Only show results available in Connecticut? Ok

Sample Conditioning Applications

  • Premium

    Particle measurement and sampling equipment for Engine emissions

    Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For tailpipe emission measurements, we have solutions for both CVS and tailpipe sampling, both upstream and downstream exhaust after-treatment devices. Our sample conditioning instruments can be connected to any particle measurement instrument and allow engine exhaust measurements from various conditions and engines. Both dynamometer and on-board conditions. CVS...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Non-Road engine emissions

    Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement location. Our sample conditioning instruments can be...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    UV fluorescence technology for raw water intake monitoring industry

    The Situation: Hydrocarbons in municipal water supplies, including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through undetected. Desalination systems using reverse osmosis (RO) membranes can be irreversibly damaged by the presence of hydrocarbons...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Particle measurement and sampling equipment for Stationary source emissions

    Dekati has over 25 years of experience in providing measurement solutions for emission measurements. Today, our selection of measurement solutions for stationary source emission measurements include both real-time and gravimetric detection of concentration and particle size distribution. Our extensive line of sample conditioning devices enable not only environmental emission measurements but also measurements directly from the combustion zone and before heat exchangers and used flue gas cleaning devices. Dekati...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Particle measurement and sampling equipment for Aerosol research

    Dekati has 25 over years of experience in providing high end aerosol research instrumentation and sample conditioning solutions to universities, research institutes, and laboratories all around the world. Dekati® Instruments and sample conditioning systems have a long, exquisite track record of scientific publications and our in-house R&D continuously develops new are more accurate ways to characterize different aspects of aerosols. Particle size and concentration studies. Particle shape and density...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Fire detection solutions for the power stations sector

    One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital equipment.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Chemiluminescense based analyzer for automotive applications

    Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Flow measurement instrumentation for emissions & analytical solutions

    Sierra manufacturers the BG3 Elite Partial Flow Dilution system for use in diesel particulate sampling. BG3 Elite is a direct replacement to cumbersome full flow CVS systems in both heavy and light duty emissions applications. The BG3 Elite can feed properly conditioned diluted sample flow to a Bag Mini-Diluter for gaseous analysis or even to a Particle Number measurement device.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Particle measurement and sampling equipment for Air quality

    Dekati® Solutions for air quality particle measurements include both air quality monitoring and atmospheric aerosol research instruments. Our aerosol measurement solutions have been successfully used in various ambient aerosol research and monitoring areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of airborne particles

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Transportable Emissions Analyzer for Art of Emissions Monitoring and Sampling: Maintaining Gas Integrity

    Accurate emissions monitoring from industrial processes is critical for determining overall system combustion effciency, environmental compliance and safety. However, there is no “one-size-fits-all” approach to proper emissions monitoring as each application encompasses different system considerations. The art of emissions monitoring and sampling requires:

    By E Instruments - Sauermann Group based in Langhorne, PENNSYLVANIA (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3,...

  • Paper & Pulp Industry Emissions Monitoring

    The Procal 2000 emissions analyser is ideally suited to the harsh environments associated with Paper & Pulp Plants.  The in situ, multi-component Continuous Emission Monitoring (CEM) system has an integrated auto-zero and calibration facility, thereby removing the need for intervention by maintenance staff under normal conditions.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Flame Photometer for Measurement of Calcium and Potassium in Cereals

    Commercial cereals vary considerably in composition, both in their formulation and the ingredients added to enrich these products. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium salts.

    By BWB Technologies based in Newbury, UNITED KINGDOM.

  • Measurement solution for HF emissions from brickworks

    Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you