Process Analysis Equipment For Monitoring And Testing Near Afghanistan
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Real-time process control for continuous NIR-measurements. Quickly and closely monitor key parameters, such as moisture, fat or protein for real-time process control. The NIR-Online Process Analyzer continuously provides accurate measurements within seconds to guarantee you maximal production ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The NIRFlex N-500 is the modular FT-NIR spectrometer that you need for reliable results for QC, R&D in applied science and various industries. The NIRFlex N-500 offers a wide range of measuring cells and accessories for flexible performance. ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Mixer B-400 provides maximal homogenization efficiency at minimal effort. The user-friendly tool is essential for optimized sample preparation in your analysis process ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Closely monitoring key parameters such as moisture, fat or protein is crucial to correct deviations occurring in any manufacturing process. BUCHI NIR-Online analyzers continuously provide accurate measurements within seconds to guarantee maximum production ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
Volume flow rate, pressure dew point, pressure, current efficiency, temperature and residual oil vapour content monitoring with just one measuring device. The METPOINT BDL und BDL compact is an innovative electronic screen writer for recording critical process parameters for e.g. compressed air and gas applications. The electronic recording system measures connected input signals and subsequently ...
-
Manufactured by AMETEK MOCONbased in USA
The BevAlert 9100 Gas Chromatograph (GC) from AMETEK MOCON is a specialized instrument utilized by specialty gas manufacturers and the food and beverage industry to monitor trace volatile organic compounds (VOCs) or total sulfur (TS) in CO2 used for carbonated beverages (water, carbonated drinks, beer, etc.), as well as quick frozen foods. The BevAlert 9100 meets, exceeds, and complies with ...
-
Manufactured by AMETEK MOCONbased in USA
The PetroAlert® 9200 gas analyzer combines the selective detection of a gas chromatograph (GC) with the continuous monitoring abilities of a total hydrocarbon analyzer (THA) in a single, compact, sensitive and stable instrument. The PetroAlert 9200 Gas Chromatograph is a petroleum hydrocarbon analyzer suitable for the oil & gas ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9100 on-line gas chromatograph blends state-of-the-art technology with the reliability and flexibility of gas chromatography. Building on decades of experience, this instrument has been designed with key features to meet your application requirements. The GC is specifically designed for sub-part-per billion (sub-ppb) to percent level detection, dependent upon the application, to ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline® 9200 gas analyzer combines the selective detection of a gas chromatograph (GC) with another simultaneous GC application or with the continuous monitoring abilities of a total hydrocarbon analyzer (THA) in a single, compact, sensitive and stable instrument. Building on decades of experience, this instrument has been designed with key features to meet your application ...
-
Manufactured by AMETEK MOCONbased in USA
The PetroAlert 9100 incorporates the sensitivity, stability, linearity and selectivity of a flame ionization detector (FID), making it the ideal choice for the analysis of aliphatic hydrocarbons. The instrument is designed specifically for the oil and gas industry’s surface logging process. Fast C1 to C5 analysis is completed in 30 seconds, preserving the C1-C2 separation at >200:1 ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 TCA Total Carbon Analyzer is a microprocessor-based instrument designed to measure total hydrocarbon content as well as provide a combined carbon monoxide (CO) and carbon dioxide (CO2) reading for impurity detection at industrial and specialty gas companies. Detection limits down to < 0.1 ppm. User-programmable ranges from 1 ppm to 100 ppm are factory-configured per the ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline® 9000 H Heated Hydrocarbon Analyzer is a microprocessor based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The heated total hydrocarbon analyzer is configured for single point analysis (with or without a sample pump) of samples heated up to 376 °F (191 °C) for pre-filtered (10 microns) non-condensing ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 Hydrocarbon Analyzer is a microprocessor-based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The analyzer can be purchased in a variety of configurations with internal components for single or multi-point sampling (with or without a sample pump) for pre-filtered non-condensing ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 MNME uses a flame ionization detector (FID) in conjunction with an oxidation catalyst switched in and out of the sample stream. The catalyst oxidizes all hydrocarbons except methane to produce a methane only measurement. This catalytic reaction relies on the presence of oxygen (O2) in the sample. The methane value is then subtracted from the total hydrocarbon concentration to ...
-
PremiumManufactured by Galaxy Scientific Incbased in USA
The QuasIR 2000 Portable Fiber Optic FT-NIR Spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It delivers a wide range of technical ...
-
PremiumManufactured by Galaxy Scientific Incbased in USA
Galaxy Scientific’s QuasIR 2000E process FT-NIR analyzer is designed for continuous measurement of the chemical composition of material transported on a conveyor belt, through a pipe, or in a chute. Our unique external projection optics use high powered tungsten lamps to illuminate the sample from as far as 30 inches away and collect the scattered reflection off the sample through a fiber ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and we’ve done the calculations for you; cleanroom ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you