Pipe Locating Services For Monitoring And Testing Available In Asia & Middle East
-
Premiumbased in USA
We run a cutting-edge, brand agnostic laboratory with specialty testing and metrology. What is calibration? Calibration is the comparison of a measurement device or an instrument against a known standard. The standard in a measurement is considered to be the more correct of the two and one would calibrate the device under test to know how far it deviates from the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
SeViRO - locate plastic piping safely with Sewerin vibration pipe detection. For operators of pipe networks with plastic pipes, the SeViRO offers optimum detection results when the pipe path is unknown. This acoustic method is suitable for detecting pipes filled with liquids or gases. Required for detection is a contact point to the medium that already exists or can be made at a known position ...
-
Manufactured by MTA Messtechnik GmbHbased in AUSTRIA
When plans ar inaccurate or missing It is often necessary to locate pipes. With special pipe location methods it is possible to locate all lines precisely metallic and ...
-
Manufactured by Heitman Laboratories, Incbased in USA
Heitman Laboratories is the manufacturer and the only authorized repair center for the RD500 Pipe Locating System, the Aquatrac 50 Pipe Locating System, the Aquatrac 100 pipe Locating System, as well as our private label lines, the Model P50 PipeTool™ and the Model P100 PipeTool™. We handle both warranty services and repairs for all of our Plastic Pipe Locator Systems and TransOnde ...
-
Distributed by AquaPro Solutions, LLCbased in USA
AquaPro Solutions is a fully licensed residential and commercial plumbing and gas piping contractor located in Asheville, NC. From minor repairs to emergency service to major construction projects, our knowledgeable and professional team is always available to assist you. AquaPro Solutions works directly with architects, engineers, contractors, businesses, and home owners to promote water ...
-
Manufactured by Oil & Gas Technologies (OG-TECH)based in FRANCE
Leak Detection And Repair (LDAR) is a work practice designed to identify leaking equipment so that emissions can be reduced through repairs. A component that is subject to LDAR requirements must be monitored at specified, regular intervals to determine whether it is leaking or not. Any leaking component must then be repaired or replaced within a specified time ...
-
Manufactured by Electro Scan Inc.based in USA
Electro Scan (UK) Ltd. is delighted to announce multi-sensor, machine-intelligent pressurised clean water pipe inspection featuring its patented low voltage conductivity technology – available in summer 2020 in the United Kingdom and European ...
-
Manufactured by ERMA FIRST ESK Engineering Solutions S.A.based in GREECE
Extended service network in strategic points to support large number of installations worldwide. ERMA FIRST has fully trained representatives worldwide and large service stations in key areas like S. Korea and China. Far East is especially covered from ERMA FIRST Shanghai, where Technical Teams with over 60 experienced engineers and technicians are operating in full capacity to attend vessels ...
-
Manufactured by Kutec AGbased in GERMANY
Geoelectrical sounding, mapping, tomography ...
-
Manufactured by isoplus Fernwärmetechnik Ges.m.b.H.based in GERMANY
isoplus pipeline monitoring, damage and leak detection technology: When it comes to monitoring your pipeline for damage and leaks, it is always better to be safe than sorry. Even a tiny leak or small amount of construction moisture can lead to large amounts of damage. This damage can lead to heat loss, pipeline corrosion and operational interruptions. isoplus is proud to offer leak detection and ...
-
Manufactured by Techno-AC LLCbased in RUSSIA
Demonstrations of cable locators inside the office. In order to determine the exact location of one of the three faults. Find break, Short Circuit. https://cablepipelocator.com/finding-cable-failure/ underground cable detector, cable fault location, cable pipe locator, underground pipe detector, cable and pipe locators, water leak detection equipment, cable and pipe locator, fault location ...
-
Manufactured by Perma-Pipe Inc. - a division of MFRI INC.based in USA
From field joint coating installation training to troubleshooting installation challenges, PERMA-PIPE’s team of field service staff are available to ensure a quality installation of our piping and leak detection systems. ...
-
Manufactured by Filtronics, Incorporatedbased in USA
Most dewatering filter presses are sometimes called 'plate-and-frame filters,' but this term accurately describes only a certain style of filter plates in wide use during the mid- to late-1800s. Although true plate-and-frame filters are still employed today, the most commonly used system of plates in modern dewatering operations are more accurately called 'recessed chamber” and/or ...
-
Manufactured by Aerzen International Rental B.V.based in NETHERLANDS
We can deploy equipment with all accessories, such as piping and electrical provisions, 24/7, all year round! We are dedicated specialists in the field of oil-free air and neutral gas conveying. Our team of qualified process engineers are there to support you in an emergency and work together to find the best viable solution to cover your immediate process requirements. Let’s ...
-
Manufactured by F.O.S. Umwelt- und Filtertechnik Deutschland GmbHbased in GERMANY
We are experienced specialists for industrial air filter and dedusting installations and also provide our entire range of expertise in constructing completely new and modern facilities. As your partner for customised and highly productive dedusting installations, we will design a custom-made and efficient solution from A to Z for each of your particular applications. Additionally, we offer a full ...
-
based in ITALY
IDS offers a full range of non-intrusive utility detection and mapping products which exploit the most advanced ground penetrating radar technologies and methodologies. Whether it is for a water company considering a major new investment or an engineering company looking to reduce costs, such technology offers vital information on subsoil conditions providing reliable data to assess safety ...
-
by Envac ABbased in SWEDEN
Taking care of the daily operation and maintenance of your installation includes the following: Defined service levels; Our service levels are tangible, measurable and defined by key performance indicators (KPI). The KPIs are set in partnership with the customer and support both parties' operational ...
-
Manufactured by Pure Technologies - a Xylem brandbased in CANADA
Visual and sounding inspections are a reliable method of detecting pipes in an advanced state of distress. Typically, these inspections are conducted in conjunction with an electromagnetic (EM) ...
-
based in USA
Aquam uses two different processes of pipe tracing to locate your pipes, septic tanks, cleanouts, wells, and valves. Both allow for tracing and marketing the ground with locations and depth of the ...
-
based in CANADA
Our mechanical experience includes installing new and retrofitting existing conveyors, materials handling, heat reclaim, dust control equipment, hydraulic systems and piping work involving potable and process water, air, gas, oxygen, slurry, steam and carbon (coke). ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you