Predictive Emissions Monitoring (PEMS) Equipment For Monitoring And Testing Available In Oregon
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Hydroxychrom is a gas generator providing high purity (grade: 99.9995%) of hydrogen used as carrier gas or fuel gas for autoGC FID (for VOCs) and FPD (for sulfur compounds). Generator of high purity hydrogen used a carrier gas for airmoVOC and chromaFID analysers as well as for the FID flame. Hydroxychrom is a high purity hydrogen generator and an important tool for the incoming H2 of FID, FPD ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG 5U PRO is able to generate 3300 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 5U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 5U PRO ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled water (ZEROWATER). This process ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the Fidstation RC product line of High Purity Hydrogen & Zero Air generators with compressor to supply all gases necessary to aliment the FID detector, close to the consumer, in an elegant 19” casing with full color display and touchpad. The FID Station is composed of a High purity Hydrogen generator and an Ultra Zero Air generator with on board Air compressor. Based on ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HG MINI is able to generate up to 300 cc/min of Hydrogen with purity better than 99.999% and pressure up to 12 bar (174 psi). The HG MINI includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are involved. The innovative static drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to its unique humidity safe guard. The ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HG KUBE is able to generate up to 260 cc/min of Hydrogen with purity better than 99.9996% and pressure up to 9 bar (130 psi). The HG KUBE includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A long-wavelength thermal imager providing a full temperature measurement range of -20 to 1000 °C (-4 to 1832 °F) in three ranges with a choice of different optics and ...
-
Manufactured by Zeeco, Inc.based in USA
The picture (right) shows Zeeco’s GLSF Free-Jet round flame burners in operation. The design uses the Free-Jet method of mixing the fuel gas ejected from the gas tips with the surrounding inert products of combustion which dramatically lowers thermal NOx production. In addition to great NOx reduction performance, the design offers a great turndown of typically 10:1 or greater and each tip ...
-
based in USA
The SmartCEMS® Server package is a set of software tools and a platform to gather PEMS data from various sources such as CMC’s SmartCEMS PEMS Analyzer, Continuous Parametric Monitor, Alternative Emission Monitor, and Compliance Assurance Monitor and from remote connected hardware devices such as CMC’s Remote Terminal Unit. The system gathers all compliance emission data and allows ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
PPS-M is your optimal tool for industrial fine particle monitoring in various environments: Engine and aftertreatment development. Testing labs and portable emission monitoring devices. Stack emission monitoring. Outdoor and indoor air quality ...
-
based in AUSTRALIA
Stay ahead of odour emissions. Proactive odour management solutions for industrial operations, sewer networks and ...
-
Manufactured by EnviroFALK Pharma Water Systems GmbHbased in GERMANY
Our ozone generators are compact and versatile and can be scaled in a range from 0.8 g O3/h to 10.0 g O3/h: ...
-
Manufactured by Monitoring Solutionsbased in USA
CEMDAS Evolution offers the most powerful and easy-to-use Data Acquisition System (CEMS DAS) on the market today. Its advanced design is programmed in Visual Basic.net, utilizes a powerful SQL database and runs in the latest Windows operating system. CEMDAS can also be added to any Continuous Emissions Monitoring System (CEMS). ...
-
Manufactured by Quadrex Corporationbased in USA
As helium prices increase, many labs are switching over to hydrogen for their GC carrier gas. An ALLIANCE HYDROGEN GAS GENERATOR will supply high purity hydrogen for column carrier gas and FID fuel from one convenient ...
-
Manufactured by Nel ASAbased in NORWAY
The C Series generators utilize PEM technology to produce ultra high purity hydrogen consistently on-site. With efficiency in mind, they sense demand and adjust production accordingly. Replacing the need for tube trailers or liquid supply, the generators are space-saving solutions that maintain quiet and steady ...
-
based in USA
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
-
based in USA
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
-
based in USA
The SmartCEMS-75 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 75, Subpart E for combustion turbines and gas/oil fired boilers, or heaters. The data acquisition and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you