Monitoring And Testing Equipment Near Ivory Coast
-
Manufactured by ICE WATER MANAGEMENTbased in FRANCE
Cleaning In Place (CIP) is used to sanitise in the most efficient way and time every single area of the production network. Our CIP unit has been designed for maintaining the cleanliness of the water production ...
-
Manufactured by ICE WATER MANAGEMENTbased in FRANCE
Thanks to its high resistance to biofouling, CCRO new technology deployed by ICE Water Management is particularly effective for treating water that is sensitive to biological clogging, as in the case of water recovery from wastewater treatment ...
-
Manufactured by ICE WATER MANAGEMENTbased in FRANCE
The well unit has been designed to pump water in healthy conditions and to feed bottling water treatment systems. The unit is developed to ensure water quality and continuous monitoring. Well equipment is your tool for preserving and controlling your water ...
-
Manufactured by ICE WATER MANAGEMENTbased in FRANCE
Reverse Osmosis (RO) technology is used to demineralise water, in a non selective, physical process. This technique allows to remove minerals (cations and anions), and colloïds from raw water. The RO unit, heart of your water treatment unit, is designed for adjusting water composition to your target. The unit is adapted to the quality of your raw water as well as the level of automation of ...
-
Manufactured by Side Industriebased in FRANCE
DomoDIP : Small stainless steel lift station, made in France, for connecting private houses to collective sewing network or non collective ...
-
Manufactured by Side Industriebased in FRANCE
The DIP BOOSTER circulators by Side Industrie are derived from the high range of wastewater circulators DIP Systeme®, and are also made of «boiler-plated» stainless steel. They are composed of a shared hydraulic body that fits the pipe size, allowing the gravity flow to go through it. Includes a «by-pass» valve, a level sensor upstream and 2 variable speed hydraulic ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Point level switch for liquids in high-temperature applications. Liquiphant FT70 is a point level switch for use in hazardous areas with all international certificates. FTL70 is especially designed for applications with high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The Commubox FXA195 modem connects HART logged, intrinsically safe measuring devices to the USB interface of a Windows ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Sensor enabling primary element corrosion inspection. Only available for North America. Prowirl C 200 is a product line of carbon steel vortex meters dedicated to the Canadian and American market. The carbon steel sensor offers higher resistance to inter-granular stress corrosion cracking, especially in steam systems for SAGD applications. Prowirl C 200 is only available with cCSAus hazardous ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
For standard hygienic and aseptic applications in the Food & Beverages and Life Sciences industries. This iTHERM thermometer has been designed to meet the basic requirements of the Food & Beverages and Life Sciences industries at the best price. It offers a variety of versions within a clearly segmented standard product. The result: Time and cost savings by simple and fast product ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m. The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 20m. The Prosonic FMU44 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Prosonic FMU90 separated version with field housing or top hat rail housing for control cabinet instrumentation are suited for continuous, non-contact level measurement of fluids, pastes, sludge and powdery to coarse bulk solids. Also the flow measurement in open channels and weirs is possible as the simultaneous measurement of level and flow in a storm water overflow basin with only 1 sensor. Up ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Battery-powered remote cellular monitoring of connected field devices. Connect Sensor FXA30B is a fully integrated, battery-powered cellular gateway with inputs for connecting to a wide range of field devices. Designed to work in rugged industrial environments, the FXA30B is the ideal solution for remote monitoring in places where power is not easily available. It can even be used as power supply ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Combines in-line viscosity and flow measurement with an ultra-compact transmitter. The straight single-tube design of the Promass I 100, provides the regular Coriolis flowmeter outputs of mass flow, density and temperature, additionally it provides in-line viscosity measurement as an optional output. Combined with the smallest transmitter housing available today it delivers full performance on ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Basic model for level liquid applications. Micropilot FMR50 is the best choice in simple reservoir and storage applications as well as in utility processes. The FMR50 free space radar is used for continuous, non-contact level measurement of liquids, pastes and slurries. The measurement is not affected by changing media, temperature changes, gas blankets or vapors. Remote access with SmartBlue app ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Transformation of sensor signals into standardized digital output signals for all industries. Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers digital converted signals from RTD and TC sensors, it also transfers resistance and voltage signals using FOUNDATION Fieldbus™ communication. High ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
For tank side monitoring and controlling of Proservo NMS5 intelligent tank gauge. The Promonitor NRF560 is a monitoring unit for use with the Proservo series of tank gauges. Mounted at the tank side or up to 1,200 meters away (local HART connection). Promonitor provides indication of measured level, temperature data and operating status, and can send operating commands to the Proservo NMS5 from a ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Ultrasonic sensor for level and flow measurement for connection to FMU9x (measuring range up to 10m). The FDU91 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you