Only show results available in Connecticut? Ok

PM10 Particulate Monitoring Applications

  • Premium

    Atmospheric heavy metal on-line monitoring solutions

    According to US EPA IO - 3.3 standard method of heavy metals, PMMS – 5000 uses XRF nondestructive testing technology and atmospheric automatic enrichment technology to realize the accurate measurement of atmosphere heavy metals such as lead, mercury, cadmium, chromium, arsenic, etc. It is widely used in environmental air quality monitoring places such as industrial pollution area, residential area, city, etc.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Air Quality Monitoring Stations

    Opsis provides complete AQM stations, used for street-level, urban trend and background applications. The monitoring systems have been approved by the German TÜV and the U.S. EPA among others.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Vacuum technology solutions for municipality industry

    More and more cities see an increase of air pollution caused by fine dust and hazardous PM10 and PM2.5 particulates. Our DISA-CLEAN is a street & area sweeper that efficiently uses high-powered vacuum technology to permanently remove dirt, dust, and PM10 and PM2.5 particulates. DISA-CLEAN is a dust-free alternative to conventional street sweepers but with no water needed to suppress dust.

    By Disab Vacuum Technology based in ESLÖV, SWEDEN.

  • Premium

    Particulate Monitoring

    The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of particulates.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Meteorological sensors for dust monitoring

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Erosion and dust control products for construction industry

    Envirotac line of polymers are commonly used on construction sites to control dust and reduce water. When an area has been mass graded contractors will use Envirotac to treat the disturbed areas as opposed to constantly watering them. One application of an Envirotac will last years and cost nearly one penny per square foot.

  • Premium

    Air monitoring for laboratories

    Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels. Common air monitoring applications include: Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination. Asbestos sampling and analysis

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA).

  • Particle measurement and sampling equipment for Aerosol research

    Dekati has 25 over years of experience in providing high end aerosol research instrumentation and sample conditioning solutions to universities, research institutes, and laboratories all around the world. Dekati® Instruments and sample conditioning systems have a long, exquisite track record of scientific publications and our in-house R&D continuously develops new are more accurate ways to characterize different aspects of aerosols. Particle size and concentration studies. Particle shape and density...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Particulates PM10 PM2.5 TSP monitoring

    Sampling dust and particulate matter is important as dust and particulate matter can affect the health of human populations, as well as the natural environment. Dust and particulate matter can cause respiratory problems when breathed in by humans. Dust and particulates above 10 micrometer (PM10) are filtered and generally do not enter the lungs.

    By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA.

  • Particle measurement and sampling equipment for Stationary source emissions

    Dekati has over 25 years of experience in providing measurement solutions for emission measurements. Today, our selection of measurement solutions for stationary source emission measurements include both real-time and gravimetric detection of concentration and particle size distribution. Our extensive line of sample conditioning devices enable not only environmental emission measurements but also measurements directly from the combustion zone and before heat exchangers and used flue gas cleaning devices. Dekati...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Trombia Sweeper for Milling Sites

    Waterless Trombia sweeping brings superior efficiency to milling sites.

    By Trombia Global based in Kuopio, FINLAND.

  • Trombia Sweeper for Silica Dust Removal

    Trombia solves your silica dust challenge and makes you meet the worksite dust regulations.

    By Trombia Global based in Kuopio, FINLAND.

  • Trombia Sweeper for Ports and Harbors

    Trombia for port area, warehouse & container yards sweeping as well as for vessel dust management. Trombia solves your dust and debris challenge in all areas of a seaport

    By Trombia Global based in Kuopio, FINLAND.

  • Aerosol and particle technology for environment industries

    Fine dust is generated by industrial exhaust gases but in particular due to traffic. Environmental pollution is therefore caused particularly by exhaust gases of diesel-engined vehicles (diesel soot) but on the other hand also by abrasion of street, tyres and brakes and its resuspensions.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Environmental Solution for Mitigating Dust Particle Dispersion in Air

    By installing Dustroid around mines, quarries and construction sites, monitoring of suspended particulate matter, i.e. PM1, PM2.5, PM10, PM100 is done in real-time. The data helps in optimizing the dust-suppression process in case of excessive emissions from the sources. This data is used to generate alerts and alarms based on the custom threshold set by regulators. Using such triggers, a pre-existing dust suppression system like Mist cannons, Sprinklers, Mechanical barriers, Dust collectors, Dust Filters, etc....

    By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.

  • Environmental monitoring solution for mineral processing

    Measurement of particulates, SO2, NOX, CO, hydrocarbons and greenhouse gas emissions from the mineral process industries requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA.

  • Air quality monitoring solutions for smart cities sector

    Many urban areas are using a range of Internet of Things (IoT) devices to collect data that can be used to help manage resources efficiently. These ‘smart cities’ are often incorporating environmental sensor technology into their networks to better understand air pollution and its impact on the people living and working in the city. Cities and towns typically have one or two traditional monitoring stations, meaning many neighbourhoods do not have access to regular, localised air quality information...

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Gas analysis & monitoring systems for dust

    Particulate matter, suspended particulate matter, atmospheric dust, particulate matter, total suspended particulate (TSP), are terms that commonly identify the group of substances suspended in the air (fibers, carbon particles, metals, silica, polluting liquid or solid). Particulate matter is the pollutant that is now considered the greatest impact in urban areas, and is composed of all those solid and liquid particles dispersed in the atmosphere, with a diameter ranging from a few nanometers to 500 microns and...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Air sampling for emergencies

    Deployable battery operated monitoring systems for measurement of dusts (PM10, PM2.5), gases and vapours. Generally used for measurements of site boundaries or chemical incidents

    By Casella based in Kempston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you