Pressure Sensors Equipment For Monitoring And Testing Near Marshall Islands
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The BioCap® is designed to store the waste bio gas produced in the digesters. The cover is also designed to impart a pressure to the bio gas to enable reticulation of the bio gas to the appliances which will utilise the bio ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The BaroVUE™10 is a highly accurate barometer that can measure pressures over a range of 500 to 1100 hPa and can be used in a range of applications that includes meteorology and hydrology. This sensor includes our zero downtime recalibration. Other sensors on the market need to be taken offline and sent back to the manufacturer to be recalibrated, often for weeks at a time, causing a loss ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CPEC306 with EasyFlux® is a turn-key, closed-path eddy-covariance (EC) flux system for long-term monitoring of atmospheric-biosphere exchanges of carbon dioxide, water vapor, heat, and momentum. A complete system consists of a closed-path gas analyzer (EC155 closed-path gas analyzer), sonic anemometer (CSAT3A sonic anemometer), data logger (CR6 datalogger), sample pump, and accommodations ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AP200 is a complete, integrated CO2 and H2O atmospheric profile system. It measures carbon dioxide (CO2) and water vapor (H2O) concentration from up to eight intakes, which are normally spaced along the height of a tower to give a vertical profile. The AP200 is often used in conjunction with an eddy-covariance system to measure the storage term and provide you with a more complete measure of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS100 measures barometric pressure for the range of 600 to 1100 hPa (mBar). This range equates to from below sea level (as in a mine) up to 12,000 feet above sea level. Designed for use in environmental applications, the CS100 is compatible with all Campbell Scientific data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CPEC310 with EasyFlux® is a turn-key, closed-path eddy-covariance (EC) flux system for long-term monitoring of atmospheric-biosphere exchanges of carbon dioxide, water vapor, heat, and momentum. A complete system consists of a closed-path gas analyzer (EC155 closed-path gas analyzer), sonic anemometer (CSAT3A sonic anemometer), data logger (CR6 datalogger), sample pump, three-valve module ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The LevelVUE™B10 is a cost-effective, accurate, reliable solution for water-level measurements based on a non-submersible pressure transducer system. This type of sensor is a bubbler. Bubblers accurately measure the pressure it takes to create a continuous airflow in an airline submerged in water. The LevelVUE™B10 is designed for ease of use while providing long-term performance and ...
-
Manufactured by Davey Water Products Pty Ltd.based in AUSTRALIA
Davey Torrium premium pump controllers for perfect, even pressure. ...
-
Manufactured by Pacific Data Systems Pty Ltdbased in AUSTRALIA
The SatVUE Automatic Weather Station is a simple to use, simple to install, robust monitoring system designed to provide you with frequent, accurate updates on your local weather ...
-
Manufactured by Pacific Data Systems Pty Ltdbased in AUSTRALIA
The Pacific Data Systems’ SPOKEdata Weather Station is a simple to use, simple to install, robust monitoring system designed to provide you with frequent, accurate updates on your local weather ...
-
Manufactured by DEWESoftbased in SLOVENIA
An easy-to-use ADAS validation system with the latest GPS and IMU technologies with 2 cm accuracy. Advanced driver assistance systems are automated systems, which increase safety and improve the driving ...
-
Manufactured by DEWESoftbased in SLOVENIA
High accuracy 100Hz GPS receivers and Inertial Measurement Units (IMU) with Real-time Kinematics (RTK) support for the most precise position based test and measurement applications. ...
-
Manufactured by DEWESoftbased in SLOVENIA
Brake test system from Dewesoft is very flexible and covers all kind of brake tests, braking comfort and testing vehicles with regenerative braking. High-accuracy GPS/IMU hardware is available to achieve the highest possible velocity and distance accuracy. ...
-
Manufactured by SeaMetrics, Inc.based in USA
Designed to resist the elements, the PT12 delivers accurate pressure and temperature readings in rugged environments. This industry standard SDI-12 device is easy to interface with SDI-12 recorders and can be daisy-chained on one cable up to 200 feet, making it a preferred choice for many environmental professionals with existing SDI-12 ...
-
Manufactured by Baumer Ltd.based in USA
Fully welded pressure sensor with hygienic connection. 3-A sanitary standards, FDA-compliant, EHEDG-certified. Resistant to all common CIP cleaning media. Threadless mounting using a clamping connection. Optionally available with IO-Link. Tank linearization and volume calculation. Absolute pressure, relative pressure and vacuum measurement. ...
-
Manufactured by Baumer Ltd.based in USA
Fully welded pressure transmitter with flush membrane. Cavity-free process connection. Resistant to all conventional CIP cleaning media. Compact installation from G 1/2 A. Absolute pressure, relative pressure and vacuum measurement. ...
-
Manufactured by SeaMetrics, Inc.based in USA
NW’s AquiStar® PT2X is ideal for observing flow patterns, testing pumps, and monitoring groundwater, well, tank and tidal levels. A pressure and temperature sensor with integrated datalogging, this sensor is constructed with 316 stainless steel, fluoropolymer, PTFE—providing highly accurate readings in rugged and corrosive field ...
-
Manufactured by Baumer Ltd.based in USA
Fully welded pressure sensor with hygienic connection and touch screen. 3-A sanitary standards, FDA-compliant. Resistant to all common CIP cleaning media. SIP-capable (150 °C max, < 30 min). Versions available for high media temperatures (200 °C). Threadless mounting using a clamping connection. Optionally available with switching output. Tank linearization and volume calculation. ...
-
Manufactured by Muntersbased in USA
This controller supports up to six temperature sensors, two humidity sensors, two bird scales, one CO2 sensor, various types of heaters, a static pressure sensor, and more. The AC-2000 Pigs can be ordered with 12 or 20 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you