Pipe Flow Monitoring Equipment For Monitoring And Testing Available In Northern Ireland
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by Shenzhen Uniarms Technology Co., Ltd.based in CHINA
Clamp on type small pipe flow meter for fluids in factory environments and common use for residential and agriculture ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The VORTAB VMR Meter Run flow conditioner provides a low pressure loss solution to flow profile irregularities caused by elbows, valves, blowers, compressors and other disruptions that commonly occur in piping and duct runs. The VSR Meter Run configuration is available for those applications that require lengths shorter than the VMR ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement in slight to heavily polluted media. Designed for fastening in pipes using a ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
High accurate for full pipes: Cost-efficient alternative to conventional EMFs/mag meters. For continuous flow measurement in slight to heavily polluted media in full pipes less than DN ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For measurements under difficult measurement conditions. Unrivalled light weight and short mounting length, unit can be installed by only one person. High accurate measurement in full pipes. Versatile use in pipes with various ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For use in pipelines. For full pipes. Ideal for flow measurement of process water and dirty water lines as well as hydropower ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For pipe ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous solids mass flow measurement in dense-stream conveying and high levels of throughput. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. No wear thanks to the ceramic inner ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation in pipes up to 5000 mm ...
-
PremiumManufactured by ENVEAbased in FRANCE
Contact-less and maintenance free measurement of high mass flow rates of dry bulk solids independent of pipe ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes Medium measurement range for levels up to ca. 1m. Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes. POA flow velocity sensors are suitable for continuous measurement of slight to ...
-
Manufactured by Trimec Europe Ltdbased in UNITED KINGDOM
Trimec LCD display FRT is a fully programmable self-powered flow rate totaliser specifically designed for computing & displaying flow rates & totals from flow meters with pulse, sine wave or frequency outputs. The instrument displays accumulated total and instantaneous flow rate in engineering units as programmed by the user. ...
-
Manufactured by Eletta Flow ABbased in SWEDEN
The V Series comes without local indication as standard. A small indicating window can be quoted as alternative. V series has one micro switch set-point, it is adjustable within the flow range of the monitor. You can easily up-grade a V-series to a flow monitor with local indication or analog output by changing the indicating unit as the different series uses the same pipe-sections. The ...
-
Manufactured by Nixon Flowmeters Limitedbased in UNITED KINGDOM
Works from outside a Pipe with Strap-on-Sensor. User-Friendly, 3-Key Calibration. Password Protected. Isolated 4-20mA Output. 3 Control Relays. Self-Testing, Surge-Protected. RFI Rejection Filters. Optional Data ...
-
Manufactured by Oxygen Generating Systems Intl. (OGSI), A part of NOVAIR Groupbased in USA
OGSI full range of High Pressure Filling Units is designed to fill every day up to more than 100 cylinders of medical oxygen. Filling pressure ranges from 1500 psig (100 barg) to 2900 psig (200 barg). Connected to an OGSI oxygen generator, they complete the oxygen plant by providing total autonomy to end-users. ...
-
Manufactured by PlugCo - a brand by ArGesim Makinabased in TURKEY
Flow Through Packer is a double layer reinforced rubber used to repair pipelines while bypassing the flow through its bypass connection and allows the subsurface system to keep running during the repair. This system is ideally suited to avoid costly and time-consuming ...
-
Manufactured by Parkson Corporationbased in USA
Parkson offers two options for liquid removal from water and wastewater basins; effluent and supernatant decanters. The Parkson DynaCanterâ„¢ is a floating style decanter used to remove treated effluent or supernatant from the upper portion of the basin. The decanter utilizes a flex joint to allow vertical articulation as water levels move between high and low water levels. The decanter collects ...
-
Manufactured by Potential Engineeringbased in INDIA
Supernatant decanter is of floating type and is used to remove supernatant from upper portion of the basin. It collects water from below the top surface to preclude foam, scum or other floatables. A standard open/close valve is used in the discharge piping to control the flow rate from the decanter. No electro-mechanical component are used inside the tank, thus making the operation & ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you