simultaneous output of voltage and serial port, and dual beam design. To meet the different ...
-
Manufactured by Sigma-Aldrichbased in USA
Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population to ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Ersin Groupbased in TURKEY
Aquaflex Coarse Bubble Tube Diffuser is used to provide a homogeneous mixture in chemical preservation units, equalization tanks, chemical mixing and oil separation of wastewater treatment plants. The projection of each diffusers of Aquaflex was done after Research and Development studies that response the requests of waste water treatment plants. Materials used in Aquaflex diffusers are ...
-
Manufactured by Camsco, Incbased in USA
Our Sampling Kit is designed for you to be able to carry out one complete 14 day sampling event. Everything you need for deploying, harvesting, and shipping samples to the laboratory is contained in this ...
-
Manufactured by Entech Instruments, Inc.based in USA
Introducing the latest HDS™ (Helium Diffusion Sampling) Personal Monitor from Entech. A breakthrough technology based on helium diffusion which yields a sampler that is small, light weight, cost-effective, universal, and defensible. HDS™ Personal Monitors simplify the collection of chemicals in the workplace and deliver highly reliable results unaffected by factors that create errors in other ...
-
Manufactured by Jäger Umwelt-Technik GmbHbased in GERMANY
The JetFlex® TD series of tube air diffuser is a fine bubble aeration system that uses compressed air. Our tube diffuser combine cost-effective design, low installation and maintenance costs with reliability, durability and efficiency. They are suitable for both intermittent and continuous operation. We also offer replacement membranes to increase efficiency in existing aeration ...
-
Manufactured by Puroxi Pure Water Global Inc.based in CANADA
Kasco's Robust-Aire™ systems are quiet and provide great aeration benefits in depths of 8 ft. or greater. A shore-mounted compressor pushes air through self-weighted lines to a dual-loop diffuser on the pond, lake, or tank bottom. The diffuser then continuously releases micro-bubbles that rise to the surface carrying large volumes of ...
-
Manufactured by Exposmeter ABbased in SWEDEN
EWL, EWL-15, EAL and EGL series samplers are packed by one in air tight ...
-
Manufactured by Geoteck-Tierre srlbased in ITALY
The microbubble disc diffuser is particularly suitable for the production of “carpet” diffusion systems and for all those basins whose geometric shape makes the use of tube diffusers ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Material Features: Simplex or duplex configuration. Designed for high airflow capacity. Available in 24-inch length (610 mm). Clog resistant self-purge design. Full 48-inch air release perimeter (1220 mm). Standard units in stock for immediate shipment. Standard open bottom with optional closed bottom units available. PVC or optional CPVC construction for maximum chemical and temperature ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you