Metrohm Process Monitoring Equipment For Monitoring And Testing
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The i-Raman® Prime 532H is a low-noise, high-throughput, and fully integrated Raman system with an embedded tablet computer and a fiber-optic sampling probe. Using a high-quantum-efficiency CCD array detector with TE deep cooling (-25 °C) and high dynamic range, this portable Raman spectrometer delivers research-grade Raman analysis capabilities, including real-time quantitation and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS XDS Process Analyzer – SingleFiber provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of clear liquids are performed directly in the process line or in a reaction vessel. All 4 channels can be configured independently from each other in the software. Single fiber optics ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS Analyzer PRO is a system for the nondestructive, direct analysis of granules, powders, liquids, slurries, or opalescent substances. This instrument can be used to analyze a variety of substances in pharmaceutical, chemical, and petrochemical products. As this analyzer comes with dedicated interfaces, both noncontact and contact analyses are possible. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The ADI 2045VA analyzer is based on the principle of Voltammetric Analysis. The analytical heart of the analyzer is the Metrohm 797 Computrace with Multi Mode Electrode (MME) or Rotating Disk Electrode (RDE) sensor options depending on the application. For online control of water and wastewater quality and industrial mining processes the analyzer is used to determine low concentrations of ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2060 IC Process Analyzer enables customized online ion chromatography monitoring of industrial processes with multiple parameters and streams. Based on the 2060 online analysis platform, the 2060 IC Process Analyzer is a complete and flexible system for online monitoring of ionic compounds in aqueous media from ng/L to % concentrations. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS XDS Process Analyzer – MicroBundle provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of practically any sample type (powders, slurries, liquids,..) are performed directly in the process line, granulator, dryer or reaction vessel. Up to 4 probes and/or flow-cells can be ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The ADI 2045TI Ex proof Process Analyzer is used in hazardous environments where explosion proof protection is a critical safety requirement. The analyzer fulfills EU Directives 94/9/EC (ATEX95) and is certified for Zone-1 and Zone-2 areas. The analyzer design combines a purge/pressurization system with intrinsic safety electronic devices. The air purging phase and permanent overpressure prevents ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2060 Human Interface (HI) is a reliable industrial process controller with a rugged enclosure and high-definition touch screen. Designed with IP65 protection in mind, this process controller is perfect for all industries, especially in harsh environments. The 2060 HI is part of the 2060 process platform, which means that it is highly versatile and flexible in accordance to Metrohm Process ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression and conductivity detection enables fully automatic determination of anions and cations in solutions with low ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2035 Process Analyzer for Thermometric Titration performs automated titrations with a fast-responding, highly sensitive temperature sensor. Instead of the electrochemical potential, the endpoint is determined by enthalpy, i.e., by change in temperature of the solution during the titration. Thermometric titration is by far the most robust titration method available on the market and is ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2035 Process Analyzer for Photometric Measurements includes a compact photometer module which is stable over a large concentration range, and is thermostated with stirrer capabilities. This analyzer is offered with two options: a cuvette system or a fiber optic dipping probe. The cuvette system is compact in order to reduce reagent consumption, yet it offers a long optical path length for ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression, and conductivity detection enables fully automatic determination of anions or cations in solutions with low ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS XDS Process Analyzer – SingleFiber provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of clear liquids are performed directly in the process line or in a reaction vessel. Single fiber optics allows the measuring point to be up to 100 meter away from the XDS NIR process ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Online wet chemical analysis has never been easier with the new compact 202X Process Analyzers. High uptime, low chemical consumption, dependable 24/7 operation, and a user-friendly graphical interface make the 2026 and 2029 process analyzers attractive instruments for your online analyses. Metrohm Process Analytics instruments ensure reliable process monitoring and control day and night, saving ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS XDS Process Analyzer - MicroBundle provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of practically any sample type (powders, slurries, liquids,..) are performed directly in the process line, granulator, dryer or reaction vessel. Up to 9 probes and/or flow-cells can be connected ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Based on NIR XDS technology, the NIRS XDS Process Analyzer belongs to the next generation of process analyzers for real-time analysis. Nondestructive, accurate measurements are performed wherever a product is moving, for instance, above a conveyor belt, web, or ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS Analyzer Pro is a process analysis system employing high-resolution diode array technology. It provides nondestructive analysis of granules, powders, slurries, or opalescent substances directly in the process line without bypass – a true inline ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you