Only show results available in Virginia? Ok

Pipeline Flow Monitoring (Pipeline Monitoring) equipment

  • Premium

    NIVUS - Pipe Measurement Section

    For flow measurement and discharge control. Available with various diameters and lengths. For sensor installation for reliable flow detection in part-filled and full pressurised pipelines.

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • Premium

    NIVUS - Pipe Sensor Accessories

    The mounting accessories allow the quick and easy installation of pipe sensors on various pipes. All components are made of high-quality stainless steel 1.4571. The mounting accessories allow the quick and easy installation of pipe sensors on various pipes. Depending on the requirements the accessories comprise or do not comprise welding works on ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • Data Manager - Model 700F - Flume and Channel / Wier Flow Measurement System

    High Definition Data Logging: The 16 Bit Resolution inherent in Dynotek’s Data Manager improves overall accuracy of measurements by providing substantially better resolution of readings regardless of the underlying accuracy of the sensor input. Analog sensors are essentially continuous in output, with infinite resolution possible. In ...

    By Dynotek Fluid Data Management based in Arvada, COLORADO (USA). from Pipeline Flow Measurement Product line

  • Premium

    Sahara - Pipeline Inspection System

    The Sahara platform is a tethered tool that can accurately identify leaks and air pockets in water and wastewater pipelines. It is capable of locating very small leaks typically within 1.5 feet (0.5 meters) of their actual location. The tool also features inline video that allows operators to observe internal pipe conditions.

    By Pure Technologies based in Calgary, ALBERTA (CANADA). from Sahara Product line

  • Mütec - Model FS 600E - Flow Monitoring for Bulk Materials

    These devices can be used for the early recognition of flow disturbances in the transport of powders, dust, pellets and granules. This can reliably prevent problems caused by blockages, an absence of material or system failures, for instance. The FlowSwitch 600E is used to monitor the flow of solids in pipelines, such as pneumatic conveyor systems ...

    By Mütec Instruments GmbH based in Seevetal-Ramelsloh, GERMANY. from Flow Monitoring Product line

  • Model KFD-Series - Microwave Flow Sensor

    KFD-Series' is a non-contact flow sensor which emits the microwaves of 24GHz from the tip of its sensor. Reflected from the surface of powders and solids traveling in a pipeline, the microwaves get modulated in their frequency on the Doppler effect principle. The sensor, detecting the frequency difference between transmitted and reflected ...

    By WESS GLOBAL, INC. based in Choenan, SOUTH KOREA. from Flow Monitoring Product line

  • JDB Dense Flow - Dense Phase Low Tonnage Conveying System

    JDB Dense Flow Low Tonnage conveying systems are designed to offer the same benefits and system features as our standard Batch Dense Phase systems with low material velocities, minimal moving parts, and pipeline components designed to outlast all others. Low Tonnage Dense Phase conveying systems are an economical conveying solution when low convey ...

    By J.D.B. Dense Flow Inc. based in Palm Harbor, FLORIDA (USA).

  • Krohne Optiflux - Model 2100w - Flowmeter

    The Krohne Optiflux is the first step in flow monitoring. It can be fitted in the pipeline either close to the pump or on the applicator. It has two totalizers which can be reset and shows the flow rate, normally in cubic metres per hour.

    By Tramspread based in Mendlesham, UNITED KINGDOM. from Flow Monitoring/Metering Product line

  • Model EHP–MSU - Moveable Flow Monitoring System

    When using EHP–MSU (Measuring Station Ultra) for flow monitoring in waterworks there is no need to cut the pipeline, close valves or to have a bypass pipe for the flow meter. In this case, both investment and installation costs as well as maintenance costs are reasonable.

  • Flow Itometer

    Having been developed through decades of experience with industrial flow applications, the FLOW-ITOMETER provides visual and quantitative information on pipeline contents live and in real time. A highly versatile tomography package, the FLOW-ITOMETER can be applied in scales from millimetres to metres, making it both a powerful research tool ...

