Sample Filtration Equipment For Monitoring And Testing Available In Marshall Islands
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Complementary and robust. If you perform acid hydrolysis as a sample preparation step for total fat determination, discover HydrolEx H-506 as a complementary and robust addition to your FatExtractor E-500 or UniversalExtractor E-800. Benefit from a smooth, safe process with convenient system ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Complete flow control of ultrapure water through a liquid particle counter is critical to ensure accurate and actionable data. Particle Measuring Systems (PMS) offers the new FC-200 and FC-100 series of pressure balancing flow controllers as the perfect complement to our high precision liquid particle counters. The FC-100 automatically adjusts to pressure changes within the particle counting ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 47 mm or 50 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Filter Holder Plastic Combination, In-Line, 47 mm particulate – Model C; 3/8″ ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Plastic Combination, Open-Face,. 47mm particulate, 3/8″ FPT.. for use with F&J Model M (metal ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Filter Holder Plastic Combination, Open-Face, 2.0″ particulate – for use with F&J Model M (metal can); 1.83″ ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Aluminum Particulate 3/8” FNPT. Open-face 47 mm twist ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
10 micron high capacity groundwater filter each. The SingleSample® High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. Approximately 600 cm² of surface ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample pressurized disposable bailer system is designed to provide an easy method for filtering metal samples in the field. The pressurized bailer's rugged HDPE construction permits use for both bailing and sampling wells while eliminating cross contamination and decon time. 36" overall length, 1.5" ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
This SB-8-47 modular sample case, modified for use with the SB-47 heated filter oven, secures the probe and impinger case in a rigid manner. The sample frame is made of durable powder-coated aluminum with a stainless steel probe clamp and impinger case ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
1.5" Pressure Bailer VOC tip 12 units per box. The SingleSample® pressurized disposable bailer system is designed to provide an easy method for filtering metal samples in the field. The pressurized bailer's rugged polyethylene construction permits use for both bailing and sampling wells while eliminating cross contamination and decon time. 36" overall length, 1.5" ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Aluminum, combination, open face, filter holder for 60 mm diameter filter paper and CHC-50 Cartridge, 3/8″ ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Due to the variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be “The Ideal External Battery Operated Air Sampler”. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permit-ting longer sampling times on a single battery charge. For higher maximum flow rates, with minimal Amp draw, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The Sample Analysis System (consisting of MK- 30P shielded chamber and connected PC/notebook) is intended for measuring swipe (smear) and evaporated samples and air filters. Various detectors can be used for specific applications: alpha, beta, gamma, alpha/beta, etc. Measuring dish diameter: max 50 mm (2 in). ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas resistance; high precision temperature control, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Filter Holder, Plastic. Combination, Open-Face, 47MM. Particulate-Model B; 1.83” ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Aluminum In-Line particulate; 47mm, with 3/8″ ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Stainless Steel Combination, In-Line, 47mm particulate, 3/8″ FPT for use with F&J Model M (metal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you