Sample Dilution Equipment For Monitoring And Testing Near Newfoundland
-
Manufactured by Beckman Coulter, Inc.based in USA
Covering all of the applications of a floor-standing centrifuge, the Avanti JXN-30 features rotor speed of 30,000 RPM and RCF greater than 100,000 x g. Master daily lab challenges with the advanced levels of networking, reliable performance, and improved BioSafety* found in the Avanti JXN-30. The additional power of the MobileFuge app gives additional flexibility, including the ability to: Access ...
-
Manufactured by Rudolph Research Analyticalbased in USA
The refractometer ARAGO is dedicated to fluid refractive index measurements. The refractive index is the ratio between the speed of light radiation in a vacuum and its speed in the sample medium. It depends on several parameters, in particular the temperature and the sample composition. The measurement of the refractive index is in general used in industrial process control to determine the ...
-
Manufactured by Focus Laboratories Inc.based in USA
10 gm of sample is diluted with a pH balanced, isotonic diluent, usually supplemented with chemical neutralizers for any antimicrobial agents which might be present in the drug product, and further homogenized by shaking, stomaching, vortexing or other ...
-
Manufactured by Grant Instruments (Cambridge) Ltdbased in UNITED KINGDOM
The Grant bio PCH-1/PCH-2 personal benchtop cooler/heaters are ideal for laboratory applications requiring cooling and heating in microtubes within the temperature setting range of - 10°C to +100°C. The PCH cooler/heaters enable a stable temperature to be maintained during room temperature ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
Highly advanced on-line TOC Analyzer excels in a wide range of applications. The TOC-4200 on-line TOC analyzer is based on the EPA approved 680°C High Temperature Catalytic Oxidation Method SM 5310B. This established method is recognized worldwide as the most reliable, and efficient TOC analysis technique and is particularly well suited to complex matrices such as wastewater and ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
Shimadzu has long been advancing the analytical performance of HPLC systems. At the same time, we recognize that overall efficiency depends not only on the performance of one instrument, but on the management of all devices within a lab. This realization leads us to now, a time in which AI capabilities have been incorporated to allow devices to detect and resolve issues automatically. In ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
Every i-Series has a touch-screen LCD display for easy, intuitive system control and chromatogram viewing, built-in degassing, quaternary solvent delivery, autosampler and UV or PDA detector. As always, sample injections are the fastest around (< 14 seconds), with ultra-low carryover. Providing the Ultimate Balance of High-Level Performance and Ease-of-Use in an Integrated ...
-
Manufactured by Cemtek KVB-Enertecbased in USA
Cemtek offers custom-built dilution extractive CEMS manufactured to your application's unique specifications. Our technicians will work one-on-one with you to design, engineer, construct, deliver, and install your tailor-made product. Dilution extractive systems are very well suited for harsh applications where high levels of gases, acids, moisture, and pollutants are ...
-
Manufactured by Molecular Devices, LLC.based in USA
The SpectraMax L Microplate Reader measures flash and glow luminescence assays in both 96- and 384-well plates. It is upgradeable to include a barcode reader, programmable injectors, and dual-channel configurations for a 2-fold increase for medium throughput. The high sensitivity, low-noise photomultiplier tubes (PMTs), and variable-volume injector configuration make this reader ideal for fast ...
-
Manufactured by Waters Corporationbased in USA
Easily More Sensitive, Just Turn the Key. With an ionKey/MS System, Waters transforms what your lab can do. By integrating the UPLC separation into the source of the mass spectrometer ionKey/MS gives you: Increased sensitivity, Simplified user experience, The power to perform multiple analyses on limited sample volumes, The power to analyze smaller sample sizes, Reduced solvent ...
-
Manufactured by Hach - Veraltobased in USA
Chloride, Single Parameter Test Kit, Model: 8-P, Drop count titration/Silver nitrate. Found in nearly all natural waters, chloride affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. Test kits use either silver or mercuric nitrate titrant. The model CD-DT (p/n-2063500), a multi-range kit, is supplied with the ...
-
Manufactured by Waters Corporationbased in USA
One system. Every analyte. All the time. Demands on analytical laboratories are changing and every laboratory needs to ensure it can keep pace with these ...
-
Manufactured by Agilent Technologies, Inc.based in USA
The Solution-Ready Agilent 7800 ICP-MS combines proven, robust hardware, auto-optimization tools, and Pre-set Methods to simplify routine analysis. With high matrix tolerance, wide dynamic range, and effective control of polyatomic interferences, the hardware takes the uncertainty out of analyzing complex or variable sample matrices. The 7800 ICP-MS is extraordinarily easy to set up and use, so ...
-
Manufactured by Hach - Veraltobased in USA
Chloride, Single Parameter Test Kit, Model: CD-51, Drop count titration/Silver nitrate. Found in nearly all natural waters, chloride affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. Test kits use either silver or mercuric nitrate titrant. The model CD-DT (p/n-2063500), a multi-range kit, is supplied with the ...
-
Manufactured by PerkinElmer, Inc.based in USA
The LPC 500 Liquid Particle Counter is a single particle optical sizing (SPOS) system designed to count and size particles individually with high resolution. When used for in-service oil samples, only 4 mL of 10x diluted samples are typically needed, offering reproducible results between high- and low-viscosity samples, while also minimizing washout requirements and solvent ...
-
Manufactured by Hach - Veraltobased in USA
Chloride, Single Parameter Test Kit, Model: CD-51, Drop count titration/Silver nitrate. Found in nearly all natural waters, chloride affects human taste above 250 mg/L. High levels inhibit plant growth, and many industrial processes need to limit chloride concentration. Test kits use either silver or mercuric nitrate titrant. The model CD-DT (p/n-2063500), a multi-range kit, is supplied with the ...
-
Manufactured by Durridge Company, Inc.based in USA
The RAD H2O is an accessory for the RAD7 that enables you to measure radon in water over a concentration range of from less than 10 pCi/L to greater than 400,000 pCi/L. By diluting your sample, or by waiting for sample decay, you can extend the upper range to any ...
-
Manufactured by Interscan Corporationbased in USA
The Dilution System [flow diagram] operates by mixing the sample to be analyzed (the analyte) with diluent purified air or nitrogen. The optimal flow rates for both the analyte and diluent are determined based on the particular application, and are monitored and controlled at integral ...
-
Manufactured by Ohio Lumexbased in USA
Used as an attachment for the RA-915M, the RP-92 provides a unique method for determining mercury concentrations in liquid samples such as water, blood and urine for environmental monitoring, technological process controls, medicine and other scientific research. The RP-92 attachment is a generator of mercury vapor which is produced by reducing Hg (II) into its elemental form using the cold vapor ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. The sample injection method is used in this 190 deg.C heated sample diluter for fast response and improved zero and span stability of a hydrocarbon measurements. The Model 108 is also ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you