Monitoring & Testing Equipment in New Brunswick

216 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • In: Canada ×

  • In: New Brunswick ×

Leica - Model DigiCat 550i - Underground Utility Locator

by BAP Equipment Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

Leica Geosystems DigiCat 550i Model Number 780232 (60Hz) allows workers to detect buried utilities with ease. The DigiCat 550i from Leica Geosystems is a part of the Leica products brand. Construction companies as well as utility companies want to protect their employees and equipment. Specifically designed to reduce human error, this intelligent ...

Environmental Soil Sampling Kits

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

All stainless steel for environmental sampling. Used in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. Contains the same components as the basic kit but in all stainless. Includes: Regular, sand and mud augers, cross handle, split soil core sampler, slide hammer, three 4' extensions, plastic ...

Groundwater Monitoring Pipes: Bentonite Plugs

by Eijkelkamp Soil & Water     Distributor in NEW BRUNSWICK (CANADA)

When making a bore hole, often to install a monitoring well, impervious strata are often drilled through. If the sealingoperation of such a stratum is not repaired, contamination can easily spread into a water-bearing stratum that was clean prior to the hole being drilled. Here, bentonite can be used as a cheap and relatively simple seal. Due to ...

Aardvark - Automated Constant-Head Borehole Permeameter to Measure Soil Hydraulic Conductivity

by Eijkelkamp Soil & Water     Distributor in NEW BRUNSWICK (CANADA)

The Aardvark permeameter is a fully automated constant-head borehole permeameter to measure soil hydraulic conductivity (Ksat) and other related parameters like sorptivity and percolation in the field. The set can be installed easily and can be used to a depth of 15 m. The permeameter is available for use with a laptop/tablet and for use with a ...

Sediment Core Sampler -Type Beeker

by Eijkelkamp Soil & Water     Distributor in NEW BRUNSWICK (CANADA)

(Set A = basic set) can be used as an independent sampler. Like Multisampler / piston sampler but with lockable head and it is possible to hammer the sampler. 1.0 and 1.5 m long sampling tubes. Only suitable for assessing / pressing out samples on site. Operation almost as simple as Multisampler or piston sampler. Much cheaper than the old Beeker ...

AMS - Dynamic Cone Penetrometer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The ...

Kikkoman - Surface Hygiene Monitoring ATP System

by LuminUltra Technologies Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

kikkomanWherever food residue is present, there is a risk of microbial contamination. While culture tests can detect the presence of microorganisms, ATP tests also detect the presence of food residues and therefore provides a more complete indicator of risk. Also, culture tests take several days for a complete measurement while ATP results are ...

Heron - Model SDI-12 - Interface Cable

by HERON Instruments Inc.     Distributor in NEW BRUNSWICK (CANADA)

SDI-12 Enables Global Communication with the dipperLog NANO's. One of the factors that makes our Serial Digital Interface at 1200 Baud (SDI-12) cable particularly useful is that it operates using a battery but has a negligible current drain. This allows it to maintain the same long life as the the dipperLog NANO.

Well Depth Indicator Probe

by HERON Instruments Inc.     Distributor in NEW BRUNSWICK (CANADA)

The Heron Well Depth Indicator Probe is used to measure the depth of wells and boreholes. The Well Depth Indicator uses a stainless steel probe fitted with a pressure sensitive plunger attached to either the Heron dipper-T or Water Tape water level indicators. The graduated tape, with two stranded stainless steel conductors is stored on a durable ...

AMS - Reinforced Regular Soil Augers

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

AMS Reinforced Regular Soil Augers are specially designed for heavy-duty augering. They are built to withstand unusual, and considerable amounts of power. Three gussets are added to our popular regular augers to provide added strength and durability. The gussets are designed to prevent the top of the soil auger from twisting or bending.

AMS - Soil Compaction Tester

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

Get the best crop yield by measuring the extent and depth of subsurface compaction.

AMS - Regular Soil Augers

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

AMS Regular Augers are designed for use in most soil types. The AMS regular soil auger is commonly used for obtaining disturbed soil samples at or near the surface and for boring to depths where soil samples may be obtained with a separate soil sampler or soil core sampler. The bits of the regular soil auger are open to allow entry of small soil ...

AMS - Model Professional Series (3/4) - Regular Soil Augers

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

The new professional series regular soil augers have been beefed up from bit to bale. They feature the trusted AMS 3/4in threaded connection and have thicker (11 gauge) cutting teeth with stronger welds and extra tungsten carbide hard surfacing. Professional augers are also reinforced with extra gussets welded at both the top and bottom of the ...

LuminUltra Biofilm - Model DSA™ - Deposit and Surface Analysis Test Kit

by LuminUltra Technologies Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

Are you experiencing premature equipment failure due to microbial-influenced corrosion? By forming and populating biofilms on pipe walls and surfaces, microorganisms can survive biocide treatment and accelerate corrosion. Monitoring biofilm development using LuminUltra Biofilm (DSA™ Test Kit) can be used to manage chemical treatment to ...

Luminometer - Standardization Kit (LSK)

by LuminUltra Technologies Ltd.     based in Fredericton, NEW BRUNSWICK (CANADA)

LuminUltra provides a full set of ATP standards (0.01ng/mL - 100ng/mL) in the form of  the Luminometer Standardization Kit (LSK - 5) that can be used to assess the full-range linearity of your luminometer and in some case determine the upper and lower extents of reliable measurement. This can be done on an annual basis whenever the linearity ...

LaMotte - Model LTC-3000 Series - Benchtop Turbidity Meter

by LaMotte Co     Distributor in NEW BRUNSWICK (CANADA)

The dependable choice for your next bench-top turbidimeter, now measures chlorine and color! The LTC3000 is a benchtop turbidity, chlorine and color meter with wide range and high accuracy. ISO unit also available. The meter meets EPA 180.1 for turbidity and EPA 330.5 for chlorine. The turbidity range is 0-4,000 NTU with a MDL of 0.05 NTU. The ...

Well Casing Indicator Probe

by HERON Instruments Inc.     Distributor in NEW BRUNSWICK (CANADA)

The Heron Well Casing Indicator Probe is used for measuring the depth of metal casing in wells and boreholes from 2” diameter and greater. The Heron Well Casing Indicator Probe is a necessary tool when decommissioning wells, installing packers and registering wells with water authorities. An audible and visual signal indicates when the metal ...

Model SB - Undisturbed Soil Sampling: Liner Sampler Set

by Eijkelkamp Soil & Water     Distributor in NEW BRUNSWICK (CANADA)

With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the ...

Soil Test Kits for Soil Analyses

by Eijkelkamp Soil & Water     Distributor in NEW BRUNSWICK (CANADA)

The (agricultural) soil test kits offer simplified methods for determination of available nutrients found in agricultural soils. A series of rapid, accurate chemical tests use standardized reagents to produce color reactions measured against laminated color charts. Colorimetric test methods are used for most test factors. Some tests are based on ...

AMS - Water Level Meters

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     Distributor in NEW BRUNSWICK (CANADA)

AMS Water Level Meters provide reliable and accurate measurements of groundwater levels. Water level readings are taken at the top of the casing with accuracy to within 1/100 of a foot (3mm). They utilize a durable polypropylene storage reel with a rugged solid aluminum frame. Their highly accurate Polyethylene-coated steel tape is available in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you