Refrigerant Gas Monitoring Equipment For Monitoring And Testing Available In Algeria
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. The DensiControl DA allows quick checking to see whether the density monitor switching points are triggered in time. This device allows precise, quick and easy verification of the switching points. The density monitor type to be checked is selected in the data base and is then installed ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
These tanks offer sufficient volume to store or withdraw even large gas quantities in gaseous or liquid form – special feature of this type series: for withdrawal of liquid gas, the entire gas content can be withdrawn all at once without having to heat the tank. The tanks are equipped with digital weighing scales. These weighing scales enable to determine the filling weight with an accuracy ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With its innovative equipment and intuitive user interface, the MultiAnalyser SF6 meets the user’s requirements and is ready for operation immediately after switching on. High-quality manufacture and ergonomic design guarantee the quality standards for a compact and maintenance-friendly measuring device with high measuring accuracy. This multi-functional measuring device allows the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The cordless battery operated device measures in seven levels of sensitivity within a short response time. Even after the detection of large leaks the device returns to zero position quickly. The SF6 LeakPointer is easy to operate with one hand. Leakages can be easily detected via the clearly visible LED display or the audible signal (can be switched off). Continuous operation of the device is ...
-
PremiumManufactured by Testo, Inc.based in USA
For refrigeration engineers: Compact kit containing testo 549i high-pressure gauge and testo 115i clamp thermometer (two of each). Used in conjunction with your smartphone/tablet, the kit is ideal for servicing, troubleshooting and installing air conditioning and refrigeration systems. The testo Smart App makes your work easier and more efficient: over 90 stored refrigerants, automatic ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
During the operation of gas insulated switchgear decomposition products might occur after a breakdown which has a negative impact on the gas quality in the circuit breaker as well as on the insulation properties. For this reason the measurement of decomposition products is very important. The measurement can be carried out easily by means of test tubes and plastic ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 875 KF Gas Analyzer from Metrohm is a fully automated solution to determine trace levels of water in liquefied and permanent gases. Applying coulometric Karl Fischer titration, this instrument allows quick (< 5 minutes) and accurate analyses. The KF Gas Analyzer is suitable for a variety of gas types. ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
B152R41 / B152R41S15: Mass flow measuring system with an additional resettable, adding and subtracting counter. B152R51: Mass flow measuring system ( battery-operated with charge indicator). Battery operation enables an application independent of the power supply. With this device, gas monitoring is just that simple. Gas quantities which are filled in and recovered are registered and can be ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Volatile Organic Compounds Detector, REF-IR-ST Sensor/Transmitter, is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity ...
-
PremiumManufactured by Testo, Inc.based in USA
For refrigeration engineers: Compact kit containing testo 549i high-pressure gauge and testo 115i clamp thermometer (two of each). Used in conjunction with your smartphone/tablet, the kit is ideal for servicing, troubleshooting and installing air conditioning and refrigeration systems. The testo Smart Probes App makes your work easier and more efficient: over 90 stored refrigerants, automatic ...
-
PremiumManufactured by Testo, Inc.based in USA
Pressure and leakage measuring instrument DVGW-approved for all tests at gas and water pipes as load and tightness test and serviceability ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The MGS-550 can easily be connected to any central BMS control system (via Modbus connection) or, with its three onboard user-assignable relays, can easily function as a stand-alone unit without the need to wire alarm devices back to a central system. Providing the ultimate in flexibility, the instrument can be upgraded at any time from a one-sensor unit to a two-sensor system by simply ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3731 SF6 leak detection system uses photoacoustic spectroscopy (PAS) technology. It offers highly accurate and stable quantitative gas ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The central management, supply and control unit displays the measured values and messages of the connected Sensors which measure the concentration of different gases in ambient air. The Monitor allows to display and record the measured values as well as to register messages. The potential-free relays serve for controlling further warning systems. Up to 32 Sensors can be controlled and monitored. ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Prevent high maintenance costs by monitoring and maintaining the right dew point in your system. Too much water in your system can lead to e.g. forming of rust, freezing of valves, and even product loss when the moist content is too high for your coating or paint process. Stay in control of your dew point with the VP Dew Point ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you