Pollutant Sampling Equipment For Monitoring And Testing Available In Indiana
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-EDL-14M cart mounted mobile low volume air sampler with digital flow meter has an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm to 213 cm above floor level. Model DF-EDL-14M contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, and an RS232 ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-EDL-14ME cart mounted mobile low volume air sampler with digital flow meter has an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm to 213 cm above floor level. Model DF-EDL-14ME contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, and an RS232 ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic temperature sensors rely on thermal quenching of photoluminescence and are optimized for the innovative REDFLASH technology from PyroScience. The optical temperature sensors are characterized by extreme photo-stability, small size of the sensor tip (minisensors), ultra-fast response times (less than 0.1 s in water), and do not show interferences with gases (such as oxygen) and ...
-
Manufactured by Mechatest Sampling Solutionsbased in NETHERLANDS
Mechatest designed the most innovative Liquid Bottle Sampler solution on the market, based on standard GL32, GL45, 28 and 36 mm bottles with cap and septa, modular and with a dozen of interchangeable options. No waste, No pollution, ZERO emissions. This typical “needle” bottle sampler for liquids is closed loop and suitable for emission free sampling of toxic, dangerous or volatile ...
-
Manufactured by Qingdao Allway Tech Co.,Ltdbased in CHINA
The filter cartridge is a surface filter element, which uses the tiny air-permeable tissue formed on the surface of the filter material to block the particulate matter in the ...
-
Manufactured by -4H- JENA Engineering GmbHbased in GERMANY
The -4H-Passive Sampler is a flow-through tube array, which can be equipped with different receiving membranes (e.g. diffusive gradients in thin films (DGT), low-density polyethylene or silicone rubber ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This fiber-optic minisensor consist of an optical fiber with a sensor tip diameter of 430 µm. Compared to a microsensor, this ...
-
Manufactured by Dongguan Huanyi Instruments Technology Co.,Ltd.based in CHINA
This 3m³ air purifier performance CCM test chamber is mainly used for the limited space device of the purifier's ability to remove target pollutants in the air. It can be CCM test equipment for the cumulative purification capacity of specific ...
-
Manufactured by Bete, Gas Scrubber Division of Trevi nvbased in BELGIUM
In case of odor nuisance, social concerns are often very important. When no odor control measures are taken, the dislike of an industrial plants neighborhoud can lead to negative publicity in the media. In some cases, governemental involvement might lead to environmental ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
Mercury in Ambient Air is now routinely measured in both urban and rural sites due to the toxicity and mobility of this element. In addition workplace air monitoring for mercury and cell room monitoring are essential to protect the health of the workers in the relevant industries. Mercury Analysers for these applications can be Online Mercury Monitoring Stations which are designed for fixed long ...
-
based in USA
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
-
based in USA
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
-
Manufactured by CleanWay Environmental Partnersbased in USA
Curb inlet filters remove debris and pollutants from stormwater runoff to keep drainage waterways clear and prevent contamination. This storm filter system provides an effective method for street-side inlet protection. ...
-
Manufactured by Dongguan Huanyi Instruments Technology Co., Ltd.based in CHINA
Application range: VOC Emission Chamber can provide standard testing environment (such as appointed temperature, relative humidity, air exchange rate and airflow rate) or s mulate real indoor environment, and test the pollutant release rate and release prope ties of various indoor materials and products. Then it can: A.Confirm the influence of environment variables on the release rate and release ...
-
Manufactured by Cryptonbased in UNITED KINGDOM
Crypton's Market Leading Combined Smoke and Gas Emissions Analyser (CCP800 series) is DVSA approved as Connected Equipment for testing petrol and diesel ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
Our Teflon gas sampling bags are made of Fluropolymer (FEP) film and are highly inert for storage of gas samples. FEP film is the most chemically resistant film in the fluoropolymer family with low adsorption. The thickness of the FEP Teflon film is about 0,07 mm. These Teflon bags are very suitable for sampling at extreme temperatures ranging from ca. -205 degrees Celsius to +205 degrees Ceclius ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This fiber-optic minisensor consist of an optical fiber with a sensor tip diameter of 430 µm. Compared to a microsensor, this ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you