Sample Combustion Equipment For Monitoring And Testing Available In Tuvalu
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-300 explosion-proof sampling probe is for the explosion-proof occasions. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Oven (TEI) is the central unit for pyrohydrolytic combustion of samples as preparation for subsequent analysis with ion ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Module (Oven + ABD ) enables sample digestion during pyrolysis and oxidation of all types of flammable samples. The Combustion Module is comprised of the combustion oven and the Auto Boat Driver (automatic sample introduction). Both are products made by Analytik Jena which have been optimized specially for coupling with ion ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Solid Autosampler CIC (TEI) is used for automated analysis of solid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020). The sample rack for solids no. 1 (6.07312.010) and a cover for the sample rack are already ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Auto Boat Drive (ABD) automatically guides the sample boats into the combustion oven. The sample can be put into the boat manually or using an appropriate sampler. This product made by Analytik Jena has been specially optimized for coupling with ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Liquid Autosampler CIC (TEI) is used for automated analysis of liquid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020) and the Liquid Introduction Module ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Your entire C/N/S/X lab in one device: Extensive range of applications without device modification. A single analyzer for solid, liquid, gaseous and LPG samples. Self Check System for unattended operation and reliable results. Vertical and horizontal combustion in one ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful: wide dynamic range and continuous calibration. Cost-effective: high sample throughput and fast analysis times. Versatile: also for direct solid ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas resistance; high precision temperature control, ...
-
Manufactured by Eraly & Associésbased in FRANCE
The MIPO 5 SERVOCOULOMETER, is an analyzer used to measure total chlorine (and other halogens) by means of coulometric method. Its measuring capacity extends from traces (80%). It is also used to measure chlorine On Chlorinated PVC-C. In addition to the accessories for measuring EOX and POX, we offer complete equipment for AOX dosing by agitation and ...
-
Manufactured by Process Insights, Inc.based in USA
Our COSA 9610™calorimeter measures Wobbe Index, BTU/Heating Value and CARI (Combustion Air Requirement Index). Key advantages of this calorimeter is its insensitivity to changes in ambient temperature, a very fast response with the ability to measure gases with BTU values down to zero and the measurement of the Combustion Air Requirement Index besides Wobbe Index and Heating Value. Using ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
Consisting of PC-controlled and stand-alone models, the Shimadzu TOC-L Series of laboratory total organic carbon analyzers offers the optimum selection of performance features and options to meet the specific requirements of total organic carbon testing in a wide range of aqueous samples. An ultra-wide measurement range and Shimadzu’s patented 680°C Combustion Catalytic Oxidation/NDIR ...
-
Manufactured by Concept Equipment Limitedbased in UNITED KINGDOM
The BS476-6 Fire Propagation test provides information on the influence that a simple material, a composite of materials or an assembly of materials, would make to the rate of fire growth within a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you