Sample Filtration Applications available in New Jersey
-
Premium
Laboratory instruments solutions for environmental industry
The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Flame Photometer for Measurement of Potassium and Sodium in Meat
Several different techniques can be used for sample digestion and extraction of sodium and/or potassium: oven ashing, perchloric acid ashing, extraction by boiling and acidification with HNO3 as well as extraction by homogenisation in 2% trichloroacetic acid (TCA). ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Flame Photometer for Measurement of Lithium Sea Water
The effect of potential interference from other constituents of sea water was studied, including sodium, chloride and potassium. It was found that pre-concentration of the sea water was not necessary prior to analysis. A filtration of the sample was only necessary if sample contained suspended material. ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Continuous Emissions Monitoring System (CEMS) for Determination of a Gas
Continuous emission monitoring system (CEMS) is the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission and transmit the information to the Continuous Emission Monitoring system. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Determination of acetic acid (acetate anions) in natural, drinking, and waste water
Introduction The method is used for the determination of acetic acid (as acetate ions) in the samples of natural water, drinking water, and waste water by capillary ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Flame Photometer for Measurement of Sodium and Potassium in Dried Milk
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Particulate Monitoring
The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Ambient Air Monitoring
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. Air quality monitoring efforts are usually driven by governmental regulation, but may also be motivated by a neighborhood concern or scientific interest. These measurements are performed by researchers in industries or institutions, but they may also be performed by local advocacy groups. When combined with other information (such as weather data, ...
By TSI Incorporated based in Shoreview, MINNESOTA (USA).
-
Microbial testing for chemical products industry
On-the-spot measurement for microbial risk management! Microbial growth in industrial chemicals can present a major problem.· If left unchecked, microbial contamination in raw materials and intermediate products can compromise manufacturing process performance and equipment integrity.· These same sources can also impact final product quality, which if not properly maintained can spoil products while sitting on the shelf.· The best solution is early, accurate detection and proactive ...
By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).
-
Air Quality Monitoring Equipment for Sample Handling Industry
Within the field of gas analysis much time is spent looking at the accuracy and uncertainty in the detection technique. However, without appropriate sample handling, what you are measuring could potentially bear little or no relation to your original ...
By Signal Group Ltd based in Camberley, UNITED KINGDOM.
-
Independent particle characterization services for environmental industries
Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge ...
By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).
-
Radionuclide Monitoring for Nuclear Power Plants
The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant's radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to ...
By Acoem Australasia based in Knoxfield, AUSTRALIA.
-
Sunset Lab Performance Evaluation Samples
Sunset Lab Performance Evaluation Samples (PES) are quartz filters with carbonaceous aerosol deposits prepared under controlled laboratory conditions with analytical grade materials and methods. Integrating PES filters into QA/QC practices will provide carbonaceous aerosol instrument laboratories with a simple and precise tool for evaluating carbon analyzer performance and the validation of Organic, Elemental and Total Carbon (OCEC) ...
By Sunset Laboratory Inc. based in Tigard, OREGON (USA).
-
Measurement solution for HF emissions from brickworks
Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Monitoring engineering systems for wastewater treatment industry
Sometimes an 'off the shelf' water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
Sample preparation and pumping systems for wastewater treatment industry
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
Stack Emission Sampling for Heavy Metal Sampling System
This method is dedicated to the sampling of discharged heavy metals in emissions coming from hazardous city waste incinerators. The elements analyzed are: Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper,Magnesium,Nickel, Lead, and Thallium. This method is applicable to each one of these specific elements in the concentration range of 0.005 mg/m3 to 0.5 mg/m3. ...
By AMS Analitica based in Pesaro, ITALY.
-
Industrial vacuum filtration solutions for general purpose process sector
Peterson Filters’ experience spans a number of products involving liquid-solid separation. From its beginnings in the metallurgical industry, our vacuum filter products have been applied in many processes including those in the chemical and food ...
By Peterson Filters Corporation based in Salt Lake City, UTAH (USA).
-
Stack Emission Sampling for Mercury Sampling System
Mercury sampling system compliant with UNI EN 13211 normative. This method is focused on discharged mercury in emission coming from hazardous city waste incinerators. The method is applicable in the concentration range of 0.001 mg/m3 to 0.5 mg/m3. ...
By AMS Analitica based in Pesaro, ITALY.
-
Stack Emission Sampling for Emission Dust Sampling Options
The reference EN 13284-1 provide two different way about stack sampling, depending on emission conditions. The first option provide sampling with a standard probe with inserted perpendicularly into the duct filter holder to the emission flow. This option is recommended for emissions not involving humidity and with low temperature. It allows using non-perpendicular filter holders to sampling flow, reminding to consider also as part of the sampling all the collected parts ahead of the ...
By AMS Analitica based in Pesaro, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you