Sample Heating Equipment For Monitoring And Testing Near Vanuatu
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The 10.547 has replaced its well-established and successful predecessor 10.537 offline sampling system. The unit is semi-portable so it can be easily transported between sample points or moved to test different locations. It can also be installed on a permanent basis by mounting to a wall or free standing frame. It may also be put into a 19 inch rack cabinet for additional environment protection ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The P S Analytical range of mercury continuous emissions monitors (CEMs) is designed to handle all types of industrial and research applications. The CEM is based on modules (click here) which allow the systems be customised to specific user requirements. The majority of CEMs fall into three broad categories which can be summarised as general purpose, dedicated monitoring or compact instruments. ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The ECOTECH Air Sampling System is designed to meet International Standards (including US EPA Quality Assurance Standards) for the continuous sampling of ambient air. Its robust design is suitable for most ambient air gas sampling applications, and all surfaces in contact with the sample air are made with glass or Teflon, including a Teflon raincap which prevents rain entering the ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
We offer a complete solution for continuous emission monitoring, utilising the extractive dilution monitoring method. With over 30 years of experience in the design, construction, installation, commissioning and maintenance of Continuous Emission Monitoring Systems (CEMS), you can rely on us for your CEMS ...
-
based in AUSTRALIA
The Membrane Interface Probe (MIP) is a High-Resolution Vertical Mapping tool which Numac offers to detect in real time subsurface contamination for environmental site assessments and characterizations, specifically volatile organic compounds (VOCs) such as halogenated solvents, petroleum compounds, and methane.The MIP is a multipurpose tool for mapping soil and groundwater contamination, ...
-
Manufactured by PIKE Technologiesbased in USA
The Heated Gas Flow Cell is recommended for high-performance FTIR sampling of flowing gas samples. The beam conforming design of the cell provides for minimum cell volume, maximum throughput, and a 100 mm pathlength. The gas cell may be heated up to 300 °C to prevent condensation of ghier molecular weight gas ...
-
PremiumManufactured by ENVEAbased in FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by ENVEAbased in FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient temperature, in order to eliminate all condensation issues (water ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed to meet ...
-
PremiumManufactured by ENVEAbased in FRANCE
Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements. Exist in 2 different versions: TOPAZE 52M-S : NO or NOx monitoring. TOPAZE 52M-D : NO-NOx and NO2 simultaneous ...
-
PremiumManufactured by ENVEAbased in FRANCE
FTIR analyzer in a turnkey cabinet for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, O2… ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The Ankersmid digital gas conditioning system is a compact, • low-maintenance, self-monitoring and completely equipped units is suitable for variable and continuous operation in most ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most applications up to 1g dust/m3 can be integrated. 180mm filters with a larger filter surface are used for applications up to 4g dust/m3; with the blow- back ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other solutions. The heated sample line is to be mounted at the gas measuring inlet terminal inside the portable case. ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The probe type ASP 320 is based on the standard Ankersmid sample probe. Due to its modular and innovative design the Ankersmid heated sample probe cover also meet the special requirements of above mentioned ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you