Only show results in Virginia? Ok

Sample Preparation Applications

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine production in Europe alone. As a result of this, yearly waste outputs contain around 1200 tons of mercury, which are stored on-site or sent off for disposal.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Early Warning Systems for Drinking water

    Drinking water supply and distribution systems around the world (a critical and interdependent component of a nation’s infrastructure) are vulnerable to both intentional and accidental contamination. Unusual water quality may serve as a warning of potential contamination. The available physico-chemical sensors utilize general water quality parameters, such as free chlorine, oxidation reduction potential (ORP), total organic carbon (TOC), turbidity, pH, dissolved oxygen, chloride, ammonia, nitrate to detect the contamination. Generally, one or more of these water quality parameters will change due to the injection of a contaminant. However, no single chemical sensor responds to all possible contaminants nor can they give any indication of the potential toxicity of complex mixtures.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    PTR-MS systems for medical sector

    PTR-MS are powerful tools for non-invasive, real-time breath gas analysis with many applications, such as screening for disease markers, study of pharmacokinetics or metabolic processes.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    PTR-MS systems for biological research

    Real-time measurement of plant defense and leaf wounding reactions. Measurement of VOCs in dynamic biological systems with low detection limit and without sample preparation.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Substitute fuel sampling system

    A critical eye for every sample! Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Fire detection solutions for the power stations sector

    One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital equipment.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Laboratory instruments solutions for food and beverage industry

    Today’s food and beverages (F&B) are much more than just simple "organic fuels" needed for survival. Beyond their nutritive value, they are consumed for their taste or flavor. Increasingly, they are also a source for maintaining health and enhancing our well-being via high-quality nutrition. At the same time, with an ever-increasing number of processed foods, food quality and safety aspects are becoming more important. All the more because foods are highly complex materials – prone to degradation and contamination – that contain myriads of compounds.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Application package FLUXANA Ash

    This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench. It can for example contain all parts to perform a complete ash analysis: - Calibration set ash prepared from CRM and primary oxides as glass beads - Calibration work performed by FLUXANA expert 3 days on site - 3x drift monitors for xrf instrument - 7x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. If you combine our application packages with our sample preparation machines we guarantee the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Application package FLUXANA Cement

    This application package is a 'ready to go' calibration kit for xrf instruments. It can, for example, contain all parts to perform a complete cement calibration: - Calibration set cement prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Application package FLUXANA Silicon Carbide

    This application package is a 'ready to go' calibration kit for xrf instruments. It can, for example, contain all parts to perform a complete cement calibration: - Calibration set prepared from CRM as glass beads 40mm - Calibration work performed by FLUXANA expert on site - drift monitors for xrf instrument - control samples for validation - Flux FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    EDXRF spectrometers for pharmaceutical industry

    The pharmaceutical industry is one of the most regulated industries. Contaminants in drug products are examined throughout the manufacturing process, since their presence affects drug stability, behaviour and toxicity. Therefore, regulatory bodies such as the European Medicines Agency (EMEA) and the American Food and Drug Administration (FDA) strictly enforce continuous and ongoing analysis of organic or inorganic impurities from raw materials, excipients and Active Pharmaceutical Ingredients (API) through intermediates of drug products and packaging.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Gas analysis & monitoring system for gas purity

    The purity of a gas is an indication of the amount of other gases contained in it. A high purity refers to a low amount of other gases. High purity gas are considered to be of better quality and are generally more expensive. The purity of the gas can be expressed as a percentage or as a decimal fraction. Applications for checking the purity of the gases across different industrial sectors by air separation plants, cryogenic facilities, the quality control of industrial gases to the steel mills, etc.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Direct atomic absorption mercury determination in foodstuff and mixed feed

    Direct atomic absorption mercury determination (without any pre-treatment procedures) in food is complicated by its organics matrix. That is the reason why almost all AAS methods of mercury determination in foodstuff include sample digestion by acids.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • XRF analysis for metals exploration & mining

    Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • XRF analysis for WEEE compliance & RoHS

    Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Chromatography systems for food industries

    Food samples exhibit a challenge to analytical chemists to determine pesticide residues to meet food safety regulations in USA and EU. Therefore, more careful sample preparation is needed to successfully identify and quantify these compounds in food. Dikma offers SPE columns with different absorbent phases and QuEChERS method for sample pre-treament.

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA).

  • Filtration systems & solutions for biosciences and scientific industry

    The scientific community and in particular for that of the life science industries such as the medical, pharmaceutical  and healthcare, have a growing need for superior technologies and products in filtration, separation, purification, aeration and liquid transfer. The range of BioVyon materials and applications are continuously expanding, driven by new market requirements and available to both OEM and end user customers. Applications include separation or filtration for healthcare, medical and pharmaceutical products, shut off valves for catheters, diagnostic wick and sample preparation devices.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in air. We investigated the performance of the LC-MS and LC-MS-MS methods in the analysis of isocyanates using the new ASSET™ EZ4-NCO Dry Sampler. We found that the analytical method can successfully reach the quantitation limit for most isocyanates of 5 ng/mL in the final sample when LC-MS-MS analysis was used and the quantitation limit of 10 ng/mL when LC-MS analysis was used. All 11 compounds were well-resolved chromatographically using a 15 cm Ascentis Express C18 column.

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

  • Improved Reproducibility and Reduced Sample Preparation Time for the HPLC Analysis of Aflatoxins in Raw Peanut Paste

    The US FDA and international regulatory agencies have set contamination levels for aflatoxins in animal feedstuffs. Since Aspergillus may infect commodities pre-harvest, during storage or during processing, monitoring for aflatoxins in associated agricultural commodities at all stages of production is requisite. Field screening methods exist that are adequate to estimate contamination levels for aflatoxins. When additional confirmation or quantification is desired, chromatographic laboratory analysis is often necessary. Preparation of matrix samples prior to chromatographic analysis typically requires extraction and purification. Commonly, immunoaffinity columns (IAC), which employ a multi-step bind and elute mechanism to concentrate and purify aflatoxins, are used to purify matrix samples for subsequent analysis. Solid phase extraction (SPE), an alternate method which may use interference removal, can also be employed.

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you