Only show results in Virginia? Ok

Radiation Monitoring Applications

  • Posi-Shell Coatings

    Posi-Shell erosion control coatings are the perfect low-cost solution to protect and stabilize slopes. Our long-term coatings are spray-applied and allow engineers or operators to protect acres (hectares) of slope in a single day. The finished coating is durable and textured, reducing water energy across large areas. The final product eliminates erosion, siltation, and (as a result) expensive rework. The product can be designed to last for years and is easily tracked into slopes when intermediate protection is no longer necessary. Indeed, when integrated, Posi-Shell actually improves soil quality by conditioning it for future seeding. Posi-Shell’s simplicity and durability make it tremendously effective at controlling windblown dust, infiltration, or runoff associated with clean or contaminated stockpiles. Unlike cumbersome tarps or geo-membranes, Posi-Shell erosion control coatings are spray applied and do not require any ballast. Posi-Shell conforms and adheres to any topography and delivers 100% clean runoff. Stockpile loading or removal is accomplished by breaking into the coating where desired. Active areas may be left open or quickly resealed if required. Posi-Shell erosion control coatings are ideal for protecting expensive piles of salt, coal, or cement clinker; and are used extensively for containing hazardous or radioactive soils.

    By LSC Environmental Products, LLC based in Apalachin, NEW YORK (USA).

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental solution for radionuclide monitoring

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Electrical Based Tomography Systems for Interface Detection

    Level detection is a very widespread measurement requirement. Whilst there are many techniques for detecting liquid surfaces, it is much more challenging to identify the interface between liquids and other systems.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Premium

    Waste recovery for nuclear wastes

    Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    NORM Waste

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Gas analysis & monitoring system for water - natural sciences

    In nature, the chemical elements can be represented by more isotopes, or atoms of the same element, characterized by a different number of neutrons in the nucleus. When the proton / neutron ratio does not exceed that value likely to upset the balance of the atom, resulting in the phenomenon known as stabilization of radioactive decay, the isotope is called stable. That is, over time, will not tend to emit energy and sub-nuclear particles to gain energy stability, giving rise, at the end of the process, the daughter nucleus (a different element, characterized by stability energy).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Radiation Monitoring for Nuclear Military Sites

    Deterrence is the cornerstone of Defense, reflected in today`s nuclear military vehicles (submarines, aircraft carriers, aircraft, etc.) and sensitive sites. Defense calls on Saphymo`s exhaustive product range to secure its personnel and equipment and shoulder the emergency services in case of a CBRN threat. All military units are required to be fitted out with detection and decontamination devices, and possess the special expertise needed to manage exceptional events. Nuclear military sites must also be equipped with specialist monitoring devices. Dosimetry, survey meters, access control, Radiation Monitoring Systems, environmental monitoring networks and numerous other solutions offer valuable decision-aid tools, providing fast and accurate information and easier situation assessment.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Premium

    Radiation Monitoring for Nuclear Power

    The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Radiation monitoring instruments for the national labs – laboratories industry

    National labs – laboratories.

    By Technical Associates based in Canoga Park, CALIFORNIA (USA).

  • Premium

    Radiation monitoring instruments for the Engineering- civil, aerospace nautical industry

    Engineering- civil, aerospace nautical.

    By Technical Associates based in Canoga Park, CALIFORNIA (USA).

  • Premium

    Radiation monitoring instruments for the homeland security & military industry

    Technical Associates provides some of the best radiation detection and measurement equipment for Homeland Security. The TBM-3SR, or the Digital Version TBM-3SR-D, is cited by experts for use on every Fire Truck in the United States. The DSI-2 measures background radiation detecting any elevation in radiation. The DSI-2NT Series detects both fast and slow neutrons and model DSI-2GN detects and measures Gammas and Neutrons (Fissile Material).

    By Technical Associates based in Canoga Park, CALIFORNIA (USA).

  • Meteorological Monitoring

    FTS designs complete, turn-key systems for a variety of environmental monitoring applications. Our systems are based upon the Axiom datalogger—a key technology that deliver rugged reliability in any environment, simplicity of operation, low maintenance costs, and extremely accurate data.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Water Treatment Solutions for Radium Removal

    Radium is found naturally in uranium ores. It is an alkaline earth metal that decomposes in water and  it is over a million times more radioactive than the same mass of uranium. As a radiological hazard that emits alpha, beta, and gamma rays, it is a carcinogen.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Flow & Energy Management Solutions for food and beverage

    For food and beverage processing plants, engaging in blending and batching of foods and drinks where issues of hygiene and contamination are of major concern. Also good for measuring the raw materials used for production.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Noise monitoring solutions for noise source identification

    Before you can determine what design changes are appropriate to reduce the noise emitted by a product, you need to be able to characterise it in terms of: Spectral content: The location of the dominant sources. The relative importance of dominant sources. Noise Source Identification employs a number of tools to perform such a characterisation.

  • Premium

    Environmental radiation monitoring

    Every day, wherever we go, we are exposed to minute amounts of environmental radiation.* This environmental radiation is emitted continuously, day and night, from various objects and substances in the natural world and our living environment.

    Most environmental radiation consists of three types: alpha rays (α), beta rays (β) and gamma rays (γ).  HORIBA`s PA-1000 `Radi` environmental radiation monitor makes it easy for non-specialists to measure even minute levels of gamma rays.

    * Environmental radiation, also known as natural radiation, includes radiation emitted from space, soil, stones, the ground and the air, as well as from manmade objects such as concrete and buildings

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Digital Pathology

    Digital Pathology is an image-based information environment enabled by virtual microscopy. This involves imaging glass slides and saving and distributing their digital images for analysis, archiving and storage. The virtual microscopy slides are: •Scanned — using a microscope based scanning device that takes images of the whole slide via large scanning or stitching of smaller scans. This involves a motorized stage to scan the whole slide. Light source stability is important for scanning in order to prevent illumination variation across the whole scan. The X-Cite® exacte is commonly used in slide scanning systems. •Viewed — on a computer via viewing software •Managed — some of the slides have a barcode that is also scanned to enable archiving with patient information •Analysed — using image analysis tools and software, structures maybe automatically identified and quantified •Shared — digital pathology files may be shared over a network to gather additional expert opinion Digital pathology technology in no way replaces the expert eye and diagnosing power of a pathologist and a doctor. The only thing it saves is time to image the samples and also provides an efficient and organized way to archive the virtual microscopy slides for future consultations, record-keeping and disease comparison.

    By Excelitas Technologies based in Mississauga, ONTARIO (CANADA).

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L Company Ultrameter II™ 4P or 6P, a suitable container, and a mixture of Dl (deionized) water and alcohol.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you