Sample Splitting Equipment For Monitoring And Testing Available In Pennsylvania
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Ripple divider for manual bulk material division into two representative samples by alternating sequences. Sample can be repeatedly halved for ratios of 1/2n. The maximum feed grain size should be approx. 1/3 smaller than the cell width of the divider. For higher demands on dividing accuracy and function, the max. grain size should be max. 1/3 of the cell width. Ripple dividers can be used for ...
-
PremiumManufactured by AMS, Inc.based in USA
Use the AMS Split Soil Core Samplers to easily extract relatively undisturbed soil core samples. The split soil core sampler has a vertically split cylinder. You can use the split soil core sampler without a liner to collect relatively undisturbed soil cores for immediate field examination and testing. Or, it can be used with a liner for collection of relatively undisturbed, sealed soil core ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as possible. Carbon ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Split Umbilical Cables are designed for added versatility for use in rigid and flexible configurations. They are constructed with the sample line and exit thermocouple split to the specified length. Split umbilicals are used in flexible systems where the filter compartment is separated from the impinger box with a flexible sample line as in Method 17, Flexible Method 5 and Compact Method 5 ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
New ASTM D8092 Standard Supports Direct Kinematic Viscosity Measurement. MiniVisc 3000 Series is a temperature controlled, portable kinematic viscometer. The MiniVisc 3000 series (formerly the SpectroVisc Q3000 Series) viscometers are the first truly portable, solvent-free, temperature-controlled kinematic viscometers, providing high-accuracy measurements for easy detection of viscosity ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The split barrel type sampling tubes are made of high-quality steel and feature an half open tip and sampling part. Excellent for rapid sampling in consistent soils, since its makes visual inspection of the samples easy and straightforward. The split barrel type sampling tubes can be pushed into the ground by means of a CPT penetrometer pushing rig, a DPT or SPT sounding rig or by means of ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for RCRA, CERCLA, UST, and Brownfield site assessments and ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as ...
-
Manufactured by Entech Instruments, Inc.based in USA
The 7032AQ / 7032AB Autosampler automates the introduction of up to 21 MiniCans™, Bottle-Vacs™, or Tedlar® bags into the 7200 for preconcentration. The 7032A(x) is ideal for gas-phase volatiles applications where concentrations are expected to be within 0.5–200 PPBv. For higher concentrations, a loop injection valve can be added (7032AQ-L, 7032AB-L) to allow much smaller ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
-
Manufactured by Ortoalresa S.A.based in SPAIN
The ball mill splits the sample by using repeated hits against the balls. It moves along an arc of a semi-circle due to the dragging of the pitcher in the cylinder motor. Isolated jars prevent the contamination of samples. Its function and design makes it suitable for mill works in laboratories of public works, manufacture of paints, ceramic, milling of raw materials for the manufacture of ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Riffle sample splitters are designed to divide samples of bulk materials into two parts of equal size and with equal content. See more: ...
-
Manufactured by Gilson Company, Inc.based in USA
The Gilson Universal Mini-Splitters are the smallest of Gilson’s exclusive Universal Splitter design, making them a great choice for powders and granular materials with top sizes less than 1/4in (6.4mm). Portable benchtop models are identical in structure and can easily be positioned ...
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
The Omnifit range of 'Cap-type' connectors is a versatile system for connecting different types of hardwall tubing such as PTFE, instantly. They can be used for sampling, flow-splitting, mixing and fluid line interconnection. Tubing sizes between 0.5 and 11mm OD can be connected using either Viton seals or PTFE cones. Large bore to large bore connector These are supplied with Viton seals in both ...
-
Manufactured by Glen Mills Incbased in USA
A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis. The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you