Sample Preparation Procedure (Sample Preparation) Equipment
-
Manufactured by Vicam, A Waters Businessbased in USA
Afla-V strip tests utilize the proven sensitivity and selectivity of VICAM’s monoclonal antibodies to accurately detect and measure total aflatoxins B1, B2, G1, and G2 at levels as low as 2 ppb and as high as 100 ppb. The single dilution sample preparation procedure saves time and materials, and the test takes 5 minutes* to develop. ...
-
Manufactured by Vicam, A Waters Businessbased in USA
Fumo-V test strips use the proven sensitivity and selectivity of VICAM’s monoclonal antibodies to accurately detect and measure total fumonisin B1, B2, and B3 at levels as low as 0.2 ppm and as high as 10 ppm. The single dilution sample preparation procedure saves time and materials, and the test strip develops in just 5 minutes.* ...
-
Manufactured by Vicam, A Waters Businessbased in USA
Ochra-V test strips use the proven sensitivity and selectivity of VICAM’s monoclonal antibodies to accurately detect and quantify ochratoxin A in wheat and coffee samples at levels as low as 2 ppb. The single dilution sample preparation procedure saves time and materials, and the test takes 7 minutes* to develop. Digital ...
-
Manufactured by HTA s.r.l.based in ITALY
HT4000A allows automation of sample preparation procedures in order to increase lab productivity, improve repeatability and traceability, operator’s health and lower safety risks and reduce crosslab CV by increasing method ...
-
Manufactured by Hema Scientific Instrumentsbased in INDIA
In some applications, a cold water source is enough to keep your condensers cool during routine sample preparation procedures. As the solvent vapor comes in contact with the cooled condensers, the solvent becomes a liquid, allowing the solvent to be collected. However, depending on the testing performed in your laboratory, a ...
-
Manufactured by La Tecnocarta srlbased in ITALY
Syringe filters are vital to laboratory activities, particularly for HPLC and GC procedures, sample preparations and microbiological investigations. The membranes are available in a wide variety of materials (PA, PE, PP, PS, PTFE, PVDF, CA, CM, CN and GF) and pore sizes (from 0,2 μm to 5 μm), but they all have in common a superior ...
-
Manufactured by LCGC Bioanalytic Solutions Llpbased in INDIA
The correct food/feed sample preparation and grinding procedure is the basis for a good accuracy and reproducibility of the final analysis results. Its great importance is well-known by all lab operators. The new Deimos samples homogenizer has been projected to satisfy the highest needs of the laboratories which usually analyze ...
-
based in USA
Identify ionic salts in seconds with minimal sample preparation. The Thermo Scientific portable IonicX XRF Analyzer provides fast and accurate ionic salt raw material identity verification and high sample throughput to pharmaceutical and biopharmaceutical manufacturers. Cut testing time and expense by replacing time-consuming, ...
-
Manufactured by Agilent Technologies, Inc.based in USA
at least 20 times as many ions as the previous generation, improving the efficiency of the entire workflow. Significant streamlining of sample prep procedures and reduction of sample injection volume for reduced routine maintenance requirements are just two of the ways the improved sensitivity of the 7010 can save time and money. Add in ...
-
Manufactured by Alliance Instruments GmbHbased in AUSTRIA
CFA is also known as Segmented Flow Analysis (SFA), to outline against FIA technique. Existing ISO standards define: 'Methods using flow analysis are automatizing wet chemical procedures and are therefore particularly suitable for processing large sample series... One differentiates between flow injection analysis (FIA) and continuous ...
-
Manufactured by HTA s.r.l.based in ITALY
For the same price of a conventional HPLC autosampler, you just get more; be ready to review your expectation about HPLC autosamplers! Enjoy the large sample capacity, the support for a wide range of sample vessels, the application versatility, the lab automation capabilities and the possibility to implement new modules and ...
-
Manufactured by gaiasafe GmbHbased in GERMANY
Passive collectors are impregnated fibre materials (paper) that are covered to prevent mechanically destruction. PC are able to absorb inorganic chemicals (all kinds of heavy metals except iron, half metals like arsenic (As), stibium (Sb) and selenium (Se), other metals like aluminium and chlorine). Absorption capacity is about 9% of total paper weight. PC are able to absorb organic compounds, ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Solvent evaporation/concentration is a critical step in the sample preparation process used by the clinical, food, environmental, pharmaceutical, chemical, and biotechnology industries. Because so many different types of samples and solvents are used for evaporation or concentration, no single technique can provide a universal solution. ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Solvent evaporation/concentration is a critical step in the sample preparation process used by the clinical, food, environmental, pharmaceutical, chemical, and biotechnology industries. Because so many different types of samples and solvents are used for evaporation or concentration, no single technique can provide a universal solution. ...
-
Manufactured by Alliance Instruments GmbHbased in AUSTRIA
The Loop-Flow Analysis was developed in the beginning of the nineties by our partner Systea. LFA is a new and patented technique to carry out colorimetric analysis procedures inside a hermetically closed Loop. Designed with a glance to sea water analysis on board of expeditions, LFA offers several specific advantages. The ...
-
Manufactured by LabTech S.r.l.based in ITALY
LabTech offers a complete range of DigiBlock digestion systems to fit any customer need. The DigiBlock heating surface is made of graphite or aluminum alloy protected by PTFE coating and can accommodate as many as 54 graduated tubes and operates from room temperature up to 450°C. The DigiBlock complies with the highest international standards to perform EPA approved methods. The DigiBlock use ...
-
Manufactured by Stable Micro Systems Ltdbased in UNITED KINGDOM
Discover where and how materials testing can be applied to measure the mechanical/physical properties of materials. Materials testing is a popular and well known field of measurement to obtain physical and mechanical properties of materials from powders or raw materials, components and composite finished products. It is a wide-ranging field offering force and distance (stress/strain) measurement ...
-
Manufactured by RECIPE Chemicals + Instruments GmbHbased in GERMANY
in patient samples. Basically these calibrators are prepared in the same manner as the patient samples during sample preparation; this way problems caused by matrix effects can be widely excluded. In contrast to the use of a directly injected matrix-free standard solution, systematic failures ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Solvent evaporation/concentration is a critical step in the sample preparation process used by the clinical, food, environmental, pharmaceutical, chemical, and biotechnology industries. Because so many different types of samples and solvents are used for evaporation or concentration, no single technique can provide a universal solution. ...
-
Manufactured by Efficiency Scientific Instrument Co., Ltd (ESI)based in CHINA
of complex materials. Whether the customer's sample is solid, alloy, powder, liquid or slurry, the EDX8800M MAX can easily achieve non-destructive qualitative and quantitative analysis of elements. Faster analysis speed, more accurate results, and more stable instrument performance make EDX8800M MAX one of the best tools for customers to perform ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you