Sampling Bags Equipment For Monitoring And Testing Near Australasia
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling and shipping ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling and shipping conditions. ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling and shipping ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Natural Gas Sampling System 3000 is designed for very fast conditioning of samples from a pressurized natural gas source. Can be connected directly to a pipeline or a sampling cylinder containing compressed natural gas. The outlet of the sampling system can be connected directly to athe UT-3000 monitor for direct Hg analysis or connected to Tedlar® bags for posterior laboratory ...
-
Manufactured by Sigma-Aldrichbased in USA
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
Manufactured by Sigma-Aldrichbased in USA
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
Manufactured by Sigma-Aldrichbased in USA
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling and shipping conditions. ...
-
Manufactured by Sigma-Aldrichbased in USA
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling and shipping conditions. ...
-
Manufactured by Sigma-Aldrichbased in USA
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling and shipping ...
-
Manufactured by Sigma-Aldrichbased in USA
General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most demanding sampling ...
-
Manufactured by Hach - Veraltobased in USA
Chlorine, Coliform, and pH Test Kit w/UV (240 Vac) Lamp & Incubator - Model CEC-2: Coliforms are reliable indicator organisms for testing water quality because they travel with disease-producing microorganisms and are easy to isolate. The presence of coliforms in drinking water indicates the water may not be suitable for drinking and may need to treated with a disinfectant such as chlorine. ...
-
Manufactured by Hach - Veraltobased in USA
Chlorine, Coliform, and pH Test Kit w/UV (120Vac) Lamp & Incubator - Model CEC-2: Coliforms are reliable indicator organisms for testing water quality because they travel with disease-producing microorganisms and are easy to isolate. The presence of coliforms in drinking water indicates the water may not be suitable for drinking and may need to treated with a disinfectant such as chlorine. ...
-
based in UNITED KINGDOM
ACTI-VOC is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling ...
-
based in UNITED KINGDOM
UNITY–CIA Advantage-xr™ is an inert, multi-channel system for the automated analysis of VOCs in canisters and bags. It has capacity for up to 27 channels, operates completely without cryogen, and is also compatible with on-line and tube-based sampling. It’s the ultimate system for high-throughput laboratories running the canister-based methods US EPA TO-15/TO-15A and Chinese EPA ...
-
based in AUSTRIA
The Romer Labs Sponge-Stick is a 3″ x 1.5″ (7.5 cm x 3.5 cm) compressed cellulose sponge attached to a quick-release handle, pre-moistened with 10 ml buffer of choice and individually packaged in a vapor-barrier foil pouch or already in a sampling bag. The quick-release handle provides an extra level of convenience and reliability. It is designed to release the sponge into the sample ...
-
Manufactured by Jensen Inert Productsbased in USA
ALTEF is a proprietary fluoropolymer film devel oped specially for the air sampling market.ALTEF meets or exceeds many of the desired characteristics of Tedlar at a significantly lower ...
-
Manufactured by Jensen Inert Productsbased in USA
Multi-Layer Foil Bags are ideal for containing low molecular weight gases. The 2 layers of aluminum film provide a great barrier to gases permeating through the walls of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you