Piezometers Equipment For Monitoring And Testing In Africa
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well pipes are used to compose monitoring wells and piezometers. Monitoring well pipes are available in different materials and diameters, and are supplied in PE ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Micro-DiverCompact water level logger for Groundwater Monitoring. Easy to use water level logger. Perfect for pump and slug tests. Easy to install in small diameter wells. Available in various measuring ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
To protect monitoring wells (and piezometers) against traffic, destruction, contamination and weather effects, various protective materials are ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 601 Standpipe Piezometer is excellent for taking water level measurements. The PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits and pre-augered holes. It uses a porous polyethylene filter inside a perforated PVC tip which connects to the surface with 3/4" (19 mm) ID PVC ...
-
Manufactured by HERON Instruments Inc.based in CANADA
A small, low-cost water level meter with all the quality features of the larger units. The fully submersible standard 5/8 inch (16 mm) diameter probe makes it an ideal instrument for narrow piezometers, direct push equipment and standpipes. The compact size and light weight of the little dipper is an advantage for carry in sites where portability is a ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW206 is a vibrating-wire analyzer module that includes an internal 910 to 918 MHz spread-spectrum radio for wireless communication, typically used in the U.S. and Canada. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW211 is a vibrating-wire analyzer module that includes an internal 920 to 928 MHz spread-spectrum radio for wireless communication, typically used in Australia and New Zealand. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 615 Drive-Point Piezometers are cost-effective for initial site investigations, plume delineations, and as low-cost mini well points. They are excellent for groundwater or soil gas sampling, underground storage tank monitoring, and as sparge points. The stainless steel piezometer point has a 50 mesh screen and a 3/4" NPT riser pipe. An inner sampling tube can be used if higher quality samples ...
-
Manufactured by Eno Scientificbased in USA
The Well Sounder 2010 PRO is a sonic water level meter, designed and manufactured by Eno Scientific, to measure static water level in wells, piezometers or boreholes. This portable handheld unit uses sound waves to measure the distance from the top of the well to the water level. This eliminates the need to lower anything into the well. Unlike standard water level tapes these acoustic meters are ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Model 615 ML Multilevel Drive-Point Piezometer system can provide several monitoring zones in one drive location. The 615 ML Ports have a dual barbed stem that allows the connection of either 3/8" OD or 1/4" OD tubing to create up to 3 or 6 monitoring zones, respectively. The 615 ML Multilevel System is installed using extensions and a Manual Slide Hammer, similar to standard 615 ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The SKINNY DIPPER water level meter is equipped with a ¼” probe and a ¼” extruded polyethylene tape that is reinforced with Kevlar, making it ideal for use in narrow tubes and piezometers. ...
-
Manufactured by POL-EKO A.Polok-Kowalska sp.k.based in POLAND
Storage of water and sewage samples, piezometer leachate. Storage of aas, gc or hplc calibration standards. Storage of reagents. Chemical storage. Storage of medicines and ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Laser Marked Model 102 Water Level Indicator is designed to accurately measure groundwater levels in small diameter ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Solinst Sonic Water Level Meter is a portable, acoustic ranging instrument designed to simply and quickly measure depth to static water level in a well, piezometer, sounding tube, or any closed ...
-
Manufactured by Campbell Scientific, Inc.based in USA
With an AVW200 vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, hydrological, and geotechnical applications because of their stability, accuracy, and durability. The VSPECT technology is protected under U.S. Patent No. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AVW216 is a vibrating-wire analyzer module that includes an internal 2.4 GHz spread-spectrum radio for wireless communication in many countries worldwide. With this vibrating-wire analyzer module, your data logger can measure vibrating-wire strain gages, pressure transducers, piezometers, tiltmeters, crackmeters, and load cells. These sensors are used in a wide variety of structural, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you