Sample Splitting Equipment For Monitoring And Testing Available In American Samoa
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Ripple divider for manual bulk material division into two representative samples by alternating sequences. Sample can be repeatedly halved for ratios of 1/2n. The maximum feed grain size should be approx. 1/3 smaller than the cell width of the divider. For higher demands on dividing accuracy and function, the max. grain size should be max. 1/3 of the cell width. Ripple dividers can be used for ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The split barrel type sampling tubes are made of high-quality steel and feature an half open tip and sampling part. Excellent for rapid sampling in consistent soils, since its makes visual inspection of the samples easy and straightforward. The split barrel type sampling tubes can be pushed into the ground by means of a CPT penetrometer pushing rig, a DPT or SPT sounding rig or by means of ...
-
PremiumManufactured by AMS, Inc.based in USA
Use the AMS Split Soil Core Samplers to easily extract relatively undisturbed soil core samples. The split soil core sampler has a vertically split cylinder. You can use the split soil core sampler without a liner to collect relatively undisturbed soil cores for immediate field examination and testing. Or, it can be used with a liner for collection of relatively undisturbed, sealed soil core ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
New ASTM D8092 Standard Supports Direct Kinematic Viscosity Measurement. MiniVisc 3000 Series is a temperature controlled, portable kinematic viscometer. The MiniVisc 3000 series (formerly the SpectroVisc Q3000 Series) viscometers are the first truly portable, solvent-free, temperature-controlled kinematic viscometers, providing high-accuracy measurements for easy detection of viscosity ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as possible. Carbon ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for RCRA, CERCLA, UST, and Brownfield site assessments and ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Split Umbilical Cables are designed for added versatility for use in rigid and flexible configurations. They are constructed with the sample line and exit thermocouple split to the specified length. Split umbilicals are used in flexible systems where the filter compartment is separated from the impinger box with a flexible sample line as in Method 17, Flexible Method 5 and Compact Method 5 ...
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
The Omnifit range of 'Cap-type' connectors is a versatile system for connecting different types of hardwall tubing such as PTFE, instantly. These valved versions can be used for sampling, flow-splitting, mixing and fluid line interconnection. Tubing sizes between 0.5 and 11mm OD can be connected using either Viton seals or PTFE ...
-
Manufactured by Utestbased in TURKEY
UTA-0320 Large Capacity Sample Splitter is used for splitting aggregate samples. Slot widths are adjustable from 12,5 mm to 100 mm and the splitter is equipped with 25 channels with a 20 lt. hopper ...
-
Manufactured by Ocean Instruments, Inc.based in USA
Folsom splitter is a well known device for sub-sampling by splitting developed by Dr. Folsom of the Scripps Institution of Oceanography. A measured volume of plankton sample is placed in the undivided section of the drum, rotated 12o degree to divide and the sample is stirred with a separating blade. Contents of one tray may be returned to the drum for further sub-dive; water may be added as ...
-
Manufactured by Gilson Company, Inc.based in USA
The Gilson Universal Splitters are the most versatile sample dividers available, assuring top accuracy and truly representative specimens when reducing bulk samples. Each Splitter features our exclusive, adjustable chute system and proprietary lever-release hopper. All Universal Splitters have a row of precision-machined aluminum bars to direct equal amounts of material to each side into sample ...
-
Manufactured by Angstrom Advanced Inc.based in USA
Brand-new microcomputer temperature control system of world advanced control technology. High accuracy of temperature control (optimum: ±0.05°C), high reliability and anti-interference.User control and operating parameters (including for detectors) are set up by the keyboard. Self-diagnosis system, power-fail protection, file storage and call, limited temperature setting. Accurate ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
The PRV range of Samplers and Splitters is of robust design suitable for the most arduous duties, within one moving part facilitating easy maintenance. Suitable for vertical installation within falling streams, the PRV can be supplied for Primary Sampling or Sample Splitting ...
-
Manufactured by Geotek Ltdbased in UNITED KINGDOM
Geotek’s standard Multi-Sensor Core Logger (MSCL-S) is recognised as a crucial step in many geological coring workflows, including those for palaeoclimate, mineral exploration, geometallurgy, oil and gas, nuclear or geotechnical. The MSCL-S operates by automatically moving core samples past a series of sensors. The MSCL-S benefits from a modular configuration allowing for a range of ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you