Pressure And Temperature Monitoring Equipment For Monitoring And Testing Available In Yemen
-
ShowcaseManufactured by Questron Technologies Corporationbased in CANADA
Ideal for digestion, extraction, evaporation, and synthesis. Built-in temperature and pressure monitoring of each digestion vessel. Controlled release & resealing of over pressure. Simple Vessel handling station.Compatible with LVHT and eVHP type vessels. Remote wireless controller. Two-speed, 150 CFM exhaust for fume removal and vessel ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI Aerospace's pressure transmitters combine to meet the demand for full qualification compliance with the performance and measurement capability necessary to meet a variety of applications on the aircraft. FCI pressure sensors are constructed using either thin film sputtered deposition strain-gage or variable capacitive ceramic sensing technologies. Strain-gage elements are directly welded to ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / 4 dilution ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Chromatotec has engineered and manufactured the new Medor Exd designed to operate in hazardous area environment zone 1 without any purging ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Analyser for continuous on-line monitoring of Hydrogen ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 100 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for ambient air monitoring applications, waste anesthetic monitoring, anesthetic leak detection, and hospital workplace exposure ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points by ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
Long a world leader in optical meteorological sensors OSI now provides automated weather stations (AWS) built around the OWI-431 DSP WIVIS and OWI-651 Low Power WIVIS. Select the OWI-431 based system for permanent AC powered stations. Select the OWI-651 for battery powered or solar applications. In either case, you get an advanced Weather Identifier and Visibility Sensor (WIVIS) with other ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Online analysis & control of gas ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
CEC201 series dual-channel gas condenser is a kind of compressed high efficiency moisture removing, used in gas pretreatment system of gas analysis system. It can protect moisture and corresponding corrosion to the gas analyser and guarantee the lifespan lifespan of gas ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Sulfurs / Mercaptans / odor analyzer: MEDOR Exp Chromatotec has engineered and manufactured the new Exp Medor designed to operate in hazardous area environment such as Class I, Division 2, group C&D and ATEX zone I and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
CTD-Diver for measuring and recording groundwater level/ temperature/conductivity. Memory for 48000 measurements. Conductivity 0-120 mS/cm, compensated temperature 0 till +50 °C. Measuring range 50 m. Accuracy EC 1% of the measured value. Housing ZrO2. Warranty 1 ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Measure pressure based Waves with the Aanderaa Wave Sensors- compact fully integrated sensors for measuring wave and tide conditions. The 5218 wave sensor is designed to be mounted on the Aanderaa SeaGuard top-end plate or connected to SmartGuard using AiCaP CANbus or in other measurement systems using the RS-232 interface. The 5218R wave sensor sensor is designed for use with long cables by ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
With the Reverse Head Extensometer, deformations can be continuously observed during excavation in front of the tunnel face or during the removal of slopes or the excavation of excavation pits. The modular design based on a chain of single extensometers provides a large number of measuring points in small diameter boreholes. The big advantage compared to other extrusion measuring systems is the ...
-
PremiumManufactured by Shanghai Metash Instruments Co.,Ltd.based in CHINA
Special Designed Sample Digestion Vessel : The automatic vent and self-resealing structure which won national patent ensures the digestion vessels can automatically release pressure and instantly reseal when a sudden over-pressure situation occurs. It prevents waste of batch samples and solutions and also avoids vessel ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you