Sample Combustion Equipment For Monitoring And Testing Near Australasia
-
Manufactured by Magee Scientific Companybased in USA
The Magee Scientific Total Carbon Analyzer, Model TCA08, is a revolutionary new instrument that measures the Total Carbon (TC) content of suspended aerosol particles in real-time for laboratory research, field work, and routine air-quality monitoring ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The ECOTECH VOC1000 is designed to measure methane, non-methane and total hydrocarbon gases providing accurate and reliable measurement data. The VOC1000 analyser provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of ...
-
Manufactured by DEWESoftbased in SLOVENIA
High-accuracy combustion analyzer system for engine research, development and optimization and testing of ignition systems, exhaust systems, and valve control ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The AAF ashing furnace range is designed specifically to provide optimum ashing conditions to ensure complete combustion of the sample. The AAF 11/3 & AAF 11/7 ashing furnaces provide a continuous flow of preheated air through the chamber, and are designed to comply with ISO 1171:2010, ASTM D3174-04: 2010 and ASTM ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
This apparatus uses catalyst assisted combustion techniques to give a clean and precise approach to extracting carbon-14 & organically bound tritium or ‘fixed tritium’, eg tritium contained in concretes, steels and graphites, as well as ‘free water’. A catalyst is used to ensure complete combustion of all thermal decomposition products. These are captured for liquid ...
-
Manufactured by Novatech Controls Pty Ltdbased in AUSTRALIA
In-situ Oxygen Analysis for Concentrations as low as 1 × 10-30% to ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful: wide dynamic range and continuous calibration. Cost-effective: high sample throughput and fast analysis times. Versatile: also for direct solid ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
Manufactured by Elementar Analysensysteme GmbHbased in GERMANY
Experience nitrogen and protein analysis with increased laboratory efficiency. The rapid MAX N exceed nitrogen and protein analyzer operates according to the safe, simple, and eco-friendly Dumas combustion method and offers fast and cost-effective nitrogen and protein determination in just five minutes. Designed for unattended 24/7 operation, the analyzer addresses the needs of any ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for graphite furnace and hydride technique. Highly sensitive trace analyzer for recurring measurement tasks, upgradeable for direct solid ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Your entire C/N/S/X lab in one device: Extensive range of applications without device modification. A single analyzer for solid, liquid, gaseous and LPG samples. Self Check System for unattended operation and reliable results. Vertical and horizontal combustion in one ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Auto Boat Drive (ABD) automatically guides the sample boats into the combustion oven. The sample can be put into the boat manually or using an appropriate sampler. This product made by Analytik Jena has been specially optimized for coupling with ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Module (Oven + ABD ) enables sample digestion during pyrolysis and oxidation of all types of flammable samples. The Combustion Module is comprised of the combustion oven and the Auto Boat Driver (automatic sample introduction). Both are products made by Analytik Jena which have been optimized specially for coupling with ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Oven (TEI) is the central unit for pyrohydrolytic combustion of samples as preparation for subsequent analysis with ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Solid Autosampler CIC (TEI) is used for automated analysis of solid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020). The sample rack for solids no. 1 (6.07312.010) and a cover for the sample rack are already ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Liquid Autosampler CIC (TEI) is used for automated analysis of liquid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020) and the Liquid Introduction Module ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you