PM2.5 Particulate Monitoring Equipment For Monitoring And Testing Available In Guatemala
-
Showcasebased in USA
Clarity’s flagship particulate matter (PM) and nitrogen dioxide (NO2) monitor is self-powered, FCC/CE certified, UV-resistant, and weatherproof. A truly self-sufficient IoT air quality monitoring system with solar harvesting, internal battery, and global cellular communications, the Clarity Node-S accommodates site-specific requirements according to the customer’s needs, not the other ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Studies conducted in the U.S.A show that environmental quality is one of the prime concerns of building occupants, be they tenants or employees. This is especially true with younger generations. Noise, temperature, brightness, and air quality are essential criteria people consider when assessing the comfort of a building's indoor environment and choosing a workplace. More and more building ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
The sampler that started it all. This lightweight, nearly silent, 240 gram sampler collects airborne particulate matter on a 37 mm filter with continuously monitored volumetric flow. Each sampling run is accompanied by a log file that reports hardware performance and environmental information. With millions of hours sampled on these devices they have become the favorite of exposure scientists, ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm in acc. with EN ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10/PM2.5 inlets for ambient air measurements. EN 12341 PM10 inlet downscaled to 30 lpm. PM2.5 inlet, 30 ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-510 is a Multi-Gas Meter designed to measure multiple gas concentrations in a wide range of industries and applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PTFE-coated glass fiber filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded and handled without loss of fibers. Specifically recommended for Method 26, PM10, and PM2.5 sampling. Great for especially low loading rates and low absorption of acid gases such as SOx or NOx with at least 99.95% retention efficiency (0.3 μm DOP). ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm ac. to EN ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The WiFi Indoor Air Quality Monitor lets you simply and easily monitor and control indoor air quality. Use it to visually monitor air quality with its easy-to-read light ring which indicates the measuring range of CO2 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you