Sample Combustion Equipment For Monitoring And Testing Available In Liechtenstein
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Module (Oven + ABD ) enables sample digestion during pyrolysis and oxidation of all types of flammable samples. The Combustion Module is comprised of the combustion oven and the Auto Boat Driver (automatic sample introduction). Both are products made by Analytik Jena which have been optimized specially for coupling with ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Solid Autosampler CIC (TEI) is used for automated analysis of solid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020). The sample rack for solids no. 1 (6.07312.010) and a cover for the sample rack are already ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Oven (TEI) is the central unit for pyrohydrolytic combustion of samples as preparation for subsequent analysis with ion ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Your entire C/N/S/X lab in one device: Extensive range of applications without device modification. A single analyzer for solid, liquid, gaseous and LPG samples. Self Check System for unattended operation and reliable results. Vertical and horizontal combustion in one ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful: wide dynamic range and continuous calibration. Cost-effective: high sample throughput and fast analysis times. Versatile: also for direct solid ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-300 explosion-proof sampling probe is for the explosion-proof occasions. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Auto Boat Drive (ABD) automatically guides the sample boats into the combustion oven. The sample can be put into the boat manually or using an appropriate sampler. This product made by Analytik Jena has been specially optimized for coupling with ion ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas resistance; high precision temperature control, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Liquid Autosampler CIC (TEI) is used for automated analysis of liquid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020) and the Liquid Introduction Module ...
-
Manufactured by Eltra GmbH - part of Verder Scientificbased in GERMANY
The new carbon / sulfur analyzer ELEMENTRAC CS-i was developed for the accurate and safe analysis of carbon and sulfur in inorganic samples. The analyzer is equipped with a powerful induction furnace for sample combustion. Up to four highly sensitive infrared (IR) cells allow the analyzer to determine both high and low carbon and sulfur concentrations in only one measurement run. The measuring ...
-
Manufactured by Process Insights, Inc.based in USA
Our COSA 9800 calorimeter is a fast response, injection-style zero-hydrocarbon emissions calorimeter. It can provide direct measurement of Calorific Heating Value and BTU with a measurement range 0-3000 BTU/scfh. A real advantage with the 9800 calorimeter is that it can handle high sulfur concentrations with an H2 measurement ...
-
Manufactured by Novatech Controls Pty Ltdbased in AUSTRALIA
In-situ Oxygen Analysis for Concentrations as low as 1 × 10-30% to ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
The 1030S Solids Module is a sample preparation module enabling the analysis of the total organic carbon (TOC) or total carbon (TC) content in solid materials. The 1030S module is operated in conjunction with an Aurora 1030W or 1030C TOC ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you