Sample Splitting Equipment For Monitoring And Testing Available In Ontario
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The split barrel type sampling tubes are made of high-quality steel and feature an half open tip and sampling part. Excellent for rapid sampling in consistent soils, since its makes visual inspection of the samples easy and straightforward. The split barrel type sampling tubes can be pushed into the ground by means of a CPT penetrometer pushing rig, a DPT or SPT sounding rig or by means of ...
-
PremiumManufactured by AMS, Inc.based in USA
Use the AMS Split Soil Core Samplers to easily extract relatively undisturbed soil core samples. The split soil core sampler has a vertically split cylinder. You can use the split soil core sampler without a liner to collect relatively undisturbed soil cores for immediate field examination and testing. Or, it can be used with a liner for collection of relatively undisturbed, sealed soil core ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Ripple divider for manual bulk material division into two representative samples by alternating sequences. Sample can be repeatedly halved for ratios of 1/2n. The maximum feed grain size should be approx. 1/3 smaller than the cell width of the divider. For higher demands on dividing accuracy and function, the max. grain size should be max. 1/3 of the cell width. Ripple dividers can be used for ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
New ASTM D8092 Standard Supports Direct Kinematic Viscosity Measurement. MiniVisc 3000 Series is a temperature controlled, portable kinematic viscometer. The MiniVisc 3000 series (formerly the SpectroVisc Q3000 Series) viscometers are the first truly portable, solvent-free, temperature-controlled kinematic viscometers, providing high-accuracy measurements for easy detection of viscosity ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Split Umbilical Cables are designed for added versatility for use in rigid and flexible configurations. They are constructed with the sample line and exit thermocouple split to the specified length. Split umbilicals are used in flexible systems where the filter compartment is separated from the impinger box with a flexible sample line as in Method 17, Flexible Method 5 and Compact Method 5 ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for RCRA, CERCLA, UST, and Brownfield site assessments and ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as possible. Carbon ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Part of the Macsa Lab range of laboratory sampling equipment, used for the accurate division of material samples to provide a final sample size for ...
-
Manufactured by Traceable Productsbased in USA
Stopwatch times to 9 hours, 59 minutes, 59 seconds, 99 hundredths. Accuracy is to 0.001%. Three-line display simultaneously shows running time, cumulative split, and interval split. Sixty memories recall all splits, display sample numbers 1-60, and show interval split longest, shortest, and average ...
-
Manufactured by Nucomatbased in BELGIUM
The automated UOSS system transfers used oil from a mother bottle to 7 daughter vials. 2 viscosity tubes, An IR tube, An ICP tube, A Karl Fischer vial, A TBN/TAN recipient, A recipient for flash point analysis. ...
-
Manufactured by Perma Pure LLC - a Halma Companybased in USA
The MD‐700 has been specifically developed for humidity control in particle measurement and aerosol analysis applications. In order to minimize particle losses, a laminar sample flow should be maintained through the flow path of the dryer. The MD‐700 addresses these performance needs while providing the moisture removal necessary to make accurate measurements across a wide range of ...
-
Manufactured by NIRA New Instruments and Research for Analysisbased in ITALY
Neptune803 is a robust and fast residual solvent analyzer for production areas, specifically developed for the flexible packaging industry. Neptune803 is specifically designed to be installed in process environment, resistant to thermal shocks and polluted air (the solvents present in the air does not affect results). Despite all traditional gas chromatographs, Neptune803 can be used by anyone, ...
-
Manufactured by GlobePharma Inc.based in USA
Standard single-sample design. 0.875” in diameter. One unit-dose sample is obtained at each sample port. The bottom most port starts at 1.5” from the tip. 40 different sizes of sample dies (0.1cc to 4.0cc in increments of 0.1cc) and 30 different sizes of split sample dies (0.1cc to 3.0cc in increments of 0.1cc) fit in this sampler. Stock sizes are 1ft with 5 ports, 2ft with 10 ports, ...
-
Manufactured by ProteinSimplebased in USA
ELISA, move over! The Simple Plex™ is here. Simple Plex assays are fully automated, multi-analyte immunoassays. Think mini ELISAs—just without the cross-reactivity. And the coolest part? The assays are powered by R&D ...
-
Manufactured by Traceable Productsbased in USA
Small size makes mini-clock perfect for work ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you