Pump And Pipe Analysis Equipment For Monitoring And Testing Available In Pennsylvania
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Excalibur Water Systems develops custom designs for softeners that best suit the end user’s requirements. Based on specific selection parameters, Excalibur supplies softening systems comprising single-tank to multi-tank systems that offer optional skid mount pre-piped designs. Excalibur Water Systems engineers and manufactures a complete line of ion-exchange water softening systems ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Wire Proofer skids are designed to allow the water jets to stream between the steel rails within the piping system. These skids are designed to work within sanitary or stormwater pipes that aid in centering the nozzle within the pipe. This skid increases the power of the nozzle by as much as thirty ...
-
PremiumManufactured by USA Borescopesbased in USA
Modular by design, it is possible to combine the Wohler VIS 400 Visual Inspection System with a variety of camera vipers, camera cables and camera heads. For instance, simply connect either the Wohler 2" diameter or the 1 1/2" diameter pan & tilt camera head to carry out a variety of inspections. Both of these cameras pan 360 and tilt 180 while offering the best possible lighting. After ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Each Proco Series 300 Flanged Rubber Pipe Connector is specifically engineered for your particular application. Multiple plies of tough fabric and helical spring steel wire are embedded into the pipe wall during the manufacturing process, resulting in a product precisely designed for your pressure and vacuum ...
-
based in UNITED KINGDOM
Pipe Flow Wizard is able to perform four different flow and pressure drop calculations on a single pipe depending on the known ...
-
Manufactured by Flex-Weld / Keflex Incorporatedbased in USA
The 10MC is an expansion joint rated to accept the high stress demands of frequent engine start/stop and/or high vibration ...
-
Manufactured by CCI Piping Systemsbased in USA
CCI Pipe Supports are designed for horizontal pipelines allowing for vertical adjustment to adequately support the pipe from the base structure. The base stand options will accommodate the users grade requirements. The variety of head styles provide versatility for various project support needs. In addition, CCI Pipe Supports are available in several corrosion resistant ...
-
Manufactured by Kaspa Foreign Trade Companybased in TURKEY
In accordance with its areas of application, KAS PPR piping systems is designed for continuous temperatures of 0°C to 90°C, and short-term peak temperatures of up to 100°C with a service life of 50 years. Therefore, KAS is the perfect solution for all types of chilled and heating water networks. KAS PPR pipes is also very light in weight which is a big advantage for installation and ...
-
Manufactured by Belimed AGbased in SWITZERLAND
Sterilization of solid and porous products such as filters, seals, containers, textiles and clothing, rubber stoppers, machine and system components is performed using the saturated steam process. The Belimed processes for solid items (BST 6050) are optimally designed for these requirements. The hygienic design and GMP-compliant construction ensure reliable and reproducible ...
-
Distributed by Enerscope Systems Inc.based in CANADA
Enerscope Desanders effectively remove solids from liquids using centrifugal-action. Designed for high efficiency solids removal for dirtiest of applications to keep your fluid stream free of troublesome solids.Designed and constructed to all industry standards such as ASME, ANSI, CRN, PED and NACE among others for your specific application.No Moving Parts, Minimal to Zero Liquid Loss, and ...
-
Manufactured by Arflubased in SPAIN
Globe valves are designed and manufactured according to the following international codes and ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
The AVCO 9500 series ball valve is an enhancement to our 9100 Series valve that enables it to meet the demands of the cryogenic market. The 2-piece design is available from 1/2” through 12” with Class 150 or Class 300 integral flanges. The full port ball minimizes the pressure drop across the valve for a more efficient energy use within the piping system. It is designed to be fire ...
-
Manufactured by FLSmidthbased in USA
Isolate your pumps simply and automatically with our Ball-Check Valves; Isolate the duty and standby pumps in your mineral processing circuit with our two-way, floating ball-check KREBS Tech-Taylor Valve (TT). Requiring no air or electricity to operate, the Tech-Taylor Ball-check valve is the most cost-effective and efficient answer for pump isolation when you have two pumps in ...
-
Manufactured by Insul-Pipe Systemsbased in USA
The hot water piping systems we engineer at Insul-Pipe Systems are constructed of high quality, insulated carrier pipe constructed of steel, CPVC, fiberglass, copper, or ductile iron. These systems are designed with premium quality closed cell polyurethane insulation that not only provides the lowest thermal conductivity available, but also possesses a natural resistance to water penetration. ...
-
Manufactured by Tandem Chillers Incbased in CANADA
Tandem Chillers Inc. designs and manufactures horizontal and vertical single, dual and multiple pump packages for chillers, cooling towers and fluid coolers. Water and Glycol packages with both expansion and open tanks can be supplied in all volumes and sizes. Our flexibility and quick turn around allows us to compliment our standard product line with custom systems at standard equipment ...
-
Manufactured by Insul-Pipe Systemsbased in USA
The underground steam piping systems we engineer at Insul-Pipe Systems are designed to all ASHRAE standards and feature drainable/dryable Class A insulated or standard epoxy coated steel jacketed systems. Steam piping systems are pre-insulated with mineral wool or calcium silicate insulation and jacketed with an epoxy coated steel or double jacketed with an inner steel conduit that is contained ...
-
Manufactured by Georg Fischer Signet LLCbased in USA
The GF diaphragm valve is a fully plastic solution with the best corrosion resistance on the market, easily adapting to differing process conditions. The GF Piping Systems range of plastic diaphragm valves includes manual, pneumatic and electric units in various sizes and for different pressure ranges, guaranteeing the right valve for any piping system. Designed to optimize the flow profile of ...
-
Manufactured by Filtration Group Industrialbased in GERMANY
Nominal pressure 10/25 bar (140/360 psi), nominal size up to ...
-
Manufactured by Aquarius Technologies, LLCbased in USA
The Flexcap™ diffuser solution is designed for high solids applications where fixed orifice coarse bubble or fine bubble diffusers are prone to plugging. The diaphragm check valve diffuser releases air from its underside reducing plugging. The diffuser cap seals tightly to the base of the diffuser preventing any backflow into the diffuser or piping when the air is shut off. Installation ...
-
Manufactured by CrystalStream Technologies (CST)based in USA
The maximum flows shown are usually the 10-year or 25-year flows taken from the pipe system design chart. Water Quality flows are typically 20 to 30% of this flow. Our designs analyze and can accept the largest expected storm flows, but center their efficiency around the water quality storms. Your local regulations may allow slightly higher than maximum flows, or may require slightly lower flow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you