Process Analysis Equipment For Monitoring And Testing Near Australasia
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Spectroquant® Prove 600 offers high-resolution optics with cuvettes of up to 100 mm, the compact device is perfect for complex kinetics or spectral measurements. Preprogrammed for the most sensitive silicate and chloride tests, you can detect the lowest analyte concentrations and avoid damages to cooling and boiler water systems. The huge advantage of this test kit is that it can be stored at ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Prove 300: Robust UV/VIS Spectrophotometer for Sensitive Measurements - Accurate documentation is essential in the drinking water and beverage industry. Prove 300 makes it safer and simpler than ever before! Spectroquant® Prove 300 is an incredibly robust UV/VIS spectrophotometer, optimized for sensitive measurements such as the analysis of drinking water and beverages. Programmed for over ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Prove 100: Smart VIS Spectrophotometer for Routine Applications - Cell Test Port Spectroquant® Prove 100 is a highly capable yet economical VIS spectrophotometer developed for fast, easy and secure use in routine applications such as waste water testing. It allows direct insertion of cell tests and is preprogrammed for our broad range of Spectroquant® cell test kits. Just add the waste ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Prove 600: Powerful UV/VIS Spectrophotometer for Complex Analyses Spectroquant® Prove 600 is a powerful UV/VIS spectrophotometer designed for process water analysis. Offering high-resolution optics with cuvettes of up to 100 mm, the compact device is perfect for complex kinetics or spectral measurements. Prove 600 is preprogrammed for the most sensitive silicate and chloride tests, so you can ...
-
Manufactured by Kam Mining Products Pty Ltdbased in AUSTRALIA
With ever-growing pressures on mining operations, companies are reliant on the life span of their equipment and mining fleet. Dozer equipment is often on the front-line of such operations. Dozer operators should always check the dozer track’s tension is just right, to get the most out of their equipment. If a track is too tight, or too loose, its components will wear faster. On most dozers, ...
-
PremiumManufactured by ENVEAbased in FRANCE
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. The PA-2 was specially designed for process analysis and operation under harsh industrial condition. The system comes with either the VM-3000 or the UT-3000 photometer to meet different requirements regarding accuracy and sensitivity of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and we’ve done the calculations for you; cleanroom ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Leakwise ID-221 sensor detects the presence of and monitors the buildup of thin layers of hydrocarbons on water. Many petroleum and power companies use it for early detection, warning, and control of oil leaks and spills in wet sumps, tanks, and groundwater monitoring wells with a minimum water level of 30 cm (12.0 in). Other applications include hydrocarbon detection and monitoring in ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Leakwise ID-225 sensor measures the thickness and monitors the buildup of hydrocarbons on water. Many petroleum and power companies use it for monitoring and control of oil layers in the following ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Leakwise ID-223 sensor detects the presence of and monitors the buildup of thin layers of hydrocarbons in wet and dry environments. Many petroleum and power companies have installed the ID-223 in wet or dry sumps for early detection, warning, and control of oil leaks and spills ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The Smart Leakwise Controller (SLC-220) is a digital signal processor that interfaces with Leakwise ID-220 Series Sensors to report hydrocarbons spill/leak alerts, including layer buildup and thickness, to users via a wide variety of outputs and communication interfaces for local or remote reporting. The SLC-220’s modular design and flexible configuration provides solutions for all specific ...
-
Manufactured by HMA Geotechnical a division of the HMA Groupbased in AUSTRALIA
The PS-220 Analog Leakwise Controller is a power supply and signal processor that interfaces with a single (1) Leakwise ID-220 Series Sensor to report hydrocarbons spill/leak alerts, including layer buildup and thickness, to users via outputs interfaces for local or remote reporting. The PS-220 has a well-proven reliability and is cost effective for a basic monitoring system. It can be AC or DC ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Colorimetric process analyzer for the automatic, continuous measurement of phosphate. Measuring range: 0.01 to 10 ppm (mg/L) PO4. Based on colorimetric measurement principle according to ISO 6878. Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers. No interferences with silica. Control of sample ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Colorimetric process analyzer (DPD-method) for measurement and dosing control of disinfectants such as free chlorine, hypochlorus acid, chlorine dioxide, ozone, bromine, iodine and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you