Pressure Monitoring Equipment For Monitoring And Testing Available In Cape Verde
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For safe refilling of SF6 gas into gas compartments by overpressure The handy device allows filling of electrical equipment with SF6 gas directly from the cylinder by overpressure. The primary gauge of the pressure reducer displays the cylinder pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The cylinder pressure ...
-
ShowcaseManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being officially ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system for process and zero gas used in the gas analysis industry. Compressor (Thomas pump type 607CD22) requires no oil. Immediate functional, maintenance-free ...
-
ShowcaseManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Siloxane monitor is designed to output a total siloxane concentration in mg/m3 in gases derived from waste water treatment, food waste digestion and landfills. Understanding the levels of Siloxane in the gas allows operators to manage gas clean up systems such as activated carbon filters and regenerative filter systems. The monitor provides assurance to those exporting gas to grid that ...
-
ShowcaseManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
ShowcaseManufactured by Respirometer Systems and Applications, LLC (RSA)based in USA
When operating in the aerobic mode, oxygen – from a supply of pure oxygen – is added in small increments into each respirometer vessel in response to oxygen uptake and carbon dioxide absorption. This mode of operation maintains a constant oxygen concentration in the headspace within the reaction vessel. Oxygen transfer from the headspace to the liquid phase is accomplished by using ...
-
ShowcaseManufactured by Infitek Co., Ltd.based in CHINA
MDS-TanP comes standard with 40 high-pressure digestion vessels, achieving fully enclosed high-pressure digestion. It can also meet the digestion needs for tough samples. Having the fixed quantity pressure-relief design and automatic over-pressure-relief protection to prevent vessel burst due to high pressure, MDS-TanP is the perfect combination of high-throughput digestion and high-pressure ...
-
ShowcaseManufactured by BD|SENSORS GmbHbased in GERMANY
The process pressure transmitter XMP i has been especially designed for the process industry and measures vacuum, gauge and absolute pressure ranges of gases, steam, fluids and dust up to 600 bar. Different process connections such as threads and flanges with an internal or flush welded diaphragm are available and can be combined with a cooling element for media temperatures up to 300°C. ...
-
ShowcaseManufactured by BBA Pumps BVbased in NETHERLANDS
The electric BA180KS is an 8-inch sewage pump and equipped with a priming system. With the unique screw channel impeller, it allows you to pump wastewater with large solids and long fibrous materials. You can choose from a stackable frame or a sound attenuated canopy. We can install a soft starter or a variable frequency drive in the lockable compartment. The control panel features automatic ...
-
ShowcaseManufactured by Fiberscope.net by Medit Inc.based in CANADA
Welcome to the steerable, zero-emissions, portable, battery-powered TROGLOTREK Sewer Crawler. This robot is one of the smallest options on the market, able to inspect straight 4" (100mm) pipes, and light enough for a single operator to pick it up, transfer it to a jobsite, run the inspection on battery power with no additional cables, generators, and carry it back. This crawler can be efficiently ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Excalibur Water Systems’ Simplex Cooling Tower Side Stream Filters are designed for applications with a steady demand capacity of filtered water during a specific period. Regeneration, during which time no filtered water supply to the cooling tower is available, is then programmed to occur at a pre-set time. For this reason, Simplex Cooling Tower Sidestream Filters are typically sized to ...
-
PremiumManufactured by ForeverPure Corporationbased in USA
The construction of the membrane is a Thin Film Composite (TFC). It is the highest quality membrane available in the industry. The reverse osmosis pressure vessel is a heavy-duty housing made of corrosion resistant ...
-
PremiumManufactured by CETCObased in USA
CLAY CUTTER PRO is a dry version of the CLAY CUTTER liquid additive. This concentrated, non-hazardous, proprietary clay inhibitor can be used with either polymer or bentonite drilling fluid systems. This dry additive is cost effective and dosages are easily monitored and controlled. CLAY CUTTER PRO is an ideal additive for HDD bores in reactive clay ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Highly economical rotary lobe compressor package with belt drive. Extended pressure range. Oil-free as per class 0. Discharge silencer without absorption material, low noise levels. Reduced maintenance costs and lower energy consumption for sustainably low ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-804-30 high volume enzyme dust air sampling systems are designed for remote unattended continuous air sampling applications. The DF-804DT-30 Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-804-30 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-60810-MHVE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-60810-MHVE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 811 M is the next generation in two-channel emissions monitoring instrumentation. Unique in speed and reliability, the nCLD 811 M is modular designed and allows the continuous and simultaneous analysis of NO, NO2 and NOx in raw exhaust gasses with NOx concentrations ranging from several thousand ppm down to a ppb. Its graphical user interface “GUI“ also individually displays ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 4 membranes 4x40. 7.5 HP stainless steel RO pump. Weight: 460 lbs. (210kg). Size: 36x19x71 inch. (91x48x180 cm). 3/4” feed connection. 1/2” product connection. 3/4” reject connection. ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
Daimer is the world's number one brand of commercial and industrial carpet cleaning machines and steam ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / 4 dilution ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you