Pipe Testing Services For Monitoring And Testing Available In Bosnia & Herzegovina
-
Premiumbased in USA
We run a cutting-edge, brand agnostic laboratory with specialty testing and metrology. What is calibration? Calibration is the comparison of a measurement device or an instrument against a known standard. The standard in a measurement is considered to be the more correct of the two and one would calibrate the device under test to know how far it deviates from the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The smallest leaks include damage to pipes in which the noise of the medium flowing out cannot be measured with acoustic location methods. This may be the case if there are hairline cracks where the amount of medium flowing out is too low to be measured or if there aren't any measuring points for noise sensors or if the points are too far away. To solve such problems, Sewerin offers a service ...
-
based in USA
From soils, to concrete, to steel. Many different materials can be specifically designed and tested to help ensure that they are best suited for each application. This can help keep costs to a minimum for a quality product, or help to gain green credits for a LEED ...
-
Manufactured by Hatboru Çelik Boru San. ve Tic. Ltd. Şti.based in TURKEY
PVC Pipe Input control tests are performed on the samples taken from the raw materials with the arrival of the required raw materials to the factory before starting the production stage. As Hatboru Plastik Boru,% moisture,% ash amount and density tests are performed on the raw materials that come within the facilities provided by our laboratory. ...
-
Manufactured by Bopp & Reuther Messtechnik GmbHbased in GERMANY
We perform tests and calibrations of flowmeters in a range of 3 l / min up to 1,200 m³ / h (0.79 gal/ min up to 317006.5 gal/h) at our certified test benches which are the ...
-
Manufactured by METRA Energie-Messtechnik GmbHbased in GERMANY
Test / calibration stands: We carry out tests and calibrations of flowmeters in a range from 3 l/min to 1,200 m³/h at our officially approved test stations.Prüf- / ...
-
Manufactured by Hiller GmbHbased in GERMANY
Perfect interaction - all system components from a single source: En route from raw product to finished product, the Hiller decanter is an important key to success, but it is not the only one. The appropriate design of the peripheral components as well as the perfect interaction of all plant and process components are also of critical importance. Hiller GmbH undertakes the entire engineering ...
-
based in UNITED KINGDOM
Ocean Kinetics undertake a range of inspection and testing in-house. Our visual weld inspectors are qualified to a minimum of CSWIP 3.1 and our NDT technicians are certified to CSWIP Level II for MPI &/or ...
-
Manufactured by J.R.Furnace And Ovens Private Limitedbased in INDIA
JRFURNACE offers a substantial advantage to its customers with in-plant pre-testing to ensure proper operation of its equipment. JRFURNACE can fully assemble, wire, pipe and pre-test equipment prior to departure from our plant if physical conditions allow. This helps confirm proper machine operation, quality and minimizes field start-up problems. Larger systems or equipment requiring product ...
-
Manufactured by Aptest NDT Servicesbased in INDIA
UT - Ultrasonic Testing: Ultrasonic nondestructive testing, also known as ultrasonic NDT or simply UT, is a method of characterizing the thickness or internal structure of a test piece through the use of high frequency sound waves. The frequencies, or pitch, used for ultrasonic testing are many times higher than the limit of human hearing, most commonly in the range from 500 KHz to 20 ...
-
Manufactured by Hunan Standard Steel Pipe Co.,Ltdbased in CHINA
First, factory self-check by professinal staff in inspection room. Visual Inspections: Inspect and take measurements of the thickness of the pipes and ensure the numbers conforms to design specifications. Inspect for indentations, pitting, cracks, uneven ...
-
Manufactured by isoplus Fernwärmetechnik Ges.m.b.H.based in GERMANY
isoplus pipeline monitoring, damage and leak detection technology: When it comes to monitoring your pipeline for damage and leaks, it is always better to be safe than sorry. Even a tiny leak or small amount of construction moisture can lead to large amounts of damage. This damage can lead to heat loss, pipeline corrosion and operational interruptions. isoplus is proud to offer leak detection and ...
-
based in UNITED KINGDOM
ERA’s world renowned engineering team has many years experience providing design consultancy and UKAS-accredited testing services for new product ...
-
Manufactured by Eastern Steel Manufacturing Co.,Ltdbased in CHINA
To prevent the damage during transportation, pipe ends are covered with a cap. Spider supports at the end of the pipe are also installed in Large diameter pipe to protect the circularity of ...
-
Manufactured by Zeep Construction Cobased in TURKEY
Zeep Construction has take participate on the big projects and providing the solutions on your projects with high experienced and dynamic expertisers. As a success experienced Zeep construction near of you for your engineering works, structural studies, cost analises of the projects, procurement works, tender sheets and governmental ...
-
Manufactured by Aptest NDT Servicesbased in INDIA
The most sensitive and reliable inspection method for finding discontinuities in small diameter ferromagnetic (Carbon steel) tubes and pipes. Remote Field Testing or commonly called as RFT is an electromagnetic testing method used to detect discontinuities in small diameter ferromagnetic (Carbon steel) tubes and pipes. RFT - Remote Field Testing is essentially a through transmission test method ...
-
Manufactured by FlexPak Inc.based in CANADA
Bubble testing is a widely used method to detect leaks and determine the integrity of a package. This method is commonly used in various industries such as healthcare, food, and pharmaceuticals to ensure that the package contents reach their destination without any damage or contamination. Bubble testing involves submerging a package in water and observing for bubbles, indicating a leak or breach ...
-
Manufactured by Petromet Flange Incbased in INDIA
At Petromet Flange Inc, several inspections and testings are carried out to ensure the quality of the end product. The different types of tests and inspections that we carry out would include the ...
-
based in USA
TRI is very active in the pipe industry as an independent third party provider of quality assurance auditing and testing services.In addition, TRI supports both the PPI and AASHTO National Transportation Product Evaluation Program (NTPEP) testing regimens. TRI provides an ever expanding number of laboratory tests on pipe, pipe liner repair materials, gaskets, and component ...
-
based in USA
Research and education are the very foundation of NCPI. It’s what we do. We’ve led the industry in this area for over ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you