Remote Sensing Equipment For Monitoring And Testing In Sweden
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
BPC® BioReactor Simulator (BRS) is a universal platform for simulating anaerobic fermentation processes in a continuous mode of operation. Operated on site or remotely, the simulator produces high quality data to give deeper knowledge of how suitable a potential feedstock is for biogas production, defining the suitable organic loading rate or retention time for a given feedstock, designing ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The High Sensitivity Liquid in Situ (HSLIS-M65e) Liquid Particle Counter provides continuous, real-time monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF). A long-standing and ever-popular piece of Particle Measuring Systems‘ (PMS) complete liquid particle counting line, the HSLIS Liquid Particle Counter makes it easy to always understand the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software ...
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 75/80 was specially developed to carry out electrodynamic filter damage and leakage monitoring in industrial filter ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave barrier for contactless detection of dry bulk solids with ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flows with trend ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Air-ultrasonic sensor for connection to flow transmitters NivuFlow Mobile 750 for non-contact level measurement in part filled flow measurement ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Particle Measuring Systems’ HSLIS-M50e Deionized Water Particle Counter provides continuous, real-time monitoring of contamination. The instrument makes it easy to understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of the HSLIS Liquid ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For portable and high accurate flow measurement: For portable ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
PremiumManufactured by ENVEAbased in FRANCE
FlowJam T is a sensor that has been specially developed for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically non-conductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. The sensor is mounted around the tube for ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For portable and high accurate flow measurement. For portable ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
NivuLevel Mobile is a self-sufficient system with well-thought-out power management for reliable level measurements, data logging and convenient data transmission. NivuLevel Mobile is a self-sufficient system for reliable level measurements, data logging and convenient data transmission. The sophisticated power management and the built-in modem allow for long-term measurements with automated ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For portable flow measurement: For portable ultrasonic flow measurements from slight to heavily polluted media using the Doppler principle in part filled and full pipes and channels. Measurements are absolutely necessary when it comes to assess the hydraulic conditions of sewage networks or special constructions. The importance of portable, power-independent flow meters for determination of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Connect your sensors, like a water level logger and water quality probe, to our new GDT Prime Plus and transmit sensor data to anywhere in the world. Our GDT Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by ENVEAbased in FRANCE
Paddy has been developed to supply a trending information of pulverization. It measures changes in particle size for instance to detect screen breaks. Paddy is insensitive against contaminations and works without a ...
-
Manufactured by Aqua Robur Technologies ABbased in SWEDEN
Powered by innovative energy harvesting, the Fenix Hub 200 is the ultimate self-powered IoT device capable of managing data and energy in a sophisticated way. Equipped with multiple I/Os and combined with innovative energy harvesting, Fenix Hub 200 is a premium product giving great abilities to sample various sensors with near real time radio transmission. Commonly used to power MAG-meters to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you