Sample Handling Equipment For Monitoring And Testing Near Virginia
-
Manufactured by AMETEK Process Instrumentsbased in USA
Adapted from our 931/932 ultraviolet (UV) analyzer platform, the 934 sensor-specific analyzer measures hydrogen (H2) in tail gas treating unit (TGTU) applications when hydrogen sulfide (H2S) measurements are not needed. With a rugged, low-maintenance design and minimal calibration drift, the analyzer uses a thermal conductivity detector (TCD) to deliver accurate H2 measurements while requiring ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using tunable diode laser absorption spectroscopy (TDLAS) technology, the 5100HD can be configured with one or two absorption cells, providing dual stream analysis and/or the measurement of multiple analytes at the same time. The tunable diode laser technique is inherently free from many problems that affect physical contact sensors, including repeated exposure to contaminants and a delayed ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 919 is a fully extractive hot-wet gas analyzer, providing a complete monitoring system with sample extraction and transport, designed to maintain sample integrity. Developed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective way, it delivers high reliability and reduced maintenance, with no moving ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and nitric ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The IPS-4 is a cost-effective, low maintenance photometric spectrometer with the ability to measure up to eight analytes in a gas or liquid phase sample. Available in UV-VIS, NDIR and IR/UV platforms, it provides a fully integrated sample conditioning system for easy maintenance. The IPS-4 has an IP65enclosure and is durable enough for use in harsh ...
-
Manufactured by Yamato Scientific America Inc.based in USA
High performance, easy operation and ergonomically designed sterilizers featuring easy top loading and handling of ...
-
Manufactured by Yamato Scientific America Inc.based in USA
High performance, easy operation and ergonomically designed sterilizers featuring easy top loading and handling of ...
-
Manufactured by Vitl Life Science Solutionsbased in USA
Maximise lab space and flexibility with our compact programmable dry block heater, Flexi-therm. When coupled with our range of intelligent, intuitive and interchangeable Heated Modules, the Flexi-therm provides highly accurate, repeatable sample heating for a range of laboratory consumables including microplates and various tube formats. The Flexi-therm combines superb temperature control and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston rod with detachable handle for sample tube 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Handle, normal, 60 cm, bay. (incl. coupling ...
-
Manufactured by CTC Analytics AGbased in SWITZERLAND
Automation is the way to increase productivity and (process) safety in the laboratory. Transferring repetitive or dangerous manual tasks to a robot improves safety. The possibility to run the PAL RTC with Robotic Tool Change unattended 24h/day increases throughput, especially for long sample ...
-
Manufactured by LEAP Technologies by Trajan Scientific and Medicalbased in USA
This accessory for the COMBI PAL can be used for SPME or Headspace out of Tedlar Bags. The tray can hold up to 15 bags and can be accessed in any order. A Tedlar Bag can be an alternative sampling container for air VOC analysis Tedlar Bags are made from a special DuPont material PVF film with a PEF-coated septa to keep the gas sample stable and leak ...
-
Manufactured by LEAP Technologies by Trajan Scientific and Medicalbased in USA
A binary UHPLC pump in a compact housing. LEAP's many years of experience selling, supporting and integrating UHPLC and HPLC pumps in the LC-MS lab forms the knowledge base to deliver this superb product. This cost-effective package runs on LEAP's own fully integrated Analyst pump driver. The Gazelle 18 can be sold as an upgrade path for researchers with PAL systems or as a Bundle with an HTS or ...
-
Manufactured by LEAP Technologies by Trajan Scientific and Medicalbased in USA
The PAL3 System is one of the most widely used and successful sample preparation and handling ...
-
Manufactured by LEAP Technologies by Trajan Scientific and Medicalbased in USA
The Gazelle 18 pump is a binary UHPLC pump in a compact housing. LEAP's many years of experience selling, supporting and integrating UHPLC and HPLC pumps in the LC-MS lab forms the knowledge base to deliver this superb product. This cost-effective package runs on LEAP's own fully integrated Analyst pump driver. The Gazelle 18 can be sold as an upgrade path for researchers with PAL systems or as a ...
-
Manufactured by Midac Corporationbased in USA
The Titan-OL is a turnkey, process-ready gas analysis system. The analyzer and sample handling hardware can be wall or frame mounted in a NEMA enclosure suitable for use in production environments, including Class I, Div. 1. The integrated sampling system is fully purgeable and can handle multiple sample and reference lines. The Titan-OL is equipped with an industrial computer system. Analyzer ...
-
Manufactured by Cobalt Light Systemsbased in UNITED KINGDOM
The Agilent 7000D Triple Quadrupole GC/MS is the latest model of the most successful GC/MS/MS in history. The right choice for most applications, the 7000D is the fourth-generation version of the GC/TQ used by agencies around the world to create and validate many now-standard GC/MS/MS methods. The 7000D Triple Quadrupole GC/MS incorporates a range of features such as the MRM Optimizer tool and ...
-
Manufactured by Cobalt Light Systemsbased in UNITED KINGDOM
The RapID system is the next generation in portable Raman raw materials ID verification, extending high-throughput spectroscopic analysis through clear packaging to nontransparent and colored containers. ID testing of materials in opaque containers can create a bottleneck in pharmaceutical manufacturing. A dedicated sampling area is needed to open, sample, test and re-seal each container to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you