Only show results in Virginia? Ok

Process Water Monitoring Applications

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Water treatment for the pharmaceutical industry

    The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Evaporators and concentrators for aluminium processing

    Washing water and chromate pre-coating, effluent from aluminum phosphate, recovering of sulphuric acid from anodizing wash streams, effluent from polishing processes.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Resin technology solutions for the pharmaceutical industry

    Purolite pharmaceutical resins are used in drug formulations as Active Pharmaceutical Ingredients (APIs) or excipients. They meet the demands of the American (USP), European (Ph.Eur.), British (BP) and Japanese (JP) pharmacopoeias. Drug Master Files are held for each, single, listed pharmaceutical product manufactured in Purolite’s facilities. Pharmaceutical resins used in extraction and purification processes or for the production of water for injectables meet the requirements of both the US Food and...

    By Purolite Corporation based in Bala Cynwyd, PENNSYLVANIA (USA).

  • Premium

    Water monitoring for the pulp & paper industry

    In the field of quality control and process control, AppliTek has developed a unique set of specific monitoring solutions in order to meet the ever-increasing demand for cost efficient paper production. Traditionally, AppliTek is also your one-stop shop for on-line analyzers with regards to environmental compliance.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Industrial solutions for ultrapure water monitoring

    Problem: Trace contamination in ultrapure water (UPW) can have detrimental effects on a manufacturing process in Semiconductor, Power Generation and Pharmaceutical industries. Onsite treatment is conducted to further remove trace impurities from source water.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Freeze Drying

    Lyophilization, commonly referred to as freeze drying, is the process of removing water from a product by sublimation and desorption. The freeze drying process is optimised by the introduction of solvents and gas species to improve product quality and to enhance the drying process. Hiden's gas analysers provide detailed information about the gas/vapour composition during both the primary and secondary drying phases. Detection of the on-set of the secondary drying phase is readily detected. Analysis during the...

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • High-calcium lime slurry for industrial (chemicals & food processing) sector

    Lime is used in many industrial applications to treat plant processing water and as a key ingredient in the production of chemicals and the food processing industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Process Belt Meshes for Belt Filter

    VACUBELT filter belts for belt filters guarantee continuous filtration with high throughput, low residual moisture and optimal results for the filter effect.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • FEDI - Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant’s design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI® process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality...

    By Biowater Technology AS based in Tonsberg, NORWAY.

  • Solutions for Petrochemical

    Petrochemical plants, and especially their process water recovery plants, are a major source of air pollution. If odours are a recurring problem, the emission of greenhouse gases may also be particularly important.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning...

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Instrumentation technologies for offshore industry

    Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables.

    By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.

  • Industrial solutions for process water control

    Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the product.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Industrial water treatment products for chemical processing

    Ethylene, styrene, ammonia, methanol, and other chemical producers require sustainable utility treatment results. Our technology focus is on reducing corrosion and fouling, while meeting compliance, safety regulations, and alternative water resource demands.

    By ChemTreat, Inc. - a subsidiary of Danaher Corporation based in Glen Allen, VIRGINIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you