Sample Conditioning Equipment For Monitoring And Testing Near Tuvalu
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Electronic transmitter / controller for the measurement of the specific resistivity or specific conductivity in high purity ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Designed for pharmaceutical applications with 2 signal outputs and 2 contact relays. The USP alert can be selected as a percentage ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
The portable AMI INSPECTOR is a complete on-line monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, conductivity measurements in pharmaceutical ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
High precision, non-contact nephelometer based on ISO 7027 (EN 27027, DIN 38404) for the continuous measurement of turbidity in pure water, potable water, surface water treatment and ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Complete monitoring system for the automatic, continuous measurement of the specific resistivity / specific conductivity in high purity ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Flow cell for the Swansensor Oxysafe1000. Flow cell made of PVC and acrylic glass with one M40 x 1.5 sensor opening, sensor incident flow tube. Suitable for Ø 32 mm sensors with M40 adapter, e.g. SS Oxysafe1000. Removable transparent vessel allows easy sensor calibration and ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Colorimetric process analyzer for the automatic, continuous measurement of phosphate. Measuring range: 0.01 to 10 ppm (mg/L) PO4. Based on colorimetric measurement principle according to ISO 6878. Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers. No interferences with silica. Control of sample ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Sampling accessory to regulate flow with pressure reducing valve including flow measurement. Pressure reducing valve (0-4 bar), maximum inlet pressure 10bar. Flowmeter made of Acrylglas with capillary tube including SWAN Flowmeter (Hallsensor) with 1m cable length. Sample in- and outlets with female threads ⅛' for Serto 8 mm ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
The portable AMI INSPECTOR is a complete monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, resistivity process ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Monitor for continuous measurement of Ammonium, Nitrate or Fluoride in potable water. Complete system mounted on PVC panel: Transmitter AMI ISE Universal in a rugged aluminum enclosure (IP 66). Flow cell M-Flow 10-3PG with temperature sensor (NT5k). Factory tested and calibrated. Ready for installation and ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Monitor for continuous measurement of pH or redox (ORP) in potable water and effluents. Complete system mounted on PVC panel: Transmitter AMI pH-Redox in a rugged aluminum enclosure (IP 66). Flow cell M-Flow 10-3PG with temperature sensor (Pt1000). Factory tested and calibrated. Ready for installation and ...
-
Manufactured by DEWESoftbased in SLOVENIA
Very robust DAQ systems with IP67 degree of protection, operating temperature between -40°C up to +85°C and high shock protection provide a very reliable solution for testing in the extremely harsh ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in pre-combustion and flue gas applications and provide air/fuel ratio ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Establishing a new standard for clean gas moisture analyzers, the 2850 provides exceptional performance, with virtually no interferences, multi-gas compatibility, and on-board measurement verification. The 2850 uses the most accurate trace moisture measurement technology available to deliver an ultrafast response to both increasing and decreasing moisture ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Housed in an explosion-proof package, the 932 is a multi-component ultraviolet (UV) photometric gas analyzer which measures up to five gas species at the same time. Hydrogen sulfide (H2S) and sulfur dioxide (SO2) are the primary measured components. The analyzer can also be configured to measure carbonyl sulfide (COS) and/or carbon disulfide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The IPS-4 is a cost-effective, low maintenance photometric spectrometer with the ability to measure up to eight analytes in a gas or liquid phase sample. Available in UV-VIS, NDIR and IR/UV platforms, it provides a fully integrated sample conditioning system for easy maintenance. The IPS-4 has an IP65enclosure and is durable enough for use in harsh ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using x-ray-transmission analysis techniques, the 682T-HP has been developed as a fast, sensitive and compact solution for on-line monitoring of the sulfur content in highly viscous hydrocarbons. The 682T-HP is not just a sulfur analyzer, but a fully integrated system. Process pressure, temperature and density can be continuously monitored, ensuring accurate measurements even as process ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Adapted from our 931/932 ultraviolet (UV) analyzer platform, the 934 sensor-specific analyzer measures hydrogen (H2) in tail gas treating unit (TGTU) applications when hydrogen sulfide (H2S) measurements are not needed. With a rugged, low-maintenance design and minimal calibration drift, the analyzer uses a thermal conductivity detector (TCD) to deliver accurate H2 measurements while requiring ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Ion-selective Memosens sensor for the wastewater industry. ISEmax CAS40D is the right technology for trend measurement directly in the basin. It helps you to increase the efficiency and reduce the energy costs of your aeration processes. The sensor works without reagents saving you even further money. With its robust ion-selective membranes and excellent self-cleaning, it eases your maintenance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Products for high-precision sum parameter analysis in municipal and industrial wastewater treatment. TOC, COD and SAC analyzers are used to assess the organic load of surface water, municipal wastewater and industrial wastewater. They measure total organic carbon, chemical oxygen demand and spectral absorption coefficient. Measurement in the outlet ensures compliance with regulatory requirements. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you