GA Monitoring And Testing Equipment In Alabama
-
Manufactured by GA Industries, LLCbased in USA
The Figure 922 has a larger venting orifice than the Figure 920 and therefore can efficiently release air from higher flow rate systems. The Figure 922 is available with 2” or 3” (DN50 or DN80) NPT connection size, cast iron body and 316 SS trim and can be supplied with one of two large standard orifices - a 3/8” (4.8mm) diameter for pressures up to 150 PSI (1,034 Kpa) or a ...
-
Manufactured by GA Industries, LLCbased in USA
GA Industries pilot-operated surge relief valves utilize the Golden-Anderson® differential piston main valve operated by a super-sensitive pilot system. These valves are available in sizes 2-1/2' to 24' (65mm to 600mm) and furnished standard ANSI Class 125 or 250 flanged cast iron body, bronze vee-port trim and Buna-N renewable seat for pressures to 400 PSI (2,756 KPa). Consult factory or ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 667V surge relief is available in sizes ½' to 2' with stainless steel body and trim, replaceable Buna-N rubber seat and NPT connections for pressures to 400 PSI. The Figure 667V can usually provide surge protection for systems flowing up to 350 USGPM (22 liters/sec). Consult factory or submit Surge Checklist for sizing ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure X935SS is ideal when the fluid not clean and/or the ambient conditions are corrosive. It is ideally suited to coastal installations or when the vault is subject to flooding. The Figure X935SS is available in 2” x 1” (1” size with 2” NPT connection) or 2” x 2” (2” size with 2” NPT connection) and has a 316 SS body, float, trim and external ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 935 Air & Vacuum valve is recommended when the fluid is not clean, such as wastewater or raw sewage. Its elongated body minimizes spurting and helps keep solids and debris from affecting valve performance. The Figure 935 is available with 2” or 3” (DN50 or DN80) NPT or 4” to 8” (DN100 to DN200) with ANSI or ISO flanged connection. The Figure 935 is a ...
-
Manufactured by GA Industries, LLCbased in USA
Figure 990 Vacuum Breaking valves are suitable for water that does not contain solids or debris and has a fixed opening pressure of approximately ½ PSI (3.5 kPa) BELOW atmospheric. The valve is available from 2-1/2” (DN65) to 12” (DN300) with ANSI Class 125 or Class 250 flanged cast iron body for pressures to 400 PSI (2,758 kPa). The air inlet is supplied with a hood and screen ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 667 surge relief valve is available in sizes ½' to 2' with bronze body and trim, replaceable Buna-N rubber seat and NPT connections for pressures to 300 PSI. The Figure 667 can usually provide surge protection for systems flowing up to 350 USGPM (22 liters/sec). Consult factory or submit Surge Checklist for sizing ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 939 short body allows it to be used in installations when there is insufficient clearance for the standard elongated body wastewater air & vacuum valve. It is available with 2” or 3” (DN50 or DN80) NPT connection size. The Figure 939 is “full ported” with standard cast iron body and 316 SS trim for working pressure up to 200 PSI (1,378 Kpa). Wastewater air ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 350 Air Cushioned Outside Lever & Weight Swing Check Valve is standard with ductile iron body and cover rated for 250 PSI (1,274 kPa) working pressure from 3” (DN80) to 30” (DN750) size, bronze body seat, stainless steel hinge shaft and rubber faced ductile iron disc for drop tight shutoff. A side-mounted totally enclosed stainless steel air cushion chamber minimizes ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 922 has a larger venting orifice than the Figure 920 and therefore can efficiently release air from higher flow rate systems. The Figure 922 is available with 2” or 3” (DN50 or DN80) NPT connection size, cast iron body and 316 SS trim and can be supplied with one of two large standard orifices - a 3/8” (4.8mm) diameter for pressures up to 150 PSI (1,034 Kpa) or a ...
-
Manufactured by GA Industries, LLCbased in USA
SEWAGE VALVES Figure 624, 625 Long Radius Elbow Body, Figure 626 Wye-body. GA Industries offers a wide range of surge relief valves especially designed for use with raw sewage, wastewater, raw water and other solids-bearing fluids. These valves are available from 2' to 16' (50mm to 400mm) and are standard with ANSI Class 125 flanged streamlined body to minimize the collection of solids cast iron, ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 992 Combination Vacuum Breaking and Air Release Valves is a 2-valve assembly consisting of a Figure 990 Vacuum Breaking Valve and a Figure 920 Air Release Valve. It is suitable for water that does not contain solids or debris. The valve is available from 2-1/2” (DN65) to 12” (DN300) with ANSI Class 125 or Class 250 flanged cast iron body for pressures to 400 PSI (2,758 ...
-
Manufactured by GA Industries, LLCbased in USA
The Figure 923 has an extremely large venting orifice to effectively release air from high flow and/or at low pressure, especially when there is an excessive amount of entrained air. The Figure 923 is standard with 4 or 6” (DN100 or DN150) flanged connection size, a cast iron body and 316 SS trim. Four standard orifice sizes are available ranging from ½” to 1” (12mm to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you