Passive Sampling Equipment For Monitoring And Testing Near Virginia
-
Manufactured by SSI Aeration, Inc.based in USA
Highest possible quality and technology means years of trouble-free efficient operation. Highest possible SOTE independently tested per ASCE and lowest possible headloss. Compression molded EPDM membranes have very tight wall thickness tolerances, a long track record and exhibit even air distribution and minimal shrinkage over time. One-piece lightweight but strong ABS body makes handling during ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
-
Manufactured by SSI Aeration, Inc.based in USA
SSI Aeration Patented Exclusive: The Snappy Saddle™ features a single seal that reduces risk of leakage by 50% and simplifies installation. Only requires one person to install. Available up to 7’-3” (2.2m) long in a single piece. ...
-
Manufactured by SSI Aeration, Inc.based in USA
SSI Aeration, Inc.’s ECT70 tube diffusers provide low pressure loss, high oxygen transfer efficiency and ease of installation. We created this diffuser to offer you the highest quality product at the most affordable price. The production method slashes the labor cost of manufacturing by 75% without sacrificing quality. How do we do that? We use the same high quality membrane that we ...
-
Manufactured by Thermtest Inc.based in CANADA
Versatile measurement platform with accurate methods for thermal conductivity, thermal diffusivity, specific heat and thermal effusivity of solids, liquids, pastes and ...
-
Manufactured by Thermtest Inc.based in CANADA
The TPS-2 transient plane source is designed to test the absolute thermal conductivity, thermal diffusivity, specific heat of solids, pastes, viscous liquids and powders. Best for solids, pastes, and ...
-
Manufactured by Thermtest Inc.based in CANADA
A transient plane source (TPS-3) for testing the thermal conductivity, thermal diffusivity and specific heat of solids, pastes and powders for customers with a limited budget. Best for solids, pastes, and ...
-
Manufactured by Climet Instruments Companybased in USA
High Pressure Diffuser Adapter head for the CI-90A or CI-95A microbial sampler. Used for sampling high pressure gases. Connects to a Climet CI-302 High Pressure ...
-
Manufactured by Climet Instruments Companybased in USA
In business for over 55 years, Climet has dozens of multi-jurisdictional patents in the field of particle counting. The CI-302 is compliant with ISO 8573-4, and is ...
-
Manufactured by Climet Instruments Companybased in USA
Pharmaceutical Grade - Our Most Popular Model: In manufacture for over a decade, the CI-9x Series of microbial samplers is the only model manufactured to meet or exceed all ISO 14698 standards and recommendations. Eliminate or mitigate deviation reports and investigations due to interval calibration out-of-tolerance conditions. In business for over 55 years, Climet has dozens of ...
-
Manufactured by Climet Instruments Companybased in USA
Pharmaceutical Grade with Built-in Label Printer: In manufacture for over a decade, the CI-9x Series of microbial samplers is manufactured to meet or exceed all ISO 14698 standards and recommendations. Eliminate or mitigate deviation reports and investigations due to interval calibration out-of-tolerance conditions. In business for over 55 years, Climet has dozens of multi-jurisdictional patents ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population to ...
-
Manufactured by Sigma-Aldrichbased in USA
A polypropylene protective outdoor shelter is available for housing up to four Radiello samplers during outdoor/ambient air sampling. The shelter allows for adequate ventilation while simultaneously protecting the samplers from harsh weather conditions. The shelter can be mounted to a variety of fixtures including lamp posts, traffic lights, and telephone poles of various diameters. The shelter ...
-
Manufactured by Sigma-Aldrichbased in USA
Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3. Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Diffusive Bodies white, configured for general use, pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
The diffusive bodies are designed to house Radiello cartridge adsorbents during sampling. The diffusive bodies are threaded at one end for easy attachment to the Radiello triangular support plate. Unlike most of the cartridge adsorbents, the diffusive bodies are reusable and can be cleaned with a mild detergent between use. The diffusive bodies will collect dust (especially during outdoor ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Filtration Kit pk of 20. The filtration kit consists of graduated polyproylene syringe barrels and 13 mm diamater syringe filters with 0.45 μ,m porosity. The filtration kit is ideal for filtering aqueous samples prior to reversed-phase HPLC and ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Vertical Adapter non-threaded for ready-to-use samplers, pk of 20. For personal sampling (breathing zone assessment) a vertical adapter is available to position the Radiello diffusive body vertically on the Radiello triangular support ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you