Rain Monitoring Equipment For Monitoring And Testing Near Virginia
-
Manufactured by Stevens Water Monitoring Systems, Inc.based in USA
The tipping bucket rain gage is recognized as the standard for measuring rainfall and other precipitation in remote and unattended locations. The integrated siphon mechanism delivers high levels of accuracy across a broad range of rainfall intensities. Each unit consists of a collector funnel with stainless steel leaf filter, an integrated siphon control mechanism, an outer enclosure with quick ...
-
Manufactured by Stevens Water Monitoring Systems, Inc.based in USA
The tipping bucket rain gauge is recognized as the standard for measuring rainfall and other precipitation in remote and unattended ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by means of a relative measurement. For such a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
Manufactured by Tisch Environmental Inc. - Tisch Internationalbased in USA
Designed as an Atmospheric Precipitation Sample, Acid Precipitation Sampler for accurately separating and collecting both total precipitation and total particulate deposition for later laboratory analysis of pH, conductivity, and specification.The Model A.P.S. is designed for severe environments with a main frame constructed of heavy gauge aluminum and powder coated, and holds two symmetrically ...
-
Manufactured by American Ecotech LLCbased in USA
The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM25 or TSP particulates and basic meteorological parameters. The MicroVol 1100 is suitable for both indoor and outdoor applications. The unit is microprocessor controlled and uses a mass flow sensor in conjunction with ambient temperature and pressure sensors to automatically maintain a constant volumetric ...
-
Manufactured by American Ecotech LLCbased in USA
The HiVol 3000 PUF Sampler provides a flexible platform for sampling organic compounds and monitoring basic meteorological parameters. The PUF utilises poly-urethane foam (PUF) to collect particulate matter and store it in a sterile environment for later ...
-
Manufactured by American Ecotech LLCbased in USA
Ecotech’s Rainmaster 1000 Tipping Bucket Rain Gauge is a simple, reliable device for measuring and sampling rainfall. Each unit consists of a collector funnel with leaf filter, an integrated measurement mechanism and an outer enclosure with quick release fasteners. The bucket tips when precipitation of 0.01 inch, 0.2mm or 0.5mm has been collected. Each tip activates a reed switch closure ...
-
Manufactured by American Ecotech LLCbased in USA
The MegaVol 3000 particulate sampler performs remote unattended sampling of particulates and is ideal for heavy metal and radiation exposure monitoring. The MegaVol is capable of a very high flow rate (120-150m3/hr) the increased flow rate allows representative particulate samples to be collected in shorter time periods (more samples collected per week) or to collect a larger quantity in the same ...
-
Manufactured by American Ecotech LLCbased in USA
The HiVol 3000 particulate sampler performs remote unattended sampling of PM2.5, PM10 or TSP along with basic meteorological parameters. The HiVol 3000 incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly representative sample of particulate matter. Optional attachments allow the sampler to measure wind speed and ...
-
Manufactured by Casella - TSI Incorporatedbased in UNITED KINGDOM
The Casella Tipping Bucket Rain Gauge (TBRG) is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel are made from aluminium alloy with an accurately machined septum ring at the top giving an aperture of 400cm2. The tipping bucket mechanism is mounted inside the body on a cast aluminium-alloy base, ...
-
Manufactured by Casella - TSI Incorporatedbased in UNITED KINGDOM
The Casella Tipping Bucket Rain Gauge (TBRG) is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel are made from aluminium alloy with an accurately machined septum ring at the top giving an aperture of 400cm2. The tipping bucket mechanism is mounted inside the body on a cast aluminium-alloy base, ...
-
Manufactured by Casella - TSI Incorporatedbased in UNITED KINGDOM
The Casella Tipping Bucket Rain Gauge (TBRG) is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel are made from aluminium alloy with an accurately machined septum ring at the top giving an aperture of 400cm2. The tipping bucket mechanism is mounted inside the body on a cast aluminium-alloy base, ...
-
Manufactured by PHOENIX Process Equipment Co.based in USA
Our PHOENIX water recycling experts will help you maximize water conservation and minimize cost, creating a site specific solution for your project. Look no further, PHOENIX supplies all the critical pieces necessary for a successful rainwater or stormwater recycling scheme. And don’t forget our rainwater systems can be easily incorporated with a greywater or blackwater system to provide ...
-
Manufactured by Precision Systemsbased in USA
The Storm Box is a clam shell enclosure that was designed to house all of the components required for a remote water monitoring/sampling project. Placing the expensive water monitoring in a pad-lockable out of sight out of mind enclosure helps ensure the safety of this equipment and ensure that monitoring is done correctly the first time. The enclosure is manufactured in molded fiberglass to ...
-
Manufactured by OTT HydroMetbased in GERMANY
This professional Rain Gauge is a superb product for all kinds of applications: from hydrology to meteorology, from agriculture to industrial monitoring - this device is fit for nearly ...
-
Manufactured by OTT HydroMet Solar Energybased in USA
The OTT Parsivel² is a modern laser disdrometer for comprehensive measurement of all precipitation types. The Parsivel² captures both the size and speed of falling particles, classifying them into one of 32 separate size and velocity classes. The raw data are used to calculate the type, amount, intensity and kinetic energy of the precipitation, the visibility in the precipitation, and ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The OTT Parsivel² is a modern laser disdrometer for comprehensive measurement of all precipitation types. The Parsivel² captures both the size and speed of falling particles, classifying them into one of 32 separate size and velocity classes. The raw data are used to calculate the type, amount, intensity and kinetic energy of the precipitation, the visibility in the precipitation, and ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The LUFFT WS100 is a radar precipitation sensor with adjustable heating. Using a 24-GHz Doppler radar, it measures the speed of all forms of condensed water including rain, freezing rain, hail, snow, and sleet. The low-energy sensor detects precipitation from the first drop. Its possible uses are nearly unlimited. Whether in hydrology and water management, agricultural and environmental science, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you