For the measurement of pulsating volumetric flows in the range of 0.03 ml/stroke – 5 ml/stroke. The flow meter DulcoFlow® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.
Capacity range 17 – 144 l/h, 12 – 4 bar. The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.
Measuring ranges: 0.05 – 10 mg/l and 0.1 – 20 mg/l. Precise measurement of dissolved oxygen with DULCOTEST sensors – very wide range of applications, from the monitoring of water rich in oxygen, including surface water or potable water, to the reliable control of minimal oxygen concentrations when aerating aeration tanks in ...
5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 1,000 m3/h. Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.
Capacity range 120 – 3,800 l/h. Manual polymer batching station Ultromat MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.
Measuring ranges 0 – 100 °C. Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.
Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.
Graduated measuring ranges 0.01 – 10 mg/l. Bromine measurement with DULCOTEST sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.
0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h, up to 6 points of injection possible as standard. Flexible solutions for the production and metering of ClO2 adapted to our customer's tasks, requirements and ...
Graduated measuring ranges 0.01 – 10 mg/l. Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.
Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.
Capacity range of up to 8200 l/h. The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.
Graduated measuring ranges 0.01 – 200 mg/l, special measuring range up to 1,000 mg/l. The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.
Water parameter analysis made easy – with the DULCOMETER diaLog DACa/DACb. The controller DULCOMETER diaLog DACa/DACb is our compact all-rounder for water analysis. With its specially designed functionalities, e.g. processing or interference variables and switchover of control parameters, it closes the control circuit between DULCOTEST ...
Typical measuring range -1,500...+1,500 mV; wider ranges are possible depending on the measuring device. ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.
15 – 12,000 g/h chlorine dioxide. The maximum volume of water that can be treated with metering of 0.2 ppm ClO2, depending on the size of the system: 60,000 m3/h. Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven three-stage safety concept protects people and the environment. The ...
Capacity range 146 – 1,030 l/h, 12 – 4 bar. The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.
The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.