Sample Conditioning Equipment For Monitoring And Testing Available In Ukraine
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati ePNC is an innovative particle counter sensor designed specifically for easy integration in Periodic Testing and Inspection (PTI) devices. This PN counter fills all requirements of the upcoming NPTI regulation for a particle number ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Based on the Clean Air Act as well as local regulations, increasingly stringent environmental regulations require the overall reduction of Sulfur emissions. Consequently, it is necessary to monitor and control specific sulfur constituents and total sulfur content in products that are combusted and emitted. Siemens on-line MAXUM Process Gas Chromatographs and Gas Analyzers are utilized for Total ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1115i Synchronized Multi-Port Sampling System utilizes the advanced capabilities of the Model 2537X Mercury Vapor Analyzer to conditionally control up to eight separate valve input/output ports. The 1100i can be configured to automatically sample eight separate input ports. With the 1115i valves can be triggered based on a pre-set activation time, a pre-set delay interval, the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Incl. pressure regulator and gauge, particle filters to remove solid and oil particles from the dilution air and a membrane dryer for water ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Standard CEMS is a low cost emissions monitoring package designed to operate in a general purpose, environmentally controlled shelter or cabinet. The targeted markets are NOX reduction sites at Refining, Hydrocarbon Processing and Chemical Plants. The standard monitoring requirements are based on the US EPA 1990 Clean Air Act as detailed in 40 CFR-Part 60, as well as local and state ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas ...
-
PremiumManufactured by ENVEAbased in FRANCE
Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers superior metrological performances for the simultaneous multi-gas measurement of: NOx, SO2, CO, O2, residual H2O, CO2, CH4 and N2O (greenhouse gases). ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Based on NIR XDS technology, the NIRS XDS Process Analyzer belongs to the next generation of process analyzers for real-time analysis. Nondestructive, accurate measurements are performed wherever a product is moving, for instance, above a conveyor belt, web, or ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2060 Ion Chromatograph (IC) Process Analyzer from Metrohm Process Analytics is based on the modular 2060 platform concept. This modular architecture enables the separation of the cabinets in different locations around a plant and the connection to up to 20 sample streams for time-saving sequential analysis at multiple areas inside of a plant. ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
The Synspec Cooled Sample Conditioning Unit (Cooled-SCU) is developed for the effective removal of high concentrations of humidity from your sample gas. Heart of the instrument is a cooled loop that removes the humid from the sample gas. All internal tubing of the Cooled-SCU is made of inert materials, making this Cooled-SCU in particular suitable for the analysis of sulphur containing components ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Incl. pressure regulator and gauge, particle filters to remove solid and oil particles from the dilution air and a silica gel dryer or molecular sieve for water removal. Extra molecular sieve 1 kg for ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Liquid water is a loose matrix of water molecules. If water without oxygen comes into contact with a source of oxygen, such as the atmosphere, then oxygen will slowly move into the gaps in the water-molecule matrix. That oxygen is called dissolved oxygen (DO); it is the same thing as dissolving table salt in water. Oxygen dissolved in water comes from the atmosphere and/or photosynthetic ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Worldwide solutions for today's process analyzer needs. Todays challenges: specifying, building, installing, commissioning, and operating analytical measurement systems in today’s process plant. Now you’ve got more than just the process to measure. The job also includes air, water, and by-products that once were not considered worth measuring. Worldwide competition also means fewer ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The Dekati Axial Diluter is made of stainless steel which ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you