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • SoliTechw2 IL In-Line Sensor for Monitoring Suspended Solids and Sludge Density

    The SoliTechw² IL Sensor provides reliable and repeatable, continuous in-line measurement of sludge density, suspended solids and turbidity. The sensor is installed through a mounting boss onto any pipeline that is larger than 65 mm diameter. The sensing element is positioned flush with the inside wall of the pipe, this ensures that the ...

    By Partech (Electronics) Ltd. based in St Austell, UNITED KINGDOM. from WaterWatch Range - Water Monitoring System Product line

  • Pulsar Isensys - Model SandAlert Range - Sand Monitor

    The SandAlert system consists of two parts: The PulsarGuard 2001 sensor, a small, robust clamp-on acoustic monitor, and the SandAlert controller. SandAlert is ideal wherever you need to keep wells producing efficiently at the highest rate possible; whenever you need a quantitative, real-time and accurate measure of produced solids/sand particles. ...

    By Pulsar Process Measurement Ltd based in Worcestershire, UNITED KINGDOM. from SandAlert Product line

  • FMD 02 - Flow Measuring Devices

    For the operation of a facility with streaming gases (e.g. hall exhaust air, exhaust gases etc.) the continuous registration of the exhaust gas velocity respectively the flow as well as the temperature are often of substantial importance. In case of continuous emission measurements the mass of pollutants has to be disclosed additionally (mass flow ...

    By Dr. Födisch Umweltmesstechnik AG based in Markranstädt, GERMANY.

  • Field Testing and Monitoring

    MAINSCLEAN has a fully equipped and mobile technical team that can be deployed to any location in Australia at reasonable notice. The team and their highly specialized equipment can monitor the performance of water and waste water system. An assessment can then be provided of the condition and performance of pumps, pipelines etc. and comparisons ...

    By Mainsclean based in Moruya, AUSTRALIA.

  • A.YITE - Model GE-104P - Portable Handheld Flow Current Velocity Meter

    This flow current velocity meter is smart, aesthetic appearance, compact design, simple operation, convenient when measuring. It is widely used to measure the flow current velocity in river, irrigation canal, surface runoff, hydrological experiment, and measuring pipeline flow to test the efficiency of the pump station, wastewater monitoring and ...

    By A.YITE Technology based in Shanghai, CHINA.

  • Pipe Lining Monitoring System

    The non-bonded, pipe-within-a-pipe nature of the Tite Liner® system allows continuous monitoring of the completed pipe lining system. Thread-o-lets are welded onto the steel pipe at each end of a lined section of pipeline and a small hole drilled in the center of the thread-o-let through the steel pipe wall only. A riser pipe then ...

    By United Pipeline Systems based in Durango, COLORADO (USA).

  • WPC - Pipe Components with Electrical Wear Monitoring

    Pneumatic conveying pipe systems are subject to various degrees of wear stress from low to very high depending on the medium conveyed, medium velocity and flow rate. Sooner or later this leads to pipe damage and escaping medium.

    By Ilse Schutz LLC based in Rheinberg North Rhine, GERMANY. from Other Product line

  • Vac Assist High Flow Diesel Pumps

    E-Pump offers the highest performing Vac Assist diesel pumps in the rental industry. Our entire fleet of 4”, 6”, 10” and 12” pumps are performance tested and verified prior to every rental. This testing assures that each unit will perform as expected. This testing is at no additional cost to you.

    By E-Pump is a Division of E-Tank, Ltd. based in Massillon, OHIO (USA).

  • Eaton - Automatic Self-Cleaning Strainer

    The Eaton automatic self-cleaning strainer is a motorized unit designed for the continuous removal of entrained solids from liquids in pipeline systems, preventing damage to expensive pipeline system components.

    By PAPSCO, Inc. based in Cleveland, OHIO (USA). from Strainers Product line

  • A.YITE - Model GE-1208 - Open Channel Ultrasonic Flowmeter

    This Open Channel Ultrasonic Flow Measurement Meter Instrument is widely applied by the various sewage discharging enterprises for online flow monitoring on the sewage discharges. The Open Channel Ultrasonic Flow Measurement transducer will not contact with the liquid, so it will be Dirt Resistant and Corrosion Proof.

    By A.YITE Technology based in Shanghai, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you