PM10 Particulate Monitoring Equipment For Monitoring And Testing
-
PremiumManufactured by Ecomesurebased in FRANCE
Studies conducted in the U.S.A show that environmental quality is one of the prime concerns of building occupants, be they tenants or employees. This is especially true with younger generations. Noise, temperature, brightness, and air quality are essential criteria people consider when assessing the comfort of a building's indoor environment and choosing a workplace. More and more building ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10 inlet for ambient air measurements. EN 12341 PM10 inlet downscaled to 10 ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by Environmental Products & Applications, Inc.based in USA
Earth Glue is an environmentally friendly acrylic polymer. It is added to water and when applied it will penetrate the soils and bond them together creating a tough layer of protection. Earth Glue is a recycled product from the polymer industry that has been reworked to serve the dust control and soil stabilization sectors. It will outperform salt based and lignin products traditionally used for ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The WiFi Indoor Air Quality Monitor lets you simply and easily monitor and control indoor air quality. Use it to visually monitor air quality with its easy-to-read light ring which indicates the measuring range of CO2 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10/PM2.5 inlets for ambient air measurements. EN 12341 PM10 inlet downscaled to 30 lpm. PM2.5 inlet, 30 ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5 series is a simple modularization system and auxiliary system of air quality continuous monitoring based on compact outdoor temperature control system. The temperature control is designed for the entire monitoring system. It can be configured with a variety of monitoring factors which is in accordance with Chinese and USA EPA standard measurement principle including 03, 802, NOx, CO and voe, ...
-
PremiumManufactured by Metrohm Middle East (FZC)based in UNITED ARAB EMIRATES
The MARS is a sample preparation device that transfers aerosol particles from an air stream to the aqueous phase. Subsequently, the water-soluble ionic fraction (anions and cations) can be analyzed by different analysis techniques according to your ...
-
PremiumManufactured by Metrohm Middle East (FZC)based in UNITED ARAB EMIRATES
The 2060 Monitor for AeRosols and Gases in ambient Air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
To remove humidity from the sample. 120 cm, 120 + 60 ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s Xact® 625i is designed for high time resolution multi-metals monitoring of ambient air, with detection limits that rival those of laboratory analysis. The Xact® 625i comes standard with a solid-state meteorological sensor and SCI’s proprietary ADAPT analysis package, making the instrument one of the most powerful air pollution source detection offerings in the ...
-
PremiumManufactured by Environmental Products & Applications, Inc.based in USA
With over 27 years in the industry, our certified experts know exactly how to eliminate dust on your site. Over the years, we have developed dust control polymers that work effectively & deliver clients maximum value on their investment. Envirotac dust control polymers reduce fugitive dust emission effectively and are ideal for road construction, airfields, helipads in remote sites & ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 Micro Air Monitoring System is a small online environmental monitoring system based on high precision(ppb level) gas sensor. It provides flexiable sensor combination scheme and modular design, as well as online monitoring of PM10,PM2.5,SO2,NO2,O3,CO,VOCs,temperature, humidity and other factors in the atmosphere. Special factors can also be qulckly configured according to the actual ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The High Volume PM 2.5 ambient air sampling inlet & retrofit kits are designed to provide existing owners of HI-Q Series High Volume PM-10 sampling systems with the option of retrofitting them into High Volume PM-2.5 Samplers, instead of needing to procure a new, complete, PM-2.5 high volume air sampler. An adapter is placed into the standard PM-10 sample inlet in place of the existing PM-10 ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This unit is built around a two stage centrifugal fan type brushed blower. The tangential discharge exhaust allows a higher maximum flow rate than other similar types of units. To reduce motor winding burn out, the HVP-2000 has a separate motor cooling fan. Brush-life will range between 600 to 1,000 hours depending on sampling mo- tor speed. Motor brushes can be changed in the field within 15 to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you