Sample Splitting Equipment For Monitoring And Testing Near Australasia
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The CCN-100/200 measures the count and size of individual aerosol particles that can form into cloud droplets. Its fast response time allows use in either airborne or ground-based stations. The CCN is available in single-column (CCN-100) or dual-column (CCN-200) versions. The CCN-100 is used for measurements of a single supersaturation, whereas the CCN-200 enables the user to measure two ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
New ASTM D8092 Standard Supports Direct Kinematic Viscosity Measurement. MiniVisc 3000 Series is a temperature controlled, portable kinematic viscometer. The MiniVisc 3000 series (formerly the SpectroVisc Q3000 Series) viscometers are the first truly portable, solvent-free, temperature-controlled kinematic viscometers, providing high-accuracy measurements for easy detection of viscosity ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
Studying the hygroscopic properties of aerosol particles offers insights into their effect on the earth’s radiative balance. By simultaneously exposing aerosol particles to different relative humidity, Ecotech’s Aerosol Conditioning System (ACS 1000) enables the effect of water uptake on the particles’ physical properties to be compared and measured by two real-time instruments ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Ripple divider for manual bulk material division into two representative samples by alternating sequences. Sample can be repeatedly halved for ratios of 1/2n. The maximum feed grain size should be approx. 1/3 smaller than the cell width of the divider. For higher demands on dividing accuracy and function, the max. grain size should be max. 1/3 of the cell width. Ripple dividers can be used for ...
-
based in UNITED KINGDOM
Advanced thermal desorber for uninterrupted monitoring of trace chemical vapours. TT24-7™ is a thermal desorption unit for continuous near-real-time (NRT) monitoring of VOCs and VVOCs in air or gas. TT24-7 ensures 100% data capture by using a twin-trapping design that can accommodate a wide range of sampling flow rates, and operates completely cryogen-free. It’s an ideal TD system for ...
-
Distributed by a1-cbissbased in UNITED KINGDOM
With an established reputation, the ARMS 2 is based on proven gas detection technologies with enhanced features and benefits configured to meet the specific requirements of the F-Gas Regulation. a1-cbiss have over 20 years experience in the design, manufacturing and installation of custom built gas monitoring and sampling ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as possible. Carbon ...
-
PremiumManufactured by AMS, Inc.based in USA
Use the AMS Split Soil Core Samplers to easily extract relatively undisturbed soil core samples. The split soil core sampler has a vertically split cylinder. You can use the split soil core sampler without a liner to collect relatively undisturbed soil cores for immediate field examination and testing. Or, it can be used with a liner for collection of relatively undisturbed, sealed soil core ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as little as ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Split Core Carbon Sampling Kit w/ Gas Powered REDI Boss Hammer, 1-1/4” Direct Push Thread. Carbon is critical to soil function, productivity, and structure. It is a large contributor to healthy soil conditions. Collecting core samples is an important step for determining carbon levels and subsequently improving soil health. Soil core samplers are designed to compress the soil as ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for RCRA, CERCLA, UST, and Brownfield site assessments and ...
-
Manufactured by Perma Pure LLC - a Halma Companybased in USA
The MD‐700 has been specifically developed for humidity control in particle measurement and aerosol analysis applications. In order to minimize particle losses, a laminar sample flow should be maintained through the flow path of the dryer. The MD‐700 addresses these performance needs while providing the moisture removal necessary to make accurate measurements across a wide range of ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Split Umbilical Cables are designed for added versatility for use in rigid and flexible configurations. They are constructed with the sample line and exit thermocouple split to the specified length. Split umbilicals are used in flexible systems where the filter compartment is separated from the impinger box with a flexible sample line as in Method 17, Flexible Method 5 and Compact Method 5 ...
-
Manufactured by Thermo Fisher Scientificbased in USA
Thermo Scientific FLASH 2000 NC Analyzer (formerly the Flash EA1112) delivers rapid, precise and environmentally friendly determinations of nitrogen and carbon in geological and agriculture materials. The Flash is capable of determining nitrogen and carbon in geological and agriculture materials such as soils, sediments or particulate materials obtained by filtration of sea, river, lake, or tap ...
-
Manufactured by FEP Technology Limitedbased in CHINA
The FEP-100 Flue Gas Ultraviolet Analyzer, based on UV absorption spectroscopy technology and chemometric algorithms, can be used to measure the concentration of SO2, NO, NO2, O3, NH3, CO, CO2, Cl2, O2, H2S, HC2l, CH3I, CH2O and other gases. With high accuracy, high reliability, fast response, and wide applicability, it can be widely used in online environmental monitoring, industrial control, ...
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
The Omnifit range of 'Cap-type' connectors is a versatile system for connecting different types of hardwall tubing such as PTFE, instantly. These valved versions can be used for sampling, flow-splitting, mixing and fluid line interconnection. Tubing sizes between 0.5 and 11mm OD can be connected using either Viton seals or PTFE ...
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
The Omnifit range of 'Cap-type' connectors is a versatile system for connecting different types of hardwall tubing such as PTFE, instantly. They can be used for sampling, flow-splitting, mixing and fluid line interconnection. Tubing sizes between 0.5 and 11mm OD can be connected using either Viton seals or PTFE cones. Large bore to large bore connector These are supplied with Viton seals in both ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you