Sample Conditioning Applications in Asia & Middle East
-
Premium
Continuous Emissions Monitoring System (CEMS) for Determination of a Gas
Continuous emission monitoring system (CEMS) is the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission and transmit the information to the Continuous Emission Monitoring system. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Particle Measurement Instruments for Engine Emissions
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Premium
Particle Measurement Instruments for Air Quality Monitoring
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Premium
Particle Measurement Instruments for Non-Road Engine Emissions
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Premium
Chemiluminescense based analyzer for automotive, aviation, marine, and combustive engines sector
Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. ...
By ECO Physics AG Distributor in Toongsonghong, Laksi, THAILAND.
-
Premium
Particle Measurement Instruments for Occupational Health and Industrial Hygiene
Dekati measurement solutions for occupational health and industrial hygiene include both portable and stationary PM measurement systems as well as solutions for overall industrial hygiene measurements according to ISO16000-34 and ISO16000-37. Our aerosol measurement solutions have been successfully used in various health and safety monitoring and research areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Water Measurement Monitors for Raw Water Intake Monitoring
The Situation: Hydrocarbons in municipal water supplies, including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through undetected. Desalination systems using reverse osmosis (RO) membranes can be irreversibly damaged by the presence of ...
By Turner Designs Hydrocarbon Instruments, Inc. Distributor in Haidian District, Beijing, CHINA.
-
Flow measurement instrumentation for emissions & analytical solutions
Sierra manufacturers the BG3 Elite Partial Flow Dilution system for use in diesel particulate sampling. BG3 Elite is a direct replacement to cumbersome full flow CVS systems in both heavy and light duty emissions applications. The BG3 Elite can feed properly conditioned diluted sample flow to a Bag Mini-Diluter for gaseous analysis or even to a Particle Number measurement ...
By Sierra Instruments, Inc. Distributor in Dhaka, BANGLADESH.
-
Patented Innovative Monitoring Technology for Buildings & Structures Industry
SoundPrint is a patented innovative monitoring technology that can detect and locate failures in high-strength steel wire, strand, or cable through continuous, non-intrusive remote ...
By Pure Technologies - a Xylem brand Office in Yangpu District, CHINA.
-
Gas Monitoring Solutions for Waste Anesthetic Gas
Not a day goes by in modern hospitals and health care institutions without the use of inhaled anesthetics for general anesthesia. Inhaled anesthetics have seen a great improvement over time. Anesthetic effect is being safer for patients and health care workers. However, occupational exposure to waste anesthetic gases (WAG) is far from being a problem solved. It is well agreed to keep the occupational exposure to a reasonable minimum by improved scavenging, ventilation and working habits alongside following ...
By Gasera Ltd Distributor in Haidian District, CHINA.
-
Laboratory solutions for environmental industry
As a laboratory, your reputation rides on – and your clients’ businesses depend on – your ability to manage multiple sample types and sources and produce accurate reports for regulatory compliance. ATL’s LIMS streamlines processes, shortens turnaround time, and takes the headaches out of reporting for environmental testing ...
By Confience Office in Dubai, UNITED ARAB EMIRATES.
-
Filtration for Flue Gas Analysis and CEMS
Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 ...
By Shanghai CMI Environmental Technology Co., Ltd. based in Shanghai, CHINA.
-
Headspace Assay of Polymers used in the Automotive Industry with an HT3 Dynamic Headspace Instrument
Synthetic and natural materials are used extensively by the motor vehicle industry to provide customers appealing and safe vehicle interiors. Discover how SCION Instruments can be used to analyze polymers from the automotive ...
By Scion Instruments - Techcomp Group Office in Hong Kong, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you