Research Sampling Equipment For Monitoring And Testing Available In Indiana
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Nitrachek reflectometer, measuring range 5-500 ppm with date and time related data storage, with 100 nitrate test strips, calibration solution and accessories in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This translucent teflon and stainless steel sampler is specially suitable for the indication of layers, measuring the thickness of the floating layer and the sampling of drums, tanks on lorries, gully holes and shallow oil separators. With the liquid layer sampler also depth specific samples can be taken. The translucent sample tube allows for immediate research in the field of for instance the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Grass plot sampler large, Ø 23 mm, operational length 10 cm, total length 95 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push/pull handle. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes, the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion hammer (Cobra TT), is standard equipped for drilling to a depth up to 5 meter. The complete set contains: a gasoline driven percussion hammer with accessories and wooden transport box, various extension rods, coupling sleeves, percussion gouges (combination type for various types of soil) in various ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In addition to ordinary percussion gouges it is possible to apply a core sampler with a synthetic sampling tube or foil liners. These are transparent to facilitate immediate visual inspection in the field. The special cutting head has been fitted with an exchangeable core catcher in order to avoid loss of sample or sample contamination. The undisturbed sample can be sealed for transport to a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The free-fall corer is a sampling tool for fairly undisturbed sampling from the top layer of submerged sediments either or not consolidated. The free-fall corer consists of a frame with strengthening ribs, falling weight and sampler. Using a hoisting unit (davit) on board of a boat the sampler is lowered in free fall. By its own weight and velocity the apparatus penetrates the submerged ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Root research is executed to improve the insight in the possibilities for root growth (depth and concentration) of the root system of trees and plants. In general it is important to all plants to have a dense and extensive root system in the soil. An extensive root system allows the plant to benefit from a large volume of soil. If sufficient quantities of nutrients and water are present the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The peat profile sampler, type Wardenaar, is an apparatus for sampling intact, undisturbed peat profiles in peat lands up to a depth of 1 meter. The peat profile sampler consists of a rectangular stainless steel box casing, divided lengthwise into two halves, with very sharp specially shaped cutting edges at the base. The handgrip hinging with both halves allows both halves to be pushed into ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard set for pF-determination pF 0 - 2.0 (0 - 0.1 bar) consists of the sandbox with control panel, suction levelling stand, water supply bottle with stand, filter cloth (140-150 micron), a number of containers synthetic sand, grain size approximately 73 micron and various ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. The sample containing section is sealed off by a plate (fin) that can pivot around the axle in the middle of the sampler and that is fitted ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
With our soil sampling kit, you always have an easy and cost-effective tool available to collect soil samples from soft to medium dense soils. Gouda Geo-Equipment is specialized in CPT equipment and has years of experience in this research domain. Our soil sampling kit is lightweight, but powerful and much more versatile than hand-operated drilling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The set contains: an electrically driven percussion hammer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded petrol. The pump is not sensitive to polluted water and the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you