Sampling Pumps Equipment For Monitoring And Testing Available In Idaho
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
ShowcaseManufactured by Randolph Austin Companybased in USA
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary ...
-
PremiumManufactured by Labconco Corporationbased in USA
FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous ...
-
PremiumManufactured by Labconco Corporationbased in USA
FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The K30 10% (100,000 ppm) carbon dioxide sensor module is a maintenance-free transmitter module intended to monitor high levels of CO2 found in storage tanks or biological applications. It is an accurate, low-cost solution for OEMs products like CO2 safety alarms or leak ...
-
PremiumManufactured by Labconco Corporationbased in USA
FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. An optional stepped barb can be threaded on each end for use of up to 1/2" tubing. ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
UV 3000 Series: UV 3000, UV 3000P, UV3000C-RM. UV-DOAS based Continuous Emissions Monitoring. Cross stack, In-Situ probe and Parallel cell models available. Combustion gases, BTEX, SVOC’s, chlorine, ammonia, and more. Application specific ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 Micro Air Monitoring System is a small online environmental monitoring system based on high precision(ppb level) gas sensor. It provides flexiable sensor combination scheme and modular design, as well as online monitoring of PM10,PM2.5,SO2,NO2,O3,CO,VOCs,temperature, humidity and other factors in the atmosphere. Special factors can also be qulckly configured according to the actual ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our new lightweight and compact external sampling ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
0.1 micron high capacity groundwater filter each. The SingleSample® High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. Approximately 600 cm² of surface ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against an in-line N.I.S.T. traceable laminar flow ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Dimensions: 19” x 17” x 12”. Weight approx.: 25 lbs. Basic: O2 – CO. 2 Sensors – 4 sensor inputs max. Recommended: use with Peltier Gas Dryer IMR ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
5.0 micron high capacity groundwater filter each. The SingleSample® High Capacity, Disposable Groundwater Filter Capsule is designed specifically for field filtering groundwater samples for metal analysis with 1/8" NPT threaded inlet and outlets with stepped hose adapter on the inlet side for in line filtering of pumped samples with up to 3/8" ID tubing. Approximately 600 cm² of surface ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 3-300A heated FID was designed in the early 80's as a space saving alternative to our VE7. Also the 3-300A was a "first" in the industry due to its sample filter back purge feature. It is also a very much liked 19" rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgivingness and long standing accuracy and sensitivity. The 3-300A is fully ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